1. Linux/UNIX Programming
APUE (Signals)
문양세
강원대학교 IT대학 컴퓨터과학전공

2. Signals Process Signal #8
APUE (Signals)
Signals are software interrupts from unexpected events
an illegal operation (e.g., divide by 0)
a power failure
an alarm clock
the death of a child process
a termination request from a user (Ctrl-C)
a suspend request from a user (Ctrl-Z)
Process
Signal #8

3. Predefined Signals (1/2)
APUE (Signals)
31 (default) signals
/usr/include/signal.h (/usr/include/sys/iso/signal_iso.h, /usr/include/bits/signum.h)
Every signal has a name
begin with ‘SIG’
SIGABRT: abort signal from abort()
SIGALRM: alarm signal from alarm()
Actions of the default signal handler
terminate the process and generate a core(dump)
ignores and discards the signal(ignore)
suspends the process (suspend)
resume the process

4. Predefined Signals (2/2)
APUE (Signals)
Ex1) /usr/include/sys/iso/signal_iso.h

5. Predefined Signals (2/2)
APUE (Signals)
Ex2) /usr/include/bits/signum.h

6. Signal Generation Terminal-generated signals
APUE (Signals)
Terminal-generated signals
CTRL-C  SIGINT
CTRL-Z  SIGSTP signal
Hardware excepts generate signals
divide by 0  SIGFPE
invalid memory reference  SIGSEGV
kill()
sends any signal to a process or process group
need to be owner or super-user
Software conditions
SIGALRM: alarm clock expires
SIGPIPE: broken pipe
SIGURG: out-of-band network data

7. Handling of Signals
APUE (Signals)
Disposition or action: Process has to tell the kernel “if and when this signal occurs, do the following.”
Ignore the signal: all signals can be ignored, except SIGKILL and SIGSTOP
Catch the signal: Call a function of ours when a signal occurs.
Let the default action apply: most are to terminate process

8. List of Signals (1/2)
APUE (Signals)

9. List of Signals (2/2)
APUE (Signals)

10. Representative Signals (1/2)
APUE (Signals)
SIGART : generated by calling the abort function.
SIGALRM : generated when a timer set with the alarm expires.
SIGCHLD : whenever a process terminates or stops, the signal is sent to the parent.
SIGCONT : this signal sent to a stopped process when it is continued.
SIGFPE : signals an arithmetic exception, such as divide-by-0, floating point overflow, and so on
SIGILL : indicates that the process has executed an illegal hardware instruction.
SIGINT : generated by the terminal driver when we type the interrupt key and sent to all processes in the foreground process group.

11. Representative Signals (2/2)
APUE (Signals)
SIGKILL : can’t be caught or ignored. a sure way to kill any process.
SIGPIPE : if we write to a pipeline but the reader has terminated, SIGPIPE is generated.
SIGSEGV : indicates that the process has made an invalid memory reference. ( core dumped)
SIGTERM : the termination signal sent by the kill(1) command by default.
SIGSTP : Cntl-Z from the terminal driver which is sent to all processes in the foreground process group.
SIGUSR1 : user defined signal 1
SIGUSR2 : user defined signal 2

12. signal() Signal Handler 등록 signal(int signo, void(*func)()))
APUE (Signals)
Signal Handler 등록
signal(int signo, void(*func)()))
specify the action for a signal (signo  func)
func
SIG_IGN (ignore)
SIG_DFL (default)
user-defined function
Return: the previous func

13. 예제: alarm1.c (w/o handler)
APUE (Signals)
#include <stdio.h> // alarm1.c
main( ) {
alarm(3);
printf(“Looping forever …\n”);
while (1);
printf(“This line should never be executed\n”); }

14. 예제: alarm2.c (w/ handler) (1/2)
APUE (Signals)
#include <stdio.h> // alarm2.c
#include <signal.h>
int alarmFlag=0;
void alarmHandler();
main( ) {
signal(SIGALRM, alarmHandler);
alarm(3);
printf("Looping …\n");
while(!alarmFlag) {
pause( ); }
printf("Loop ends due to alarm signal \n");
void alarmHandler( ) {
printf("An alarm clock signal was received\n");
alarmFlag = 1;

15. 예제: alarm2.c (w/ handler) (2/2)
APUE (Signals)
실행 결과

16. 예제: sigint.c (1/2)
APUE (Signals)

17. 예제: sigint.c (2/2)
APUE (Signals)

18. SIGCHLD
APUE (Signals)
Whenever a process terminates or stops, the signal is sent to the parent.
자식 프로세스는 자신이 죽을 때, 부모 프로세스에게 SIGCHLD를 보낸다.

19. 예제: timelimit.c (1/3)
APUE (Signals)
$ timelimit N command // command를 N seconds안에 수행하라!

20. 예제: timelimit.c (2/3)
APUE (Signals)

21. 예제: timelimit.c (3/3)
APUE (Signals)

22. kill() & raise() (1/4)
APUE (Signals)
#include <sys/types.h>
#include <signal.h>
int kill(pid_t pid, int signo);
int raise(int signo);
Both return: 0 if OK, 1 on error
kill - sends a signal to a process or a group of processes
raise - function allows a process to send a signal to itself

23. kill() & raise() (2/4) pid means Permission to send signals
APUE (Signals)
pid means
pid > 0 : signal to the process whose process ID is pid
pid == 0 : signal to the processes whose process group ID equals that of sender
pid < 0 : signal to the processes whose process group ID equals abs. of pid
pid == -1 : unspecified (used as a broadcast signal in SVR4, BSD)
Permission to send signals
The super-user can send a signal to any process.
The real or effective user ID of the sender has to equal the real or effective user ID of the receiver.

24. kill() & raise() (3/4)
APUE (Signals)

25. kill() & raise() (4/4)
APUE (Signals)

26. alarm() alarm() sets a timer to expire at a specified time in future.
APUE (Signals)
#include <unistd.h>
unsigned int alarm (unsigned int seconds);
Returns: 0 or number of seconds until previously set alarm
alarm() sets a timer to expire at a specified time in future.
when timer expires, SIGALRM signal is generated,
default action of the signal is to terminate the process.
Only one alarm clock per process
previously registered alarm clock is replaced by the new value.
if alarm(0), a previous unexpired alarm is cancelled.

27. pause() suspends the calling process until a signal is caught.
APUE (Signals)
#include <unistd.h>
int pause (void);
Returns: -1 with errno set to EINTR
suspends the calling process until a signal is caught.
returns only if a signal handler is executed and that handler returns.
그냥 종료하던지 (signal handler가 등록되지 않은 경우),
signal handler가 등록된 경우 해당 handler가 처리를 마친 후 리턴한다.

28. 예제: mysleep.c (1/2) 상기 mysleep() 함수는 다음과 같은 몇 가지 문제점을 안고 있다.
APUE (Signals)
#include <signal.h> // mysleep.c
#include <unistd.h>
static void sig_alrm(int signo) {
return; /* nothing to do, just return to wake up the pause */ }
unsigned int mysleep(unsigned int nsecs) {
if (signal(SIGALRM, sig_alrm) == SIG_ERR) return nsecs;
alarm(nsecs); /* start the timer */
pause(); /* next caught signal wakes us up */
return alarm(0); /* turn off timer, return unslept time */
상기 mysleep() 함수는 다음과 같은 몇 가지 문제점을 안고 있다.
만일 mysleep()을 사용하기 이전에 alarm을 set한 경우, 앞서의 alarm이 지워진다.
Race condition이 발생할 수 있다(즉, pause()가 호출되기 전에 alarm이 발생할 수 있다.).
상기 문제 해결을 위해서는 보다 견고한 mysleep()의 구현이 필요하다.

29. 예제: mysleep.c (2/2)
APUE (Signals)

30. abort() (1/2) Causes abnormal program termination.
APUE (Signals)
#include <stdlib.h>
void abort(void);
This function never returns
Causes abnormal program termination.
This function sends the SIGABRT signal to the process.
SIGABRT signal handler to perform any cleanup that it wants to do, before the process terminated.

31. abort() (2/2)
APUE (Signals)

32. sleep()
APUE (Signals)
#include <signal.h>
unsigned int sleep(unsigned int seconds) ;
Returns: 0 or number of unslept seconds
This function causes the calling process to be suspended until either
The amount of wall clock time specified by second has elapsed (returns 0)
A signal is caught by the process and the signal handler returns (returns the number of unslept seconds)

33. newsleep.c
APUE (Signals)

34. Homework#11