1. KC705, TSW14J10EVM & ADC34J44EVM

2. Setup Instructions
Copy the file called ADC34J44_LMF_4421.ini to the following location:
C:\Program Files(86)\Texas Instruments\High Speed Data Converter Pro\14J10KC705 Details\ADC Files
Copy the file called ADC3xJxx_125MSPS_KC705.cfg to the following location:
C:\Program Files(86)\Texas Instruments\ADC3xxxx\Configuration Files
Open the ADC3000 GUI and load the new config file mentioned above.
Open HSDC Pro, and select the new ini file mentioned above. The ini will use existing firmware.
Set the sample rate to 125MHz and do a capture. The memory size is limited on the KC705, so do not increase the FFT size to anything higher than 65,536 samples

3. 70MHz IF @ 125MHz sample rate, CH1