1. Ad-hoc Transportation test of «CLIC module»
M. Aicheler

2. Those two girders to be transported into storage area in Building 162
=> ad-hoc Transportation-Test

3. AS simple mockup
Plain material, no inner geometry
Brazed (for material state compareable to CLIC AS) and very cheap to manufacture
Core diametre 80mm
Manifolds 40mm x 40mm
Roughly same weight and similar mechanical properties
Will be reused for tests with new supports!

4. MB Girder AS
Vibration logger
Fiducial
Clamping of AS to girder as in CDR/CLEX

5. Steps:
Installation, clamping, on site-fiducialisitation, installation of vibration logger in Build 18
Transport by manual crane onto palette
Transport of pallet with manual lifter
Transport of pallet with truck
Transport of pallet with hall crane to final position
Final on site (build 162) survey and evaluation of vibration logger
If we want, we can make an intermediate survey at any point with the laser tracker (e.g. after transport with truck)
Overall time estimation for test (including fiducialisation and final survey): 2 days

6. Targeted outcome: Open questions:
Evaluate the loss in position precision during a transportation test with the CDR design of support and clamping
Assess the typical spectrum of vibration/shock exposure of a CLIC girder during various transportation steps for future support design
Open questions:
Transport in a box?
Clamping details
Details on manufacturing of simple AS mockup