1. Minimum Breaking Force
Fixmart Data Sheet V01
Product Model Catenary Wire
Catenary Wire can be used in the suspension of cable tray, ductwork, lighting, conduit, strut profiles, signage, pipe and tube. Available in mm, 3mm, and 6mm thicknesses.
Technical data supplied by the manufacturer
Minimum Breaking Force
K = 0.388
Nominal Length Mass Factor
W = 0.384
Diameter
Kg/100M kN Kg
2.0mm
1.54
3.04
310
3.0mm
3.46
6.84
698
6.0mm
13.82
27.40
2791
Remark: This technical data sheet replaces all previous versions. The technical data contained herein is given in good faith and we cannot be held liable for any errors, inaccuracies, omissions or editorial failings. The information detailed in this technical data sheet is given by way of indication and is not exhaustive, users should contact either the seller or the manufacturer of the product for additional technical information concerning its use, if they think the information in their possession needs to be clarified in any way.
Solutions, Service and Supplies to the Trade Springhead Enterprise Park, Springhead Road, Northfleet, Kent DA11 8HJ T F E