1. Inkist™ the Automatic Refill Devices
Ink refill specialist
Inkist™ the Automatic Refill Devices
INKIST/itwo Inc.

2. Product Introduction
INKIST - The World first Automated Ink refilling kit
is a patented product
can refill without needle, syringe, electricity
has classy design
saves costs and environment
supports major ink printers including
HP, EPSON, CANON,
LEXMARK, BROTHER
and SAMSUNG

3. How to use - Video

4. Advantages Economic performance Easy to use Classy Design
80% cost save than the original brand
Easy to use
Automatic refill
Classy Design
Eco-friendly product

5. Procedure 1 – Cleaning for start
Open the kit as the picture above illustrated.
Make sure the switch turned
“OFF”
Cleaning procedure
If the nozzle of cartridge is not clean, drop some cleaning fluid on the nozzle, and wait for 10 seconds, then clean with a cleaning stick enclosed.

6. Procedure 2 – cartridge Install
[Pressure inside of the kit refills ink automatically]
Stick the kit with fingers like picture①, and install cartridge to the kit like picture②.
Place the cartridge(30 °) to the edge of rubber, and push the cartridge towards the back of the product until it clicks into place.
Please make sure the cartridge is installed correctly.
Unless it is installed correctly, the ink could be leaking

7. Procedure 3 – Install Ink
Push the safety
pin and remove it
Install Ink pack
Insert an ink pack into the back holder and push it down until it sounds “click” and push the safety pin and remove it.
Wait for 15 minutes
Turn the switch “ON” and wait for 15 minutes.
[HP, SAMSUNG, CANON, LEXMARK]

8. Procedure 4 – Refill and Clean
Turn the switch “OFF” after 15 minutes.
Clean nozzle and the kit with the cleaning stick.
Put the refilled cartridge into the printer, and print.
Keep the ink pack on the kit till next refilling time in order to keep the kit clean.

9. Contents in a Kit Inkist™ Body Inkist™ Packs(2EA) Cleaning Kits
2 Ink Packs
Cleaning Kits

10. Q A
&