1. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Investigated FE model: (a) schematic plot of the test strip, (b) top view of the strip with boundary conditions, and (c) 3D view of the full FE model

2. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Effect of springback and shot velocity on equivalent plastic strain

3. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Effect of the accumulative shot number on equivalent plastic strain for different shot velocity: (a) v = 50 m/s, (b) v = 65 m/s, and (c) v = 75 m/s

4. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Effect of shot number on residual stresses in the strip at (a) constrained state and (b) unconstrained state using shot velocity of 50 m/s

5. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Effect of shot velocity on the residual stress in the strip at (a) constrained state and (b) unconstrained state after 1500 random shot impingements

6. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Effect of strain-rate sensitivity upon: (a) resulting equivalent plastic strain versus depth and (b) induced residual stress versus depth

7. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Effect of strain-rate sensitivity upon strip arc-height

8. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Sketch of shot peening on a strip: (a) enlarged view of induced stress profile in the strip at constrained state and (b) arc-height development of the strip at unconstrained state

9. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Relationship between constrained induced stress and unconstrained residual stress from (a) Homer and Van Luchene [21] and (b) our model using 1500 shots at velocity of 75 m/s

10. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Contours of the residual stress in Almen strip (v = 75 m/s) for the strip at (a) constrained state and (b) unconstrained state

11. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Shot peening arc-height versus number of shots

12. Date of download: 1/1/2018
Copyright © ASME. All rights reserved.
From: Realistic Finite Element Simulations of Arc-Height Development in Shot-Peened Almen Strips
J. Eng. Mater. Technol. 2014;136(4): doi: /
Figure Legend:
Enlarged view of residual stress profile under different conditions: (a) peened strip during constrained state, (b) unconstrained state at 20% of total shot number, (c) unconstrained state at 50% of total shot number, and (d) unconstrained state at 100% of total shot number