1. LUCID Mechanical support and cooling proposal Status of the current design development Erik Richards, Raphael Vuillermet December 10th 2013

2. Connector shell made of bluestone SLA with mounting points built in
PM assembly
Connector shell made of bluestone SLA with mounting points built in
Mu metal cylinder
SMA adaptor made of bluestone with mounting point built in
12/10/2013
Erik Richards

3. PM assembly
Photomultiplier
SMA connector
12/10/2013
Erik Richards

4. PM assembly
12/10/2013
Erik Richards

5. Spot welded to the support cylinder Copper cooling pipe
Under thermal calculation to validate the cooling lines dimensioning
Cooler assembly
Aluminum Support
Spot welded to the support cylinder
Copper cooling pipe
Aluminum support tube
12/10/2013
Erik Richards

6. Removing or installing PM
Loosen assembly screws and slide PM back
Purpose :
Fast removal
Avoid to loose small bolts
12/10/2013
Erik Richards

7. Lucid support cylinder
Cable trays
Sliding supports
12/10/2013
Erik Richards

8. Services support Lucid services Beam pipes services
The purpose is to create a Patch panel for a fast disconnection (ALARA)
12/10/2013
Erik Richards

9. Beam pipe & Lucid services
Create solid cable trays to define clear volume. of installation. The purpose is to minimize the risk conflict during installation/removal of the package (ALARA)
12/10/2013
Erik Richards

10. Services from LUCID and beam-pipe
Services support
Big Wheels
Plug
Services from LUCID and beam-pipe
JFC1
12/10/2013
Erik Richards

11. Services support structure
Patch panel
Services support structure
12/10/2013
Erik Richards

12. Services support
12/10/2013
Erik Richards

13. Articulated support structure
Services support
Articulated support structure
Fixed support structure
The purpose of the support structure is to avoid the Big Wheel during installation/removal of “VJ package”
12/10/2013
Erik Richards

14. Automatic gravity hook Existing lifting beam modified
Lifting tool
Automatic gravity hook
Existing lifting beam modified
Alignment system
Purpose of this new lifting beam :
- Remote handling by the crane operator to avoid any human intervention
12/10/2013
Erik Richards

15. This will not be possible anymore !
12/10/2013
Erik Richards

16. Lifting tool
12/10/2013
Erik Richards

17. Lifting tool Check potential conflict with services support structure
12/10/2013
Erik Richards

18. Lifting tool
12/10/2013
Erik Richards

19. schedule Oct-13 Nov-13 Dec-13 Jan-14 Feb-14 Mar-14 Apr-14 May-14
Jun-14
Jul-14
Design
Order
Assembly
Test
12/10/2013
Erik Richards

20. Conclusions Conceptual design is finished Design work :
Finalise the patch panel design (LUCID + Beam Pipe)
Finalise the service routing around the carbon fiber pipe
Finalise the design (optimisation for production)
Prepare production drawings
Simulation :
Cooling circuit is under dimensioning check
12/10/2013
Erik Richards