1. ECE265
ECE 265
Final Exam Review
9/14/2018

2. Final Exam Topics
What is on the exam – Specifics will not be provided, but
This will provide some guidance.
Much of the final topics incorporate the knowledge from earlier in the course so it is by nature, comprehensive.
The exam will be 4 topic areas and I will give what they are.
In each topic there will be 5 or so multiple choice questions in each area.
ECE265
9/14/2018

3. Topic Area
Topic area 1
Know the 68HC11 A-to-D converter. How do you set it up for specific conversion. I will assume that you only have the 4 A- to-D inputs, the 68HC11 version of the microcontroller.
A-to-D conversion in general. Things like what is FSR?
For the 68HC11 which has a FSR of 0 to 5.12V, what digital value would be obtained after A-to-D conversion for 1.28 V?
The HC11 produces an 8 bit conversion so you have 20mV/bit.
This gives 1.28V/20mV = 64 
What value do you place in the ADCTL to set up a specific pin for conversion? One time only, continuous, all for pins once, continuously? Which register is the result of conversion placed in.
When does conversion start and how long does it take?
ECE265
9/14/2018

4. Topic Areas - continued
Topic area 2 – Assembler instructions
Hand assembly of instructions including branch instructions.
Branches, range and how to calculate the value for forward and back branches.
How long instructions take to execute
Program analysis
Topic area 3
Interface to the ports of digital devices or switches, leds, etc.
The difference in the ports on the HC11and setting up those that need setup
Topic area 4
Conversion of pseudo code to assembler language and assembler language and general questions on programming.
ECE265
9/14/2018

5. Assignment Study for the exam. Look over the lecture slides.
Go over the quizes
Review the homework problems.
ECE265
9/14/2018