1. Li Ion Battery (LIB)
K.Devaki

2. Battery
Battery: Transducer which converts chemical energy into electrical energy and vive versa.
Chemical reactions: Oxidation and reduction
Free energy change of the processes appears as electrical energy.
Primary battery-not rechargeable
Secondary battery- rechargeable

3. Why Li-Ion Battery?

4. Ni metal hydride battery
Lead acid battery
Ni metal hydride battery
Appealing to industrial applications due to
Reliable
Inexpensive
Disadvantages
Low life cycle
Low energy density
(30 ~ 40 Wh/Kg)
Appealing to hybrid electric vehicle applications due to
Rechargeable
No memory effect
High power density
High energy density
Currently available battery capacity : 1.5 kWh
Disadvantages
Self discharge rates

5. Cadmium crystals have the memory effect (NiCd)
Recharge-ability : Basically, when the direction of electron discharge (negative to positive) is reversed, restoring power.
Memory Effect : When a battery is repeatedly recharged before it has discharged more than half of its power, it will “forget” its original power capacity.
Cadmium crystals have the memory effect (NiCd)

6. Schematic of Li Ion Battery
The cathode half reaction (with charging being forwards) is:
LiCoO2 ↔ Li 1-x CoO2 + xLi+ + xe-
The anode half reaction is:
xLi + + xe- + 6C ↔ Lix C6
J. Mater. Chem., 19 (2009) 5871

7. Li Ion Battery
Contains an anode, a cathode, an electrolyte and separator.
Harnesses a set of reversible oxidation/reduction reactions.
Li ion dissolved by a discharge reaction and returns to metallic lithium by a charging reaction
Electrolyte provides for the separation of Li ions and electron transport.
In a perfect battery the Li ion transport number will be unity.
Cell potential is determined by ∆G= -EF
The electrode system must be both a good ionic and an electronic conductor.
It is necessary to add an electronically conductive material such as carbon black.
To hold the electrode together, a binder is also needed.

8. Advantages Disadvantages
Li has greatest
electrochemical potential
Lighter than others
Shape and size variation
High open circuit voltage
No memory effect
Low discharge rate 5-10%.
Internal resistance of lithium ion battery is high as compared to other batteries.
Due to overcharging and high temperature capacity will diminish.

9. Existing Li-Ion Electrodes
Graphite – 370 mA.h/g
LiCoO2– 140 mA.h/g

11. The development of materials for LIB centres around “intercalation” and suitable electrolyte with appropriate “potential window”.
Intercalation
Intercalation is an equilibrium process and governed by the free energy considerations.
Entropy factor may predominate over the enthalpy factor.
The lattice in which intercalation takes place should be capable of interacting electronically without affecting the translational entropy of the intercalant.
The value of the equilibrium constant of the intercalation and deintercalation reaction should be near 1.

12. Intercalation Should be completely reversible.
Should be geometrically and electronically fitting to the inter planar spacing.
Should be capable of electron exchange.
Other substrates like mesoporous carbon and other pillared materials can also be considered.
Intercalation

13. The selection of the electrolyte depends on the potential window.
Potentials are beyond water potential and hence non aqueous electrolyte.
It should not reactive with Li+ ions, since it will decide the transport of the Li+ ions for the intercalation reaction.
The electrolyte solution commonly comprises a lithium salt dissolved in a mixture of organic solvents.
Examples include LiPF6 or LiBOB (the BOB is the anion with the boron coordinated by two oxalate groups) in an ethylene carbonate/dimethyl carbonate solvent.
Electrolyte

14. Graphite is commonly selected anode material in LIB due to its
High coulombic efficiency.
However, the specific capacity of graphite is relatively low (theoretical value: 372mA.h/g) since every six carbon atoms can host only one lithium ion by forming an intercalation compound (LiC6).
Sn: 993 mA.h/g, Si: 4200 mA.h/g) than graphite via the formation of alloys with lithium or through the reversible reactions with lithium ions.
Drawback of these substances as anode materials is the huge volume variation during the charge/discharge process which causes the pulverization of the electrode, resulting in poor reversibility.
Graphite

15. Reducing the size of these materials to nanometer scale can partially suppress the expansion and shrinkage of the anode
materials.
By designing the structure of these materials as hollow spherical or porous particles can improve the lithium storage capacity and their initial Coulombic efficiency as well to a certain degree.
However, the capacity decay of the electrode along with the charge/discharge cycling still can not be completely avoided.

16. Graphene 2D
Basic building block for all forms of graphitic material made up of monolayer C atoms tightly packed into 2D honeycomb lattice.
Remarkable properties
Young’s modulus - 1,100GPa
Fracture strength - 125GPa
Mobility of charge carriers - 200,000
cm2 V-1 s-1
Thermal conductivity - 5,000 W m-1K-1
Specific surface area m2g-1 0D 1D 3D
K. S. Novoselov, Nature, 438 (2005) 197.

17. Graphene, a two-dimensional aromatic monolayer of carbon atom, is actually the building unit of graphite.
Recently, metal oxides nanoparticles encapsulated by graphene layers have been reported to display high specific capacity and excellent cycling performance as anode materials.
The structure, in which the graphene layers acted as both a ‘‘buffer zone’’ of volume variation of the nanoparticles and a good electron transfer medium.
Graphene

18. Schematic illustrations of graphene based carbonaceous materials with ordered graphene structures (A-C) and disordered graphene structures (D-E), and intercalation of Li ions in the ordered (G) and disordered (H) graphenes.

19. Key Issues
Low theoretical capacity (372 mA.h/g) (Due to perfection of graphene structure and dense packing of the graphene layers).
Long diffusion distance of lithium ions into its host position between the graphene layers (Due to large graphene size).
One of the simple ways to shorten the diffusion distance of lithium ion is to minimize the size of graphenes in the graphitic materials.
However, a more efficient way is to arrange the graphene layers into a nanoscale one-dimensional fiber with graphene layers oriented perpendicular to the fiber axis (CNFs).

20. Reversible capacity : 461 mA.h/g @ 0.1 C 170 mA.h/g @ 10 C
Coulombic efficiency : 95 %
The smaller the diameter of the CNF, the better the rate capability.
J. Mater. Chem., 2009, 19, 5871

21. The exfoliated graphite oxide nanoplatelets showed a very high reversible specific capacity of more than 1000 mA.h/g when they were incorporated with polyelectrolytes into a layer-by-layer structure.
The exfoliation and chemical modification of graphene were believed to be the main reasons for the performance enhancement.
The modification of graphite actually led to disordered carbon, for which the electrochemical mechanism was believed to be
different from that of graphitic carbon.

22. Disordered Graphene materials
The single layer graphene in disordered carbon was proposed to form Li2C6 since both of the graphene surfaces could host lithium ions.
The reversible capacity increased with the increase of single layer graphene fraction as well as the micro-porosity in the
disordered carbon.
Porosity is important for improving the capacity and cycling performance of disordered carbon anode materials.
However porosity can somehow reduce the energy density of the anode materials.
Disordered Graphene materials

23. Key Requirements for Cathode
The discharge reaction should have large negative Gibbs free energy (high discharge voltage).
The host structure must have low molecular weight and the ability to intercalate large amounts of lithium (high energy capacity).
The host structure must have high lithium chemical diffusion coefficient (high power density).
The structural modifications during intercalation and deintercalation should be as small as possible (long life cycle).
The materials should be chemically stable, non-toxic and inexpensive.
The handling of the materials should be easy.

24. Typical energy densities of lead, nickel- and lithium-based batteries 

25. LiCoO2 LiCoO2 is the most widely used positive electrode.
The theoretical capacity of LiCoO2 is approximately
274mAhg−1.
The practical capacity is limited to almost half the theoretical value due to a hexagonal to monoclinic phase transformation upon charging between 4.15 and 4.2V.
The dissolution of cobalt ions (Co4+) has also been reported as a reason for the deterioration of the crystal structure.
In order to prevent phase instability, the substitution of
metal elements for Co in LiCoO2 or a surface coating has been suggested.
Various metal oxides (e.g.,MgO,Al2O3, ZnO) and metal
phosphates (e.g., AlPO4, FePO4) have been coated on the surface of LiCoO2 and reported to improve the cyclability of LiCoO2.
LiCoO2

26. V2O5 Coated LiCoO2
(a) First charge and discharge curves of samples with a cut-off voltage ranging
from 3.0 to 4.2 (b) Cycle-life performance of samples with cut-off voltage ranging from 3.0 to 4.4 V.
J. Power Sources 188 (2009) 583

27. MgO Coated LiCoO2
(a) Plots of specific discharge capacities (b) Plots of Cycling stability
J. Power Sources 132 (2004) 195

28. Al2O3 Coated LiCoO2 .
(a) Initial capacities and (b) cycle-life performances of bare and coated LiCoO2 cathodes measured at the rate of 0.5C between 4.4 and 2.75 V in Li/LiCoO2.
Chem. Mater. 2000, 12, 3788

29. Al2O3 Coated LiCoO2
(a) Cyclic voltammograms of the uncoated LiCoO2
cathode and
(b) Al2O3-coated LiCoO2 cathode. The scan rate was 0.02 mV/s.
H and M in (a) denote the hexagonal and
monoclinic phase, respectively.

30. Al2O3 Coated LiCoO2
Plots of capacity retention of (a) bare LiCoO2 and
(b) coated LiCoO2 heat-treated at 600 °C for 3 h as a function of cycle number. Charge and discharge rates are 0.5- and 1C,
respectively.

31. The coating of vanadium oxides imparts a better cycle performance at a high-charge cut-off voltage by preventing cation mixing during cycling and reducing the active surface area that contacts the electrolyte.
MgO  probably due to the electrochemical inactivity of MgO particles.
The improved cycle performance is due to the formation of amorphous Al2O3 layer on the surface of LiCoO2 particles. The Al2O3 film could prevent Co dissolution from the LiCoO2 structure and decrease the capacity loss.

32. LiFePO4 (LFP)

33. LiFePO4 Characteristics
1. Thermal stability
LiFePO4 is made of a skeleton of PO4 polyanions that is very stable thermally while favorable to one dimensional Li+ ion reversible diffusion.
Covalent P-O bond stabilize the oxide when fully charged and avoid O2 release making LiFePO4 the most stable commercial cathode material.
Has stability and tolerance to overcharge.
2. Good electrochemical characteristics
Long calendar life for the stable olivine structure.
High tolerance to high and low-voltage abuse.
Lower thickness change of full cell during charge and discharge.
3. Abundant resource of basic elements
4. Environmentally friendly
LiFePO4 Characteristics

34. Why C-LiFePO4 ?

35. LFP has attracted much attention due to
Low cost
Low toxicity
Relatively large capacity
But, Electrochemical performance deteriorate with increasing charge/discharge rates due to its low electronic conductivity and Li ion diffusion rate.
Followed Strategies to improve the performance
Carbon coating
Metal loading
Particle size reduction
Core shell LFP/C nanocomposite – 90 mA h/ g at 60C.
Highly dispersed LFP nanoparticles on nanoporous carbon discharge at a rate of up to 230C.
Lithium phosphate coated LFP nanoparticles could be discharged in 10-20s.

36. Illustration of the preparation process and the microscale structure of LFP/graphene composite.
J. Mater. Chem., 2011, 21, 3353

37. (a,b) SEM images showing an overview of the LFP/G particles.
(c) TEM image
(d) corresponding elemental map using EELS.
where red represents the LFP
nanoparticles and the green
represents graphene sheets.
(e) TEM image on the edge of individual microspheres.
(f) TEM image showing a 3D graphene network

38. (a,b) SEM images of LFP/C and LFP/(G + C) secondary particles.
(c,d) SEM images with a high magnification showing the surface of an individual LFP/C and LFP/(G + C) secondary particles.
(e,f) TEM image illustrating a local area of one LFP nanoparticle in an LFP/C and LFP/(G+C) secondary particles.

39. Raman spectra of LFP/C, LFP/(G + C), and LFP/G.
XPS spectra of LFP/G,
LFP/(G + C), and LFP/C.

40. Rate discharge curves of (a) LFP/G, (b) LFP/C, and (c) LFP/(G + C)
Rate discharge curves of (a) LFP/G, (b) LFP/C, and (c) LFP/(G + C). (d) Comparison of rate capability of LFP/G, LFP/C, and LFP/(G + C).

41. Comparison data among various Lithium base batteries
Battery
LiFePO4
LiCoO2
LiMn2O4
Li(NiCo)O2
Stability
Stable
Not Stable
Acceptable
Environmental Concern
Most Enviro- friendly
Very Dangerous
Cycle Life
Best/ Excellent
Power/Weight Density
Good
Best
Long Term Cost
Most Economic/ Excellent
High
Temperature Range
Excellent
(-20 to 70 °C)
Decay Beyond(-20 to 55 °C)
Decay Extremely Fast over 50 ° C
-20 to 55 °C

42. Material
Capacity in theory
Real capacity
Density
Character
LiCoO2
275
5.00
Stable, high capacity ratio, smooth discharge platform, low life cycle
LiNiO2
274
4.78
Very high capacity, poor stability, low material cost
LiMnO4
148
4.28
Low material cost, better in safety, poor high temperature performance, Poor charge/discharge character
LiFePO4
170
3.25
Low material cost, better in safety, very long cycle life, poor conductivity 

43. Thank you