1. Date of download: 12/31/2017
Copyright © ASME. All rights reserved.
From: Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
J. Manuf. Sci. Eng. 2008;130(3): doi: /
Figure Legend:
Working principle of a molten metal DoD inkjet system

2. Date of download: 12/31/2017
Copyright © ASME. All rights reserved.
From: Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
J. Manuf. Sci. Eng. 2008;130(3): doi: /
Figure Legend:
Conceptual view of the gap adjustable molten metal DoD inkjet head with cone-shaped piston

3. Date of download: 12/31/2017
Copyright © ASME. All rights reserved.
From: Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
J. Manuf. Sci. Eng. 2008;130(3): doi: /
Figure Legend:
3D model for the gap adjustable molten metal DoD inkjet system with cone-shaped piston head

4. Date of download: 12/31/2017
Copyright © ASME. All rights reserved.
From: Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
J. Manuf. Sci. Eng. 2008;130(3): doi: /
Figure Legend:
Measured viscosity of the molten metal versus shear rates

5. Date of download: 12/31/2017
Copyright © ASME. All rights reserved.
From: Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
J. Manuf. Sci. Eng. 2008;130(3): doi: /
Figure Legend:
Captured trajectory of the ejected pure water droplets (droplet diameter 170μm)

6. Date of download: 12/31/2017
Copyright © ASME. All rights reserved.
From: Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
J. Manuf. Sci. Eng. 2008;130(3): doi: /
Figure Legend:
Captured trajectory of the ejected molten metal droplets (droplet diameter 290μm)

7. Date of download: 12/31/2017
Copyright © ASME. All rights reserved.
From: Gap Adjustable Molten Metal DoD Inkjet System With Cone-Shaped Piston Head
J. Manuf. Sci. Eng. 2008;130(3): doi: /
Figure Legend:
Block diagram of the operation step for the gap adjustable molten metal DoD inkjet system