Presentation is loading. Please wait.

Presentation is loading. Please wait.

WDR-based Bandpass Filters

Similar presentations


Presentation on theme: "WDR-based Bandpass Filters"— Presentation transcript:

1 WDR-based Bandpass Filters
And An Intelligent System For Their Optimal Design Alexander G. Yushchenko

2 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
WDR Filter Geometry With Working H101-mode Cross-shaped cut-off waveguide Dielectric plates with working H101-mode Input rectangular waveguide of the main tract

3 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
WDR Filter Geometry With Working LM101-mode Cross-shaped cut-off waveguide Dielectric plates with working LM101-mode Input rectangular waveguide of the main tract

4 Logical structure of the CAD system
WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design Logical structure of the CAD system Data operations Knowledge operations User hmodes.dll lmmodes.dll Expert system Data exchange

5 Intelligent CAD System Interface
WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design Intelligent CAD System Interface

6 The sequence of evolutionary multi-tier filters design
WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design The sequence of evolutionary multi-tier filters design

7 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
Frequency responses of the filters (f = 73.5 GHz, δf = 6.8 %) designed with the KB CAD system in three- and five- and seven tier variants: extra-band attenuations

8 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
Frequency responses of the filters (f = 83.5 GHz, δf = 6 %) designed with the KB CAD system in three- and five- and seven- tier variants: of extra-band attenuations

9 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
Comparative Characteristics of Bandpass Filters Based on WDR and Microstrip Resonators Bandwidths of the filters based on WDR and the 70-GHz Millimeter-Wave Compact Bandpass Filter Responses of the Filters based on WDR and Microstrip Band pass filter for the WiMAX application at the frequency 3.2 GHz

10 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
Comparative Characteristics of Bandpass Filters Based on WDR and Microstrip Resonators Responses of the filters based on WDR and of High- Temperature Superconducting (HTS) Microstrip (at 70 K)

11 WDR Filters parameters for 73,5 and 83,5 GHz
WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design WDR Filters parameters for 73,5 and 83,5 GHz Filter Settings Seven-tier Filter Central frequency, GHz 73.5 83.5 Bandwidth, % 6.8 6.0 Regular waveguide width, mm 3.6 Cutoff waveguide width, mm 1.385 1.241 Waveguides height, mm 1.8 l0, мм 0.27 0.3 lс, mm 0.3863 0.3033 l2, mm l3, mm 0.387 0.302 l4, mm 0.345 0.277 l23, mm 1.446 1.407 l34, mm 1.419 1.379 Filter length, mm 11.300 10.689 ε, leucosapphire 9.2

12 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
Conclusions Thus, we have proved and confirmed by numerical experiments the efficiency of the evolutionary strategy to step by step designing of seven-tier WDR filters using the original KB CAD system. Corresponding to the strategy the designing of highest level filters based on the results of lower layer designs optimization, which contain the lower number of tiers and , therefore, essentially easier to optimize. The efficiency of the proposed strategy shows the results of the optimization of telecommunication filters that correspond to the latest standards like IEEE c and IEEE ad. A comparative analysis of three-five and seven -tier filter properties and described designs of the letter, which have been provided. It seems that through the optimization with the system, we can obtain high-quality filter designs, which are fairly manufacturable as well. As a whole the successful solution of the task of developing of the knowledge based CAD system for optimization of the seven -tiers filters makes the pillar for developing of the optimization system of the nine-tier structure. Since KB CAD system is based on a deep understanding of the dynamics of the frequency of coupled resonators, which in many ways is similar to the resonators of different classes with the evanescent modes, we can expect the possibility of its modification for the multi-tier filters of other designs.

13 WDR-based Bandpass Filters And An Intelligent System For Their Optimal Design
Researchgate page:


Download ppt "WDR-based Bandpass Filters"

Similar presentations


Ads by Google