1. Decimals
Pages 60 – 95

2. Understanding Decimals
Pages 62 – 63
Understanding Decimals
Like a fraction, a decimal shows a part of a whole. Decimals divide a whole into 10 parts or 100 parts or 1,000 parts and so on. You have used decimals since you first handled money.
Decimals get their names from the number of places on the right side of the decimal point. The decimal point separates whole numbers from decimals. A place is the position for a digit. The decimal point itself does not take up a place.

3. _, _ _ _,_ _ _._ _ _ _ _ _ Place Value Names Pages 62 – 63
hundred thousands
hundred thousandths
ten thousands
ten thousandths
thousands
hundreds
hundredths
thousandths
millions
millionths
_, _ _ _,_ _ _._ _ _ _ _ _
tens
ones
tenths

4. Why do they have those names?
Pages 62 – 63
Place Values
Why do they have those names? 8
1000
600 70 2
100 3 10 9

5. Pages 62 – 63
Mixed Decimals
Mixed decimals are numbers with digits on both sides of the decimal point. $4.95 is a mixed decimal. It means 4 whole dollars and 95/100 of a dollar.
As you move to the right in the decimal system, each place means that the whole has been divided into more parts, therefore, the values of the decimal places get smaller.

6. Page 64
Reading Decimals
Remember that a decimal gets its name from the number of places at the right of the decimal point.
To read a decimal, count the places at the right of the decimal point.
With mixed decimals, watch for the word & which separates whole numbers from decimal fractions.

7. Page 65
Writing Decimals
To write decimals from words, be sure that you have the correct number of decimal places.
Use zeros to hold places where necessary.
Remember, again, that the word & separates whole numbers from decimal fractions in mixed decimals.
Watch where zeros hold places.

8. Getting Rid of Unnecessary Zero
Page 66
Getting Rid of Unnecessary Zero
Consider the number & decide whether each zero is necessary.
The zero left of the digit 2 is unnecessary
The zero right of the 2 is necessary because it keeps the 2 in the tens place.
The zero right of 6 is unnecessary
The number can be correctly written as 20.06
A decimal with no whole number is often written with a zero in the units place. The decimal .8 & 0.8 are both correct forms for eight tenths.

9. Changing Decimals to Fractions
Page 67
Changing Decimals to Fractions
To change a decimal to a fraction (or to change a mixed decimal to a mixed number), write the digits in the decimals as the numerator.
Write the denominator according to the number of decimal places.
Then reduce the fraction.

10. Changing Fractions to Decimals
Page 68
Changing Fractions to Decimals
Remember that a fraction can be understood as a division problem.
To change a fraction to a decimal, divide the denominator into the numerator.
To divide, add a decimal point & zeros to the numerator.
Usually two zeros are enough.
Then bring the point up in the answer.

11. Comparing Decimals Page 70
When you look at a group of decimals, it is sometimes difficult to tell which decimal is the largest. To compare decimals, give each decimal the same number of places by adding zeros. This is the same as giving each decimal a common denominator. The zeros you add do not change the value of the decimals.
Don’t write the extra zeros in the final answer.

12. Page 71
Rounding
To round a number, you must know the place value of each digit in the number.
To round a decimal:
Underline the digit in the place to which you want to round.
If the digit to the right of the underlined digit is 5 or more, add one to the underlined digit.
If the digit to the right of the underlined digit is 4 or less, do not change the underlined digit.
Drop the digits to the right of the underlined digit.

13. Page 73
Adding Decimals
To add decimals, line up the decimal points under each other. (Remember that whole numbers have a decimal point at its right.)
This makes it so that you are adding the same place values to each other.
Then add

14. Subtracting Decimals Page 75
To subtract decimals line up the decimals with the points under each other just like in addition.
Remember to put a point to the right of a whole number. Put zeros at the right until each decimal has the same number of places.
You will need the zeros for borrowing.

15. Multiplying Decimals Pages 79 – 81
Multiply as you would any whole numbers.
To find the placement of the decimal in the product (the answer)
Count the decimal places in each factor (the numbers you multiplied).
Put the total number of decimal places in the product. (Sometimes you will need to put extra zeros in your answer.)

16. Multiplying Decimals by 10, 100, & 1,000
Page 82
Multiplying Decimals by 10, 100, & 1,000
To multiply a decimal by 10, move the decimal point one place to the right.
To multiply a decimal by 100, move the decimal point two places to the right.
To multiply a decimal point by 1,000, move the decimal point three places to the right.
You may have to add zeros to get enough places.

17. Dividing Decimals by Whole Numbers
Page 86
Dividing Decimals by Whole Numbers
To divide a decimal by a whole number, line up the problem carefully.
Then divide as you would a whole number & bring the decimal point up into quotient (the answer) above its position in the problem.
Sometimes you will need to put zeros in your answers.

18. Dividing Decimals by Decimals
Pages 87 – 88
Dividing Decimals by Decimals
To divide a decimal by a decimal, first make a new problem.
Change the number you are dividing by (the divisor) into a whole number.
You can change the divisor into a whole number by moving the decimal point to the right end.
Then move the decimal point in the other number (the dividend) the same number of places.
Sometimes you will have to put extra zeros in the dividend.

19. Dividing Whole Numbers by Decimals
Page 89
Dividing Whole Numbers by Decimals
To divide a whole number by a decimal, remember to put a decimal point at the right of the whole number.
Then move the points in both the divisor and the dividend.
You will have to put zeros in the dividend.
Not every division problem comes out even. When this happens, choose a place to round to (unless it is chosen for you in the directions). Then divide one place beyond the place you want to round to.

20. Dividing Decimals by 10, 100, & 1,000 Page 90
To divide a decimal by 10, move the decimal point one place to the left
To divide a decimal by 100, move the decimal point two place to the left
To divide a decimal by 1,000, move the decimal point three place to the left
You may have to add zeros to get enough places.

21. Dividing to Fixed Place Accuracy
Page 91
Dividing to Fixed Place Accuracy
Adding zeros to a division of decimals problem does not always result in a problem that divides evenly.
To get a division answer that is accurate to the nearest tenth, divide to the hundredths place & round the answer to the nearest tenth.
This is called dividing to fixed place accuracy.