1. MICROSENS GmbH & Co. KG Kueferstr. 16 59067 Hamm / Germany
Optical Networks
xWDM Platform
MSP 1000
MICROSENS GmbH & Co. KG Kueferstr. 16
59067 Hamm / Germany V

2. Chassis User Transponder User Transponder Dark User Fiber NMS PS
MSP 1400 setup
Chassis
Fans PS
User
SFP
Transponder
User
Mux
XFP
Transponder
User
Dark
Fiber
De-
Mux
NMP
SNMP
Browser
NMS
Filter
AC / DC

3. MICROSENS WDM MSP - Platform
Both chassis can be connected in many ways and use one common network management system (nmp). The same transponders and filters are used in both platform types. Each platform type can be used for CWDM & DWDM up to 10 Gbit/s per channel.

4. 19“ Chassis MSP 1100
1 RU high, 19“ wide
2 slots for active cards
Redundant fans
Redundant Power Supply input 48V DC, external supplies for 230V AC
Managed with MICROSENS nmp

5. 19“ Chassis MSP 1400
4 RU high, 19“ wide
3 managed, field replaceable fans on the rear side
10 slots for active (and/or passive) cards
Power Supplies 2x 230V AC, 2x 48V DC or 230V AC+ 48V DC
Managed with MICROSENS nmp

6. Each Chassis MUST have a NMS Module
MSP 1100, MSP 1400
Each Chassis MUST have a NMS Module
A Chassis can have 1 PS (no redundancy) or 2 PS (fully redundant)
Free airflow must be guaranteed: MSP 1100: from left to right MSP 1400: from front to back
Passive modules (filters, etc.) can also be built in separate passive Chassis (1RU, 3 slots).

7. NM3 module Web Manager (HTTP/HTTPS)
Command Line Interface via Telnet/SSH/Console
SNMP v1/v2c/v3 with View-based Access Control Model (VACM) and User-based Security Model (USM)
Linux operating system
Users can be authenticated by the central TACACS+ server and user access may be restricted via Access Control List (ACL)
User authentication according to IEEE 802.1X

8. Transponder Modules front view
MICROSENS
Module Name
Module Description
SFP Slots
Port LEDs

9. Transponder Modules up to 4 Gbps
X2G
2 Channels 2 Wavelengths 3R: 100 Mbps – 2,67 Gbps Cross-Connect A/B, A/B/C switch Backup
4x SFP MM/SM 850nm, 1300nm 100BaseT, 1000BaseT CWDM, DWDM
M2G
TDM function 2 Channels input 1 Wavelength output FC-1G, GbE Backup
4x SFP MM/SM 850nm, 1300nm BaseT CWDM, DWDM
T4G
2 Channels 2 Wavelengths 3R: FC-1G/-2G/-4G, GbE

10. M2G TDM for 2 Gigabit interfaces Input 1,0625 / 1,25 Gbps
One card type for all port combinations
Link speed fixed at 2,55 Gbps
All interfaces standard SFP
Synchronisation channel includes Remote Inband Management
Built-in basic Performance Monitoring
Automatic Link-Backup enabled through SW-Key (Backup-Key)
Always „Point-to-Point“
NEW: E1/T1 Copper SFPs for P2P over GbE connection

11. TXG / CXG CXG: Single channel converter for 8G/10G, no 3R
TXG: Single channel converter for 10 Gbps with 3R
Both interfaces use XFP
3R on both ports with TXG
All standard 10G speeds per can be selected by SW parameter: Ethernet, SDH/SONET, Fibre Channel (TXG)
Supports tunable DWDM-XFP

12. NEW: CXG+ 4 SFP+ interfaces „Any“ speed up to 16 Gbps
Transparent mode, no 3R
Dual converter
Point-to-Point, Ring, Star und meshed configurations
Distances depending on type of SFP/SFP+ and application protocol/speed
For best performance use SFP+ with integrated CDR

13. Pluggable Interfaces SFP / SFP+ / XFP
All interfaces on all Transponder Modules are SFP / SFP+ / XFP
Support of optical and electrical SFP
SFP / SFP+ / XFP are not coded
Transponder Modules X2G, M2G, T4G support SFP
Transponder Modules TXG, CXG support XFP
Transponder Module CXG+ supports SFP+
Tunable DWDM XFP are also supported (C-Band)

14. Modular CWDM Filters
Always Mux + Demux per unit
Always LC connectors
Channel spacing 20nm
Bandwith 11nm 8 channels 8 channels + Extension 5 channels + Extension + Expansion
Up to 16 Wavelengths
Can partially be combined with DWDM filters

15. Optical Power Monitoring Module OM1
Optical Power Level monitoring device
Full Duplex (Tx/Rx)
Single Lambda, CWDM, DWDM
Power Level range +20 dBm up to -40 dBm
Resolution 0,1 dB
Software definable alarm levels
No active parts in the link
No data monitoring possible
Link attenuation only 0,5 dB
Link Monitoring
Intrusion Detection
QoS documentation

16. Fiber Security Solutions
OM1: Monitoring of link attenuation
OM1
OM1
DWDM
DWDM
NMP

17. Fiber Security Solutions
OM1: Information available in NMP
Current value
Time since last threshold violation
How long and how often…
Thresholds configuration

18. Fiber Security Solutions
OM2: Spectrum Analyser
The OM2 is a standalone Spectrum Analyser. It can be connected to CWDM / DWDM links without interruption and then monitor the different wavelengths

19. Fiber Security Solutions
C/DWDM Optical Spectrum Analyser (OM2)

20. Thanks for your attention!20