1. Physical Computing: Glove controller for Unity
Amos yeo
Kenneth koh

2. Project outcomes
Our project will create a virtual environment in Unity which is able to accept and translate serial inputs into commands and instructions received from a glove and control pad.
The control pad consists of a joystick module that would allow the directional control of a character in the virtual environment.
The glove has 3 inputs using force sensors that when activated would cause the character to jump, slide or run. A light dependent resistor in the control pad to control the time of day, however there was some problem is making the light change to be gradual. And therefore could not be fixed on time.

3. Hardware 2x Arduino Uno 2x Metal Box 1x Glove 3x Force Sensor 1x LDR
1x Joystick module
1x Vibration motor
2x Bluetooth module

4. Inputs and Outputs Inputs: Force sensors for manipulation of character
Joystick for directional control of character
Light dependent resistor for controlling the time of day
Outputs:
Vibration motor for haptic feedback
Monitor Display, character movement and actions (Unity)

5. Notable objects in environment
Unity-Chan
Dinosaurs
Trampoline
Physics Boxes

6. Glove Controller Box