1. Integration
Bacnet Server
HDL-BN-4096

2. Introduction
HDL-BN-4096, only need to use the special firmware to upgrade the SB-DN-1IP or HDL-MBUS01IP.431. It builds in the bacnet protocol, allows BA and BMS system to monitor and control HDL system, like lighting, HVAC, floor heating, etc.
Note: HDL devices should be configured by HDL buspro software when controlled by Bacnet System. Open the HDL buspro software, search and set parameters of the HDL-BN-4096
And HDL can also control Bacnet AC system. You can refer to another PPT (Integration_AC System)

3. System connection

4. Basic Information
The Bacnet server
default IP is

5. Configuration 1.Bacnet has different type: AI, AO,
AV, BI, BO,BV, MI, MO, MV, Other.
Different type can control different
targets.
2. The Bacnet ID is generated
automatically according to the Bacnet
ID type and ID value.
3. Type of control target. It is the HDL
control type.
4. ID of HDL devices

6. Bacnet Objects AI: Analog Input AO: Analog Output
AV: Analog Value, used to define start-stop commands of devices
BI: Digital Input (Binary Input)
BO: Digital Output (Binary Output)
BV: Digital Output (Binary Value), used to define start-stop commands of devices
MI: Multi State Input
MO: Multi State Output
MV: Multi State Value

7. Application Control the CH3 of HDL dimmer：
Setting in HDL Buspro software

8. Application
Setting in Bacnet Explorer
PS: Type 100: it means turn on the channel
0:it means turn off the channel