1. “Innovative Peripheral Interfacing System and Peripheral Learning Platform for Embedded System-Hardware Approach”

2. GUIDED BY:- MR. V. H. KONDEKAR
STUDENTS:-
Ms. Dnyaneshwari R. Gaikwad (31)
Ms. Amruta R. Nakate (32)
Ms. Mrunal B. Shete (33)

3. CONTENTS Purpose A brief survey Introduction Software requirement
Hardware requirement
Working
Advantages and Limitations
Application and Conclusion

4. PURPOSE

5. A BRIEF SURVEY University 8051 PIC Solapur
LCD,7-segment,stepper motor ,ADC ,DAC,Matrix keyboard,DC motor, Switches ,Relay,Buzzer,RTC DS 1307,EEPROM(24C256),LED,PCF 8591
ADC,Relay,7-segment LED module(LED Bar graph ),I2C,SPI
Pune
RS-232,RS-485,I²C bus standard,ADC,DAC,Memory,LCD,Keypad(consider debounce),Stepper motor,SPI bus,RTC with 8051/89C51 using I²C Bus.
Switch, LED, LCD, keyboard, ADC,
DC motor, I2C , SPI.
Shivaji
RAM,ROM,LCD,ADC,DAC,Stepper motor,keyboard,Temperature sensor,LM(35)8051-connected to RS 232,7-Segment LED.
ADC,I2C,SPI.
VTU
Keyboard,interfacing 8051 to LCD,Parallel and Serial ADC,DAC,Stepper motor ,DC motor.
7 segment LED module,LCD,I2C,SPI.

6. What it is ??

7. SOFTWARE REQUIREMENT
Keil
Proteus
Flash Magic
Eagle

8. HARDWARE REQUIREMENTS
Microcontroller 89V51RD2, PIC16f877a
LED, Tricolored LED
Seven Segment Display
Relay
LCD Display
Key, Keypad
ADC
DAC
RTC
Motor
Universal Programmer
Power supply

9. Different Sensors with Signal Conditioning Circuits
BLOCK DIAGRAM
Output Display Peripherals Like Led, Sevens segment display, LCD Display etc
DAC, ADC, RTC
Different Sensors with Signal Conditioning Circuits
Microcontroller 8051/PIC 16F877a/Development Boards
Serial Peripherals with supported protocols I2C and SPI ,USB and CAN
Input Peripherals like Key, Keypad etc
Relay driver circuits and DC Motor/Steeper Motor

10. WORKING

11. ADVANTAGES AND LIMITATIONS
It provides debugging of multiple peripherals in a single circuit.
A controller with port pin available to use outside, gives flexibility for interfacing peripherals.
It is feasible system.

12. APPLICATIONS & CONCLUSION