1. The mission of YY-W2xx Server Chassis
Quick view at products spec.
The mission of YY-W2xx Server Chassis
Versatile
High reliable rackmount
Pedestal server chassis
It is very flexible, could be rack mounted, could be stand alone, single or redundant power supplies, and supports hard drives hot swappable in built in special design backplane or in modules.
Either IDE hard drives or 1" Ultra160 SCSI hard drives. This chassis enables you to meet a variety of customer needs with one chassis.
Application
Power User Workstation
Small and Medium Business Pedestal Server

2. Multi-function chassis, Pedestal (YY-W2xx) and Rackmount(YY-R5xx)
Case dimension
220mm W x 600mm D x 427mm H
Motherboard configuration
extended ATX, ATX , Micro ATX
Drive configuration (3-combination)
8 * 5.25" exposed + 2*3.5” hidden or
5 * 5.25” exposed + 7*3.5" hidden
System cooling fan
Built-in 12 cm Ball-bearing fan + 2*6cm rear-mounted
Front panel control
Power switch , Reset switch, USB*2
Front panel LED
Power, HDD, Fan Alarm , HDD Failure LED , Lan*2, USBx4(Optional)
Materials
Metal:Recyclable SECC metal
Plastic :UL approved flame retardant parts
Steel chassis t0.8~1.2mm
R501
W201
W202
Emissions
Designed to meet FCC class B-47CFR part 15 /IEC/CISPR 22
Net Weight
14.0kg without PSU
Color
Cool gray, Black
Power Supply
EPS12V, ATX12V SINGLE OR REDUNDANT P’SU

3. YY-W201 Server Chassis, Pedestal & 5U rackmount versatile
Single ATX/EPS12V or Redundant P’su
Flexible and easy install drive bays.
Type A:
8x5.25” exposed
Type B:
5x5.25”exposed+ 5x3.5” HDD hidden
Type C:
4x5.25”exposed+ 6x3.5” HDD hot swappable w/backplane
Built in 1x12cm DC fan for hard drives and core areas
Optional 2x6cm DC fan for AGP/PCI cards
Optional card clamp holder for fixing add-on card
Allow EEB3.5 M/B (12”x13”)
CEB1.1 M/B (12”x10.5”)
Optional Intrusion Switch

4. YY-W201 Server Chassis, Pedestal & 5U rackmount versatile
With CONVERTIBLE DRIVE BAYS, 3 BAYS OF 5.25” COULD BE ALWAYS KEPT IN HORIZONTAL
VERSATILE 5.25” DRIVE BAYS, TO KEEP CD ROM IN HORIZONTAL IN RACKMOUNT USE.

5. YY-W201 Server Chassis, Pedestal & 5U rackmount versatile
*USBx4 Front Access
Snap in Front Bezel, could be fixed and locked after system installed
Optional fixed HDD cage for 5-devices
Open side panel with handle
The vented panel should be retained as an air inlet for core area cooling
Easy swap fan to HDD cage
Slide in rails for drives install

6. YY-W201 Server Chassis, Pedestal & 5U rackmount versatile
Power Supply could be Single ATX/EPS12V, or Redundant Power Supply
Excellent Air Flow for hard drives and core areas
Optional 6cmx2 cooling fans for AGP/PCI cards
Optional Card Clamp holder for fixing Add on cards
Adjustable holder for various length, height of Add on cards
Optional Intrusion switch

7. Flexible combination driver bay
Type A: 8*5.25”drive bays
Free to build your own raid module or HDD enclosures
Type B: 5*5.25”+5*3.5”HDD drive bays
HDD frame for 5-devices HDD, with anti-vibration soft mounting kits and 9cm cooling fan
Type C: 2*3 1”H hot swap module in 4x5.25” device
2 x 3-devices hot swappable HDD raid module, for IDE ATA66.100/133, SCA Ultra160/320 or SATA HDD

8. Flexible Combination Driver Bay
YY-W201 with Raid module
Hot-Swappable solution for SATA (Serial ATA), SCA2 ULTRA320, and IDE ATA133 HDD
Specifications:
Material: Aluminum
Interface:
SI-0237SS, SI-0347SS, SI-0357SSSerial ATA
SI-0237C, SI-0357CSCA2 Ultra320
SI-0237A, SI-0347A, SI-0357AATA66/100/133
Hot-Swap: Level 4 (Bus may have active I/O processes on going, but device being inserted or removed must be idle)
SAF-TE: HDD fail detect function optional (SI-0375CS w/SAF-TE)
Alarm System: Buzzer beeping in case of fan error. (stop, disconnect, speed slow down)
Feature: Front Led display: HDD full, power access, SCSI ID.
SI-0237
SI-0347
SI-0357

9. Multiple Chassis; rackmount (5U) & Pedestal
Control Panel:
Power Failure LED
LAN LED x2
HDD LED
Power on LED
Reset Switch
Power Switch
427mm
600mm
Dust Filter behind Front bezel
220mm
EEB 3.5 compliance
CEB 1.1 compliance
Compact & Scaleable
Hard Tooling Production

10. How to make it as rackmount :
EIA-310D compliance
EEB 3.5 compliance , refer to
Telescopic slides (24”) is optional
2. Screw in rack bracket and handles
1. To remove top cover and bottom cover of chassis
3. Slide in to EIA rack

11. http://www. intel. com/support/motherboards/server/shg2/chassis_list