1. Eric building the fin mount.

2. Brenton gluing the body tube.

3. Eric attaching the fin mount to the body tube.

4. Eric gluing the shock cord mount.

5. Brenton installing the shock cord.

6. Brenton attaching the shock cord & parachute to the nose cone.

7. Eric installing the assembled nose cone with the attached parachute and shock cord into the body tube with three squares of recovery wadding.

8. Max relaxing.

9. Eric putting in the igniter for the engine (after engine was installed
Max

10. Brenton assembling the launch pad.

11. Eric placing the rocket on the launch pad.

12. Brenton decorating the rocket.

13. The completed rocket and its builders.