1. DeltaV™ Engineering Tutorial
This tutorial will demonstrate how to open an experiment, make configuration changes and download.

2. DeltaV Engineering Open the DeltaV Explorer Go to the Start >
All Programs >
DeltaV >
Engineering >
DeltaV Explorer >

4. DeltaV Engineering
The DeltaV Explorer is the main utility used to initiate changes to the control algorithms and physical hardware.
In our case we will be using the Explorer to open each experiment with the “Control Studio”. Our experiments are under “AREA_A”
Example: Open LAB1, Right click:

7. DeltaV configuration is “Object Oriented”, similar to Simulink.
The toolbar on the right side is the pallet of control functions or objects
Select the object of interest by left click
The list in the lower right details all the parameters for each object.
Example LT1-1 has a X_SCALE or field scale of 0 to 20 inH2O (68 DegF)

8. Make sure all the categories are checked.

9. If you want to know what the object is, right click and
Select What’s this?
You will the be able to gain access to the Help Files.

10. Click Reference to get help files

11. PID Help file for that block is available for your inspection

12. In this lab, we will be doing software wiring or connecting objects
To wire, left click on the object’s connection terminal and drag the wire to the other terminal

13. Wire Here

14. Delete the wire from FT1-1 to FC1-1 IN.
Locate and drag Filter block, under the Analog Control tab, from the pallet
to the workspace.

15. Once the change is made, we need to “Download”, but save first then Download

16. Save then Download

17. Select Download Now
The “Upload” allows one to transfer setting changed in the operate mode
to the control studio configuration.
Next it will ask you if this is what you want to do for sure,
Keep on saying Yes …

18. Say Yes

19. Dunkin is now doing his thing and we are downloading, click OK here

20. Congratulations! You have finished Downloading!

21. Click here to display live data

22. Live data display
Click here to close