1. Question/Quality check
Production plan
Create a flow chart to describe the manufacture of your lamp. You must try to use all of the shapes available.
Start/Finish
Question/Quality check
Process/Step
Predicted Time
Changes/ modifications

2. Manufacturing diary Stage Materials Used Tools/ equipment, processes
Safety Procedures
How will Quality Control/ tolerance tests be carried out
Reviewing quality control/ tolerance tests
Manufacturing the base of the lamp
MDF
Metal Rule, fret saw, belt sander, glass paper, hole saw, pillar
The fret saw, pillar drill and belt sander are dangerous workshop machines. When using them I wore goggles and an apron and only used them after having proper training. I made sure I had no loose items that could get caught in the belt sander or pillar drill.
The hole that has been cut must be within +/- 1mm of the desired diameter and will be checked with a calliper. The base must be checked for smooth finishing that will give no splinters.
The hole cut had a 21mm diameter which is +1mm larger than the desired hole, therefore the hole is reasonable in quality. The base was perfectly smooth and has no sharp edges or possible splinters.

3. Tools/ equipment, processes Safety Procedures
Stage
Materials Used
Tools/ equipment, processes
Safety Procedures
How will Quality Control/ tolerance tests be carried out
Reviewing quality control/ tolerance tests
Manufacturing the base of the lamp
MDF
Metal Rule, fret saw, belt sander, glass paper, hole saw, pillar
The fret saw, pillar drill and belt sander are dangerous workshop machines. When using them I wore goggles and an apron and only used them after having proper training. I made sure I had no loose items that could get caught in the belt sander or pillar drill.
The hole that has been cut must be within +/- 1mm of the desired diameter and will be checked with a calliper. The base must be checked for smooth finishing that will give no splinters.
The hole cut had a 21mm diameter which is +1mm larger than the desired hole, therefore the hole is reasonable in quality. The base was perfectly smooth and has no sharp edges or possible splinters.

4. Final ? (product images from all different views)
Problems During making/planning
Solutions/Changes made.
Final ? (product images from all different views)

5. Final ? (product images from all different views)
Problems During making/planning
Solutions/Changes made.
Final ? (product images from all different views)