1. Chapter 6 Sectional Views

2. Test Next Week Will cover Assignments 1-4 (Chap 1-5) Open Book
AutoCAD commands, basic/advanced
Hand sketching isometric, orthographic views
AutoCAD orthographics (complete a drawing)
Open Book
1.5 hours 12:30 – 2 pm
9 – 12:15 Ch 7 Auxiliary Views

8. Cutting Plane Lines Use DASHED lines
Can make a layer for Cutting Plane Lines OR
Format>Linetype>Load DASHED
Modify>Properties, Select Linetype—DASHED\
Add a leader: Leader tool from Dimension Tbar
Use OSNAP Perpendicular to find pt of arrow
After placing, enter twice, letter A, enter twice
Sometimes messes up with a little leader extension
Arrowheads: DimensionStyles, arrows, scale 0.5

13. Drawing Hatch Draw a few closed shapes
Draw Tools > Hatch, then PickPoints and
Click inside area(s) then enter when done
Click OK—hatch will be there
Adjust Hatch size/pattern (Draw>Hatch)
Check out patterns ANSI31, etc.
Change angle and scale