1. Part general information (概述) Injection system(注塑系统)
Z _V
Part review items:
Part general information (概述)
Injection system(注塑系统)
Parting line (分模线)
Part structure (undercut..) 产品结构
Draft (出模斜度分析)
Ejection system(顶出系统)
Mold layout(模具排位)
2018/9/12 1
2018/9/12

2. General information 产品概述
Z _V
General information 产品概述
1. Plastic material（材料）:
PBT ULTRADUR B4330 G6 HR ( Black )
2. Shrinkage rate（缩水率）:
1.018 (?)
3. Cavity No.（模穴数）: 1
4 . Mold type (模具类型):
2 plate
5. Cavity & core steel: （前后模材料）
Cavity: HRC52-54
Core : HRC50-52
6. Surface finish （表面要求）
Cavity:
Core:
part size：
57.88x20.4x16.94
8g/pcs
2018/9/12 2
2018/9/12

3. Injection system(注塑系统)
Z _V
Injection system(注塑系统)
cold runner+subgateØ1.2
2018/9/12 3
2018/9/12

4. Z8227.74-1_V29069333 Parting line 分模线 CAVITY CORE PL in red 2018/9/12 4
2018/9/12

5. Z8227.74-1_V29069333 Part structure产品结构1 cavity Ø2.5 inser pin
Ø2.6 stampe
2018/9/12 5
2018/9/12

6. Z8227.74-1_V29069333 Part structure产品结构2 metal part hole slider
suggest make text reccess
2018/9/12 6
2018/9/12

7. Z8227.74-1_V29069333 Part structure产品结构3 please send us the metal part
core inserts
holes for metal part
core inserts
2018/9/12 7
2018/9/12

8. more straight cable, to have good seal
Z _V
Part structure产品结构4
more straight cable, to have good seal
2018/9/12 8
2018/9/12

9. Z8227.74-1_V29069333 Other (其他分析) average thickness2.2mm
2018/9/12 9
2018/9/12

10. green surface no ddraft angle
Z _V
Draft (出模斜度分析)
green surface no ddraft angle
2018/9/12 10
2018/9/12

11. suggest add material 1.37 at parting line
Z _V
Draft (出模斜度分析)
shart steel will cause
suggest add material 1.37 at parting line
2018/9/12 11
2018/9/12

12. green surface no draft angle at slider moving direction
Z _V
Draft (出模斜度分析)
slider
green surface no draft angle at slider moving direction
2018/9/12 12
2018/9/12

13. Z8227.74-1_V29069333 Ejection system 顶出系统 ￠4 ￠3 shoulder ejector￠1.5
2018/9/12 13
2018/9/12

14. Z8227.74-1_V29069333 Mold layout 模具排位 sprue offset 15mm 2018/9/12 14
2018/9/12