1. PRE-PSM Briefing FKMP Semester 2 2017/2018
DR. MOHD NORIHAN BIN IBRAHIM
A202-05, KAMPUS BANDAR, UTHM/
E , KAMPUS INDUK, UTHM
FKMP

2. FKMP PSM Committee 2017/2018 A/PROF. DR SALIHATUN BINTI MD SALLEH
DEPUTY DEAN (ACADEMIC)
PSM COORDINATOR
DR MOHD NORIHAN BIN IBRAHIM
A KAMPUS BANDAR /
JKBR
A/PROF. DR HAMIMAH BINTI ABD RAHMAN E
JKM
DR. ZAMRI BIN NORANAI
D1-210
JKT
MD NOR ANUAR BIN MOHAMAD
Aras 5 Bilik PM 17 FSKTM
TN HJ. SAIFUL FAZAD BIN AHMAD
PUSAT SUMBER, FKMP
BLOCK C6
JKPI
ZAZULI BIN MOHID
D1-314
JKA
A/PROF DR. ZAMRI BIN OMAR C
FKMP

3. PSM IMPLEMENTATION IN FKMP
Introduction
Pre-requisite
Goal
Course Learning Outcome
Attendance and Regulation
PSM supervisor / Supervisor Selection
Logbook
FKMP

4. Introduction
The Bachelor’s Degree Project (PSM) is a systematic academic training which utilizes the use of engineering knowledge, skills, concepts and problem solving techniques.
A project may involve:
(1) study of a phenomenon/process/system,
(2) design/construction of components/products,
(3) software development, or
(4) case study.
A project could be industrial-based or lab-based.
FKMP

5. PSM divided into 2 semester (PSM I dan PSM II)
Pre-requisite PSM I – Minimum 100 credits (latest syllabus 5.2.1)
PSM I is a pre-requisite for PSM II
PSM I and PSM II must be done in two semester continuously.
FKMP

6. Pre-requisite Pre-requisite(Latest) Pre-requisite (old & dissolved)
Minimum 100 credits
Total credits(not including current credits)
Pre-requisite (old & dissolved)
Fluid Mechanics II
Thermodynamics II
Mechanical component design
FKMP

7. Goal
The main goal of the Bachelor’s Degree Project I is to expose students to academic research projects enabling them to utilize the knowledge and skill gained throughout their undergraduate studies as well as enhancing their generic skills.
FKMP

8. Learning Outcome
At the end of this course, the students will be able to:
Apply knowledge of mathematics, science, engineering fundamentals and an engineering specialisation to the solution of complex engineering problems within project (C6, LO1)
Communicate effectively on complex engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective project reports and design documentation, make effective seminar presentations, and give and receive clear instructions; (P4, LO3)
FKMP

9. Learning Outcome
Conduct investigation into complex problems using research based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of information to provide valid conclusions in project report; (P4, LO4)
Recognise the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change within project implementation. (A4, LO6)
FKMP

10. Learning Outcome
Demonstrate knowledge and understanding of engineering and management principles and apply these to manage projects and in multidisciplinary environments; (A4, LO9)
Understand the impact of project in societal and environmental contexts and demonstrate knowledge of and need for sustainable development; (A4, LO12)
FKMP

11. Taksonomi Pembelajaran (Learning Taxonomy) Kognitif (Cognitive)
Psikomotor (Psychomotor)
Afektif (Affective) C1
Pengetahuan (Knowledge) P1
Persepsi (Perception) A1
Menerima (Receiving) C2
Pemahaman (Comprehension) P2
Set (Set) A2
Memberikan Maklum Balas (Responding) C3
Aplikasi (Application) P3
Respons Berpandu (Guided Response) A3
Menilai (Valuing) C4
Analisis (Analysis) P4
Mekanisme (Mechanism) A4
Mengorganisasi (Organising) C5
Sintesis (Synthesis) P5
Respons Ketara Kompleks (Complex Overt Response) A5
Menghayati Nilai (Internalising) C6
Penilaian (Evaluation) P6
Adaptasi (Adaptation) P7
Lakuan Tulen (Origination)
FKMP

12. Attendance & Regulation
PSM 1 – 2 credit, meeting with SV at every week (Depend on discussion with SV)
Attending seminar is a MUST
Not attending seminar = FAIL
FKMP

13. Registration Register according to supervisor department as following;
Section 1 – JKBR
Section 2 – JKT
Section 3 – JKM
Section 4 – JKPI
Section 5 - JKA
FKMP

14. SUPERVISOR SELECTION
Login system – Student have to login in SMAP online at
FKMP

15. Then, choose the PSM Module
FKMP

16. Click on ‘cari’ to choose the supervisor
FKMP

17. Key in the name, and a list will be appear
FKMP

18. Click on the staff number that you are willing to choose
Then, click ‘kemaskini’
You will be able to change to other supervisor if they are still available
Selection is based on first come first serve basis
FKMP

19. Website : http://fkmp.uthm.edu.my/RIDC/
COR & COE at FKMP, UTHM
COE (Centre of Excellence)
AMMC (Advanced Manufacturing & Material Center)
Head of AMMC: Assoc. Prof. Ir Dr. Md Saidin bin Wahab
COR (Centre of Research)
MPROVE(mechanical failure prevention & reliability)
Head of MPROVE: Assoc. Prof. Dr. izzuddin bin Zaman
PREMACH(precision machining research center)
Head of PREMACH: Assoc. Prof. Dr Erween bin Abdul Rahim
CEIES(center for energy and industrial environmental studies)
Head of CEIES: Dr. Mohd Faizal bin Mohideen Batcha
Website :
FKMP

20. Website : http://fkmp.uthm.edu.my/RIDC/
Focus Group at FKMP
Engineering Mechanics Department (JKM)
SIMREG (structural integrity and monitoring researcg group)
COLORED(crashworthiness and collision research group)
NOVIA(acoustics noise and vibration)
SPEAR(sports engineering advancement research)
ADCARE(advance dynamics control research group)
Website :
FKMP

21. Website : http://fkmp.uthm.edu.my/RIDC/
Focus Group at FKMP
Material & Design Engineering Department (JKBR)
BioMa (bioactive material)
FCS (functional composite structure)
NanoSurf(nano structure and surface modification)
EDRG(engineering design research group)
Website :
FKMP

22. Website : http://fkmp.uthm.edu.my/RIDC/
Focus Group at FKMP
Industrial & Manufacturing Engineering Department (JKPI)
PREMACH (precision machining research centre)-CoR
ADDMAN(additive manufacturing research group)
AFRG(advanced forming research group)
SSS (smart structures and systems) ---dissolved
ISE(industrial and system engineering)
Website :
FKMP

23. Website : http://fkmp.uthm.edu.my/RIDC/
Focus Group at FKMP
Energy & Thermo Fluid Engineering Department (JKT)
ARG(automotive research group)
CRG(combustion research group)
FASTREG(flow analysis, simulation and turbulence research group)
IIERG(industrial and indoor environment research group)
EnRG(energy technology research group)
Aeronautic Engineering Department (JKA)
APR(aerodynamics and propulsion research)
ASDR(aircraft and design research)
Website :
FKMP

24. Before you made any selection
Think!!
Before you made
any selection
FKMP

25. PSM Logbook Student need to note down all activity
All student need to have logbook which can be purchased at Pusat Sumber FKMP, C6
Logbook usage:
Student need to note down all activity
Record each meeting with supervisor
All PSM forms included in the appendix
Log book will be evaluated by the supervisor
FKMP

26. PSM preparation
Announcement and information from website FKMP PSM Online and FKMP official fb.
Ensure your interest, do some reading
Register PSM online in SMAP
Attending all briefing by the PSM committee.
FKMP

27. Where to find journals www.sciencedirect.com scholar.google.com.my/
FKMP

28. FKMP-PSM ONLINE SYSTEM
All announcement will be made via official FKMP facebook or PSM Website:
Around 100 pages max limit
PSM 1 comb bind
PSM 2 hard bind
Plagiarism TURN IT IN
FKMP

29. After supervisor selection
See and discuss with the supervisor as soon as possible
Your PSM is your responsibility!!
FKMP

30. Thank You & Q&A Session
FKMP