1. WELCOME TO OUR
PRESENTATION

2. PRESENTATION ON ROOFS AND ROOF COVERING BY MD
PRESENTATION ON ROOFS AND ROOF COVERING BY MD.MOHAIMENUL ISLAM(126) SALMAN SAKIB(127)

3. INTRODUCTION A roof may be defined as the uppermost part of the building, provided as a structural covering, to protect the building from weather (ie, from rain, sun, wind etc.) The roof coverings may be A.C sheets, G.I sheets,wooden single,slates, tiles, slates or slab itself.

4. REQUIREMENTS OF A ROOF • It should have adequate strength and stability to carry the super-imposed dead and live loads. •It should effectively protect the building against rain, sun, wind, etc.and it should be durable against the adverse effects of these agencies. • It should be waterproof and should have efficient drainage arrangements. •It should provide adequate thermal insulation. •It should be fire resistant. •It should provide adequate insulation against sound. Most forms of roof construction provide for majority of buildings an adequate insulation against sound from external sources.

5. TYPES OF ROOF STRUCTURE
Flat roof
Pitch roof
Space frame
Roof shell
Folded plate
Tensile structure

6. Flat and Pitched roof are two main types among the classification.
Flat roof
A roof is designated as flat if it’s slope is less than ten degrees. Slope less than 3:12 or 25 percent.
Pitched roof
Pitched roof is a roof structure where
the roof leans to one side of the house.
It is also known as lean-to roof.

7. FOLDED PLATE TENSILE SRUCTURE
SPACE FRAME ROOF SHELL
FOLDED PLATE TENSILE SRUCTURE

8. Frame Roof Construction Several features of traditional frame roof construction should be considered before designing a roof. The roof framing is designed to support the roof covering materials. Framing must be strong and rigid. Roof framing consists of several distinct structural elements.
Rafters
The rafter is a structural element of the roof that supports the sheathing.
Common rafters are perpendicular to the wall plate and extend from the ridge.
There are several other types of rafters used in typical construction.
Rafters are often shown on a roof framing plan.

9. Roof Framing Plan

10. Ventilation Gable Style

11. Roof Ventilation Methods

12. SLATE ROOFING TILES ALLHABAD TILES BURNT CLAY TILES CONCRETE TILES
TYPES OF ROOF COVERING
SLATE ROOFING TILES
ALLHABAD TILES
BURNT CLAY TILES
CONCRETE TILES

13. SLATE ROOFING TILES ALLHABAD TILES
BURNT CLAY TILES CONCRETE TILES

14. ROOF COVERING FOR PITCHED ROOFS
THATCH COVERING
SHINGLES
TILES
ASBESTOS-CEMENT SHEETS
GALVANISED CORRUGATED IRON SHEETS
SLATES

15. THATCH COVERING SHINGLES TILES
ASBESTOS-CEMENT SHEETS GALVANISED CORRUGATED IRON SHEETS SLATES

16. QUESTION AND ANSWER SESSION

17. Thanks To All