1. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Schematics of pipeline dent

2. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Cross-section of problem at the pipe midspan

3. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Material properties: (a) Stress–strain curves of tensile specimen-full range, (b) stress–strain curves of tensile specimen-zoom at elastic and initial plastic portion, and (c) cyclic stress versus cyclic strain [16]

4. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Quarter symmetry model of the pipe indentation FEA model (dimensions in millimeters)

5. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Mesh of indentation problem: (a) overall and (b) finer mesh closer to indenter

6. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Convergence check of Von Mises strains at the dent peak

7. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Comparison of indentation load–displacement between FEA and experiment

8. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Comparison of circumferential strain history between FEA runs and experimental results

9. Date of download: 12/27/2017
Copyright © ASME. All rights reserved.
From: Investigation and Validation of Finite Element Analysis Material Modeling for Integrity Assessment of Indented Pipe Under Static and Cyclic Loading
J. Pressure Vessel Technol. 2013;135(2): doi: /
Figure Legend:
Comparison of axial strain history between FEA runs and experimental results