1. Technician Licensing Class
Electrical components, semiconductors, circuit diagrams, component functions
T6A - T6D
Valid July 1, 2014 Through June 30, 2018
Developed by Bob Bytheway, K3DIO, and slightly modified by SPARC 1

2. T 6 A
The electrical component used to oppose the flow of current in a DC circuit is the resistor. T6A01
The component often used as an adjustable volume control is the potentiometer. T6A02
The electrical parameter controlled by a potentiometer is resistance. T6A03 2

3. T 6 A
The electrical component that stores energy in an electric field is the capacitor. T6A04
The type of electrical component that consists of two or more conductive surfaces separated by an insulator is a capacitor. T6A05

4. T 6 A
The electrical component that stores energy in a magnetic field is an inductor. T6A06
The electrical component usually composed of a coil of wire is an inductor. T6A07
The electrical component used to connect or disconnect electrical circuits is the switch. T6A08
The electrical component used to protect other circuit components from current overload is the fuse. T6A09 4

5. T 6 A These battery types are rechargeable: Nickel-metal hydride;
Lithium-ion;
Lead-acid gel-cell
All of these choices are correct. T6A10
This type of battery is not rechargeable: Carbon-zinc. T6A11 5

6. T 6 B
The class of electronic components that are capable of using a voltage or current signals to control current flow are transistors. T6B01
The electronic component that allows current to flow in only one direction is the diode. T6B02
The component that can be used as an electronic switch or amplifier is the transistor. T6B03 6

7. T 6 B
The component made from three layers of semiconductor material is the transistor. T6B04
The transistor is an electronic component that can amplify signals. T6B05
The cathode lead of a semiconductor diode is usually identified with a stripe. T6B06 7

8. T 6 B
The abbreviation LED stands for Light Emitting Diode. T6B07 8

9. T 6 B
The abbreviation FET stands for field effect transistor. T6B08

10. T 6 B The two electrodes of a diode are the Anode and Cathode. T6B09
The three electrodes of a PNP or NPN transistor are emitter, base, and collector. T6B10
The three electrodes of a field effect transistor are source, gate, and drain. T6B11
The term that describes a transistor’s ability to amplify a signal is gain. T6B12 10

11. T 6 C
The name for standardize representations of components in an electrical wiring diagram is Schematic Symbols. T6C01
Component #1 in Figure T1 is a Resistor. T6C02
Component #2 in Figure T1 is a Transistor. T6C03
Figure T1 11

12. T 6 C Component #3 in Figure T1 is a Lamp. T6C04
Component #4 in Figure T1 is a Battery. T6C05
Figure T1 12

13. T 6 C Component #6 in Figure T2 is a capacitor. T6C06
Component #8 in Figure T2 is a light emitting diode. T6C07
Component #9 in Figure T2 is a variable resistor. T6C08
Figure T2 13

14. T 6 C
Component #4 in Figure T2 is a transformer. T6C09
Figure T2 14

15. T 6 C The component #3 in figure T3 is a variable inductor. T6C10
The component #4 in figure T3 is an antenna. T6C11
Figure T3 15

16. T 6 C
The symbols on an electrical circuit schematic diagram represent electrical components. T6C12
The way components are interconnected is accurately represented in electrical circuit schematic diagrams. T6C13 16

17. T 6 D
The device or circuit that changes an alternating current in to a varying direct current signal is the rectifier. T6D01
A switch controlled by an electromagnet describes a relay. T6D02
Component #3 in Figure T2 is a single-pole, single-throw switch. T6D03
Figure T2 17

18. A meter can be used to display
T 6 D
A meter can be used to display
signal strength on a numeric scale . T6D04
A regulator is a type of circuit that
controls the amount of voltage
from a power supply. T6D05
The component commonly used to
change 120V AC house current to
a lower AC voltage for other uses
is a transformer. T6D06 18

19. T 6 D A device commonly used as a visual indicator is an LED. T6D07
A capacitor is used together with an inductor to make a tuned circuit. T6D08
The name of a device that combines several semiconductors and other components into one package is integrated circuits. T6D09 19

20. T 6 D The name of a device that combines
several semiconductors and other
components into one package is
integrated circuits. T6D09
The function of component
#2 in Figure T1 is to control
the flow of current. T6D10
Figure T1 20

21. T 6 D
A simple resonant or tuned circuit consists of an inductor and a capacitor connected in series or parallel to form a filter. T6D11
A common reason to use shielded wire is to prevent coupling of unwanted signals to or from the wire. T6D12 21

22. Element 2 Technician Class Question Pool
T 6 A – T 6 D
Valid July 1, 2014
Through
June 30, 2018 22

23. T6A01. What electrical component is used to oppose the
T6A01 What electrical component is used to oppose the flow of current in a DC circuit?
Inductor
Resistor
Voltmeter
Transformer 23

24. T6A02. What type of component is often used as an
T6A02 What type of component is often used as an adjustable volume control?
Fixed resistor
Power resistor
Potentiometer
transformer 24

25. T6A03 What electrical parameter is controlled by a potentiometer?
Inductance
Resistance
Capacitance
Field strength 25

26. T6A04 What electrical component stores energy in an electric field?
Resistor
Capacitor
Inductor
Diode 26

27. T6A05. What type of electrical component consists of two
T6A05 What type of electrical component consists of two or more conductive surfaces separated by an insulator?
Resistor
Potentiometer
Oscillator
Capacitor 27

28. T6A06. What type of electrical component stores energy
T6A06 What type of electrical component stores energy in a magnetic field?
Resistor
Capacitor
Inductor
Diode 28

29. T6A07 What electrical component is usually composed of a coil of wire?
Switch
Capacitor
Diode
Inductor 29

30. T6A08. What electrical component is used to
T6A08 What electrical component is used to connect or disconnect electrical circuits?
Magnetron
Switch
Thermistor
All of these choices are correct 30

31. T6A09. What electrical component is used to protect
T6A09 What electrical component is used to protect other circuit components from current overloads?
Fuse
Capacitor
Inductor
All of these choices are correct 31

32. T6A10 Which of the following battery types is rechargeable?
Nickel-metal hydride
Lithium-ion
Lead-acid gel-cell
All of these choices are correct 32

33. T6A11 Which of the following battery types is not rechargeable?
Nickel-cadmium
Carbon-zinc
Lead-acid
Lithium-ion 33

34. T6B01. What class of electronic components is capable
T6B01 What class of electronic components is capable of using a voltage or current signal to control current flow?
Capacitors
Inductors
Resistors
Transistors 34

35. T6B02. What electronic component allows current to
T6B02 What electronic component allows current to flow in only one direction?
Resistor
Fuse
Diode
Driven element 35

36. T6B03. Which of these components can be used as an
T6B03 Which of these components can be used as an electronic switch or amplifier?
Oscillator
Potentiometer
Transistor
Voltmeter 36

37. T6B04. Which of the following components can be made
T6B04 Which of the following components can be made of three layers of semiconductor material?
Alternator
Transistor
Triode
Pentagrid converter 37

38. T6B05. Which of the following electronic components
T6B05 Which of the following electronic components can amplify signals?
Transistor
Variable resistor
Electrolytic capacitor
Multi-cell battery 38

39. T6B06 How is cathode lead of a semiconductor diode usually identified?
With the word cathode
With a stripe
With the letter C
All of these choices are correct 39

40. T6B07 What does the abbreviation "LED" stand for?
Low Emission Diode
Light Emitting Diode
Liquid Emission Detector
Long Echo Delay 40

41. T6B08 What does the abbreviation FET stand for?
Field Effect Transistor
Fast Electron Transistor
Free Electron Transition
Field Emission Thickness 41

42. T6B09 What are the names of the two electrodes of a diode?
Plus and minus
Source and drain
Anode and cathode
Gate and base 42

43. T6B10 What are the three electrodes of a PNP or NPN transistor?
Emitter, base, and collector
Source, gate, and drain
Cathode, grid, and plate
Cathode, drift cavity, and collector 43

44. T6B11 What at are the three electrodes of a field effect transistor?
Emitter, base, and collector
Source, gate, and drain
Cathode, grid, and plate
Cathode, gate, and anode 44

45. T6B12. What is the term that describes a
T6B12 What is the term that describes a transistor's ability to amplify a signal?
Gain
Forward resistance
Forward voltage drop
On resistance 45

46. T6C01. What is the name for standardized representations
T6C01 What is the name for standardized representations of components in an electrical wiring diagram?
Electrical depictions
Grey sketch
Schematic symbols
Component callouts 46

47. T6C02 What is component 1 in figure T1?
Resistor
Transistor
Battery
connector 47

48. T6C03 What is component 2 in figure T1?
Resistor
Transistor
Indicator lamp
Connector 48

49. T6C04 What is component 3 in figure T1?
Resistor
Transistor
Lamp
Ground symbol 49

50. T6C05 What is component 4 in figure T1?
Resistor
Transistor
Battery
Ground symbol 50

51. T6C06 What is component 6 in figure T2?
Resistor
Capacitor
Regulator IC
Transistor 51

52. T6C07 What is component 8 in figure T2?
Resistor
Inductor
Regulator IC
Light emitting diode 52

53. T6C08 What is component 9 in figure T2?
Variable capacitor
Variable inductor
Variable resistor
Variable transformer 53

54. T6C09 What is component 4 in figure T2?
Variable inductor
Double-pole switch
Potentiometer
Transformer 54

55. T6C10 What is component 3 in figure T3?
Connector
Meter
Variable capacitor
Variable inductor 55

56. T6C11 What is component 4 in figure T3?
Antenna
Transmitter
Dummy load
Ground 56

57. T6C12. What do the symbols on an electrical circuit
T6C12 What do the symbols on an electrical circuit schematic diagram represent?
Electrical components
Logic states
Digital codes
Traffic nodes 57

58. T6C13. Which of the following is accurately represented
T6C13 Which of the following is accurately represented in electrical circuit schematic diagrams?
Wire lengths
Physical appearance of components
The way components are interconnected
All of these choices 58

59. T6D01. Which of the following devices or circuits
T6D01 Which of the following devices or circuits changes an alternating current into a varying direct current signal?
Transformer
Rectifier
Amplifier
Reflector 59

60. T6D02 What best describes a relay?
A switch controlled by an electromagnet
A current controlled amplifier
An optical sensor
A pass transistor 60

61. T6D03 What type of switch is represented by item 3 in figure T2?
Single-pole single-throw
Single-pole double-throw
Double-pole single-throw
Double-pole double-throw 61

62. T6D04. Which of the following can be used to display
T6D04 Which of the following can be used to display signal strength on a numeric scale?
Potentiometer
Transistor
Meter
Relay 62

63. T6D05. What type of circuit controls the amount of
T6D05 What type of circuit controls the amount of voltage from a power supply?
Regulator
Oscillator
Filter
Phase inverter 63

64. T6D06. What component is commonly used to change
T6D06 What component is commonly used to change 120V AC house current to a lower AC voltage for other uses?
Variable capacitor
Transformer
Transistor
Diode 64

65. T6D07 Which of the following is commonly used as a visual indicator?
LED
FET
Zener diode
Bipolar transistor 65

66. T6D08. Which of the following is used together with an
T6D08 Which of the following is used together with an inductor to make a tuned circuit?
Resistor
Zener diode
Potentiometer
Capacitor 66

67. T6D09. What is the name of a device that combines
T6D09 What is the name of a device that combines several semiconductors and other components into one package?
Transducer
Multi-pole relay
Integrated circuit
Transformer 67

68. T6D10 What is the function of component 2 in Figure T1?
Give off light when current flows through it
Supply electrical energy
Control the flow of current
Convert electrical energy into radio waves 68

69. T6D11 What is a simple resonant or tuned circuit?
An inductor and a capacitor connected in series or parallel to form a filter
A type of voltage regulator
A resistor circuit used for reducing standing wave ratio
A circuit designed to provide high fidelity audio 69

70. T6D12 Which of the following is a common reason to use shielded wire?
To decrease the resistance of DC power connections
To increase the current carrying capability of the wire
To prevent coupling of unwanted signals to or from the wire
To couple the wire to other signals 70