Presentation is loading. Please wait.

Presentation is loading. Please wait.

Results from Collimator Hardware Commissioning during EYETS 2016/2017 8th May 2017 LHC Collimation Working Group #217 I. Lamas Garcia, on behalf.

Published byLoreen Reynolds Modified over 6 years ago

Similar presentations

Presentation on theme: "Results from Collimator Hardware Commissioning during EYETS 2016/2017 8th May 2017 LHC Collimation Working Group #217 I. Lamas Garcia, on behalf."— Presentation transcript:

1 Results from Collimator Hardware Commissioning during EYETS 2016/ th May 2017 LHC Collimation Working Group # I. Lamas Garcia, on behalf of EN-STI 08 May 2017 I. Lamas Garcia – EN-STI

2 Presentation Scope Collimators Commissioning check list (link):
Electro/Mechanical checks Cooling circuit checks Alignment checks General checks Functional tests Collimator Commissioning during EYETS 2016/2017 08 May 2017 I. Lamas Garcia – EN-STI

3 Collimators electro/mechanical checks
Protection elements in place Bellows status and connection to beam pipe Roller screws status/grease Linear guides 5th axis status/reduction type BPM and electronic connectors 08 May 2017 I. Lamas Garcia – EN-STI

4 Collimators cooling circuit checks
Water valves opened after bake-out Cooling water flow Flexible and rigid cooling pipes and gyrolock connections No water leaks 08 May 2017 I. Lamas Garcia – EN-STI

5 Collimators alignment checks
Tilt plate fixed Plug-in fixed Mire support engraved and sticker up to date 08 May 2017 I. Lamas Garcia – EN-STI

6 Collimators general checks
General aspect Signs of dents, abrasions, discolorations, interferences, etc. Bar code present Pictures 08 May 2017 I. Lamas Garcia – EN-STI

7 Collimators standard functional tests
Sequence cycle jaw in-out Sequence cycle 5th axis if operational Sound record of the movement Jaws positioned a +15mm For the TCTWs, more info in Adriana's presentation 08 May 2017 I. Lamas Garcia – EN-STI

8 Collimator Commissioning during EYETS 2016/2017
Point 1 Commissioned 15th-16th March: TCL.5L1.B2 TCL.4L1.B2 TCTPH.4L1.B1 TCTPV.4L1.B1-> needed 5th axis switch cam readjustment TCL.6L1.B2 TCTPV.4R1.B2 TCTPH.4R1.B2 TCL.4R1.B1 TCL.5R1.B1 TCL.6R1.B1 08 May 2017 I. Lamas Garcia – EN-STI

9 Collimator Commissioning during EYETS 2016/2017
Point 2 Commissioned 17th and 23th March TCTPH.4L2.B1 TCTPV.4L2.B1 TDI.4L2 TCDD.4L2 TCDIV.29012 TCDIH.29050 TCDIH.29205 TCDIV.29234 TCDIH.29465 TCDIV.29509 TCLIA.4R2 TCTPV.4R2.B2 TCTPH.4R2.B2 TCLIB.6R2.B1 08 May 2017 I. Lamas Garcia – EN-STI

10 Collimator Commissioning during EYETS 2016/2017
Point 3 Commissioned the 29th , 30th and 31th March TCLA.7L3.B2 TCP.6L3.B1 TCSG.5L3.B1 TCLA.6L3.B2 TCSG.B5L3.B2 TCLA.B5L3.B2 TCSG.A5L3.B2 TCLA.A5L3.B2 TCSG.4L3.B2 TCSG.4R3.B1 TCLA.A5R3.B1 TCSG.A5R3.B1 TCLA.B5R3.B1 TCSG.B5R3.B1 TCLA.6R3.B1 TCSG.5R3.B2 TCP.6R3.B2 TCLA.7R3.B1 08 May 2017 I. Lamas Garcia – EN-STI

11 Collimator Commissioning during EYETS 2016/2017
Point 5 LSS5R Commissioned 14th March TCTPV.4R5.B2 TCTPH.4R5.B2 (New TCTW with I2PS sensors)* TCL.4R5.B1 TCL.5R5.B1 TCL.6R5.B1 *TCTPH.4R5.B2 wire tests 22th March (more info in Adriana's presentation) 5th axis issue found: steps lost during movement Intervention on the 24th March to replace the reductor subassy. Cycling tested done, no steps lost. TCTPH.4R5.B2 wire tests final validation on the 11th April. 5th axis steps lost during movement. Intervention on the 12th April to dismount the reductor subassy, clean and grease it and mounted back. 3 cycles performed. No step lost. Video link 08 May 2017 I. Lamas Garcia – EN-STI

12 Collimator Commissioning during EYETS 2016/2017
Point 5 LSS5L Commissioned 31th March TCL.5L5.B2 TCL.4L5.B2 (New TCTW with I2PS sensors) TCTPH.4L5.B1 TCTPV.4L5.B1 TCL.6L5.B2 TCL.4L5.B2 wire tests 5th April (more info in Adriana's presentation) TCL.4L5.B2 wire tests final validation 11th April 08 May 2017 I. Lamas Garcia – EN-STI

13 Collimator Commissioning during EYETS 2016/2017
Point 6 Commissioned the 21th March TCSP.A4R6.B1 TCSP.A4L6.B2 TCDIV.88123 08 May 2017 I. Lamas Garcia – EN-STI

14 Collimator Commissioning during EYETS 2016/2017
Point 7 Commissioned 15th March - 5th April TCLA.A7L7.B2 TCLA.D6L7.B2 TCLA.C6L7.B2 TCP.D6L7.B1 TCP.C6L7.B1 (New TCPP) TCP.B6L7.B1 TCLA.B6L7.B2 TCSG.A6L7.B1 TCLA.A6L7.B2 TCSG.6L7.B2 TCSG.E5L7.B2 TCSG.D5L7.B2 TCSG.B5L7.B1 TCSG.A5L7.B1 TCSG.B5L7.B2 TCSG.D4L7.B1 TCSG.A4L7.B2 TCSG.B4L7.B1 TCSG.A4L7.B1 TCSG.A4R7.B1 TCSG.A4R7.B2 TCSG.B4R7.B2 TCSPM.D4R7.B2 (New TCSPM) TCSG.D4R7.B2 (collimator changed of control system attribution) TCSG.B5R7.B1 (new control system) TCSG.A5R7.B2 TCSG.B5R7.B2 TCSG.D5R7.B1 TCSG.E5R7.B1 TCSG.6R7.B1 TCLA.A6R7.B1 TCSG.A6R7.B2 TCLA.B6R7.B1 TCP.B6R7.B2 TCP.C6R7.B2 TCP.D6R7.B2 TCLA.C6R7.B1 TCLA.D6R7.B1 TCLA.A7R7.B1 08 May 2017 I. Lamas Garcia – EN-STI

15 Collimator Commissioning during EYETS 2016/2017
Point 8 Commissioned the 20th March TCLIB.6L8.B2 TCTPH.4L8.B1 TCTPV.4L8.B1 TCLIA.4L8 TCTPV.4R8.B2 TCTPH.4R8.B2 TDI.4R8 TCDIH.87441 TCDIV.87645 TCDIV.87804 TCDIH.87904 TCDIV.88123 TCDIH.88121 08 May 2017 I. Lamas Garcia – EN-STI

16 Thank you! 08 May 2017 I. Lamas Garcia – EN-STI

Download ppt "Results from Collimator Hardware Commissioning during EYETS 2016/2017 8th May 2017 LHC Collimation Working Group #217 I. Lamas Garcia, on behalf."

Similar presentations

ATD Assembly. ATD Assembly #1 Dewar Assembly #1 Status: Dewar has been completely assembled and vacuum tested. No vacuum leaks were detected on the outer.

ATD Assembly. ATD Assembly #1 Dewar Assembly #1 Status: Dewar has been completely assembled and vacuum tested. No vacuum leaks were detected on the outer.
Progress and Plan for Superconducting RF Cavity RF Group.

Progress and Plan for Superconducting RF Cavity RF Group.
R.Giachino / M.Albert Be/op 5 April 2015 LHC Machine check out https://indico.cern.ch/category/6386/ 1v1.

R.Giachino / M.Albert Be/op 5 April 2015 LHC Machine check out 1v1.
Status at DORIS Hall Argus was removed by end of march Argus Parts (except 4 heavy pieces) shipped to Hall 1 Rails of electronics hut have to be extended.

Status at DORIS Hall Argus was removed by end of march Argus Parts (except 4 heavy pieces) shipped to Hall 1 Rails of electronics hut have to be extended.
OLYMPUS Collaboration Meeting Cooling Water David Rodríguez Piñeiro Mainz University OLYMPUS Collaboration Meeting DESY 23. 02. 2010.

OLYMPUS Collaboration Meeting Cooling Water David Rodríguez Piñeiro Mainz University OLYMPUS Collaboration Meeting DESY
W83-A-0501 Pump ZPU 01 / 02 1 High Pressure Lubricating Pump Type ZPU 01 / 02.

W83-A-0501 Pump ZPU 01 / 02 1 High Pressure Lubricating Pump Type ZPU 01 / 02.
SLAC rotating collimator for HiRadMat beam tests 14 March 2014 S. Redaelli, A. Bertarelli, CERN T. Markiewicz, SLAC US LHC Accelerator Research Program.

SLAC rotating collimator for HiRadMat beam tests 14 March 2014 S. Redaelli, A. Bertarelli, CERN T. Markiewicz, SLAC US LHC Accelerator Research Program.
O. Aberle, EN/STI/TCD 16 October 2014 WORKSHOP ON R2E, RADIATION AND AVAILABILITY AT THE LHC COLLIMATOR EQUIPMENT AND INTERVENTIONS, OPTIMIZATION OF DOSE/INTERVENTION.

O. Aberle, EN/STI/TCD 16 October 2014 WORKSHOP ON R2E, RADIATION AND AVAILABILITY AT THE LHC COLLIMATOR EQUIPMENT AND INTERVENTIONS, OPTIMIZATION OF DOSE/INTERVENTION.
LIU – TCDI. INTEGRATION STATUS 1 ST APRIL 2015 Frédéric Galleazzi EN/MEF/INT Antoine Kosmicki EN/MEF/INT EDMS : 1502092.

LIU – TCDI. INTEGRATION STATUS 1 ST APRIL 2015 Frédéric Galleazzi EN/MEF/INT Antoine Kosmicki EN/MEF/INT EDMS :
TCLDA Design status Collimation Upgrade Specification Meeting 18-09-2015 L. GENTINI.

TCLDA Design status Collimation Upgrade Specification Meeting L. GENTINI.
Status of LS1 collimator maintenance O. Aberle – 03/03/14 With input from P. Bestmann, S. De Man and J. Lendaro.

Status of LS1 collimator maintenance O. Aberle – 03/03/14 With input from P. Bestmann, S. De Man and J. Lendaro.
12.05.2005 A. Bertarelli CERN TS – MME Group 1 CERN European Organization for Nuclear Research Actuating system of the LHC Collimators (Phase 1) Main Features.

A. Bertarelli CERN TS – MME Group 1 CERN European Organization for Nuclear Research Actuating system of the LHC Collimators (Phase 1) Main Features.
Collimation Working Group #137 Collimator Alignment Controls Patrick Bestmann20/02/2012.

Collimation Working Group #137 Collimator Alignment Controls Patrick Bestmann20/02/2012.
LHC machine status ~ Daily Summary ~ Daily beam commissioning meeting Week 42 - October 14 th, 2015 CERN, Geneva, CH M. Lamont and S. Redaelli for the.

LHC machine status ~ Daily Summary ~ Daily beam commissioning meeting Week 42 - October 14 th, 2015 CERN, Geneva, CH M. Lamont and S. Redaelli for the.
YETS activities in n_TOF O. Aberle, S. Montesano (EN/STI)

YETS activities in n_TOF O. Aberle, S. Montesano (EN/STI)
2/17/2016 Recycler -Gattuso Recycler Shut Down Status  Flying Wire Status  Wire Vacuum Certified  Tunnel Bake Prep status Disconnection of BPM, Correctors,

2/17/2016 Recycler -Gattuso Recycler Shut Down Status  Flying Wire Status  Wire Vacuum Certified  Tunnel Bake Prep status Disconnection of BPM, Correctors,
Updated Design of TCLD whit reduced jaw length Collimation Upgrade Specification meeting 18-10-2013 L. GENTINI.

Updated Design of TCLD whit reduced jaw length Collimation Upgrade Specification meeting L. GENTINI.
4 December 2007Sylvain Weisz - LEMIC1 Status of LHC installation.

4 December 2007Sylvain Weisz - LEMIC1 Status of LHC installation.
06:00 – Ongoing injection problems on beam 2  07:42 – Start of injection investigations  11:11 – Injection problem fixed. Resteering of transfer line.

06:00 – Ongoing injection problems on beam 2  07:42 – Start of injection investigations  11:11 – Injection problem fixed. Resteering of transfer line.
LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 30 Jan 2007 No 1 /13 LARP Phase II Secondary Collimator RC1 Collimator Development and Test Program Status.

LARP LHC PHASE II COLL RC1 TESTS - S. Lundgren 30 Jan 2007 No 1 /13 LARP Phase II Secondary Collimator RC1 Collimator Development and Test Program Status.

Similar presentations

Ads by Google