1. Date of download: 1/7/2018
Copyright © ASME. All rights reserved.
From: Correlations of Bubble Diameter and Frequency for Air–Water System Based on Orifice Diameter and Flow Rate
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Schematic diagram of the experimental setup: A—control valve, B—digital mass flow meter, C—light source, D—single orifice setup, E—glass tank, and F—high-speed camera

2. Date of download: 1/7/2018
Copyright © ASME. All rights reserved.
From: Correlations of Bubble Diameter and Frequency for Air–Water System Based on Orifice Diameter and Flow Rate
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Measured and predicted values comparison for bubble size

3. Date of download: 1/7/2018
Copyright © ASME. All rights reserved.
From: Correlations of Bubble Diameter and Frequency for Air–Water System Based on Orifice Diameter and Flow Rate
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Measured and predicted values comparison for bubble frequency

4. Date of download: 1/7/2018
Copyright © ASME. All rights reserved.
From: Correlations of Bubble Diameter and Frequency for Air–Water System Based on Orifice Diameter and Flow Rate
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Captured images of bubble formation for 0.30 mm orifice under a flow rate of (a) SLPM, (b) SLPM, and (c) 0.15 SLPM

5. Date of download: 1/7/2018
Copyright © ASME. All rights reserved.
From: Correlations of Bubble Diameter and Frequency for Air–Water System Based on Orifice Diameter and Flow Rate
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Captured images of bubble formation at a flow rate of qm = 0.050 SLPM for an orifice size of (a) 0.20 mm, (b) 0.41 mm, and (c) 0.61 mm

6. Date of download: 1/7/2018
Copyright © ASME. All rights reserved.
From: Correlations of Bubble Diameter and Frequency for Air–Water System Based on Orifice Diameter and Flow Rate
J. Fluids Eng. 2016;138(11): doi: /
Figure Legend:
Comparison between Eq. (10) with reported literature at a flow rate of (a) SLPM, (b) 0.1 SLPM, and (c) 0.15 SLPM and different orifice sizes