Download presentation
Presentation is loading. Please wait.
1
Installing Windows Deployment Services on
Windows Server 2008 R2. Make sure you have installed the following pre-requisites before proceeding with these instructions: Active Directory DNS Server DHCP Server These instructions assume that the above roles have been installed on the same physical server as the one you are about to install WDS. Also bear in mind that you need a NTFS partition to store your images when.
2
Install the Windows Deployment Services role
Click on Add roles on the Initial Configuration window
3
Select the box next to Windows Deployment Services
4
Click Next
5
Make sure both Deployment Server and Transport Layer are checked
6
Click Install
7
The installation process should only take a few minutes
Click Close
8
Open Server Manager Expand, Roles, Windows Deployment Services, Servers Right click on your server and select Configure Server
9
Click Next
10
In this stage you need to assign a Remote Installation folder
Click browse… Create a Remote Installation Folder in your NTFS-partitioned drive
11
Click Next
12
Check both boxes (this guide assumes DHCP server role is installed on this same server)
Click Next
13
Decide on whether your PXE server will respond to all computers or just to known computers.
Click Next
14
The wizard will configuration your WDS based on your options.
This should only take a few minutes.
15
Do not check this Click Finish and installing WDS is complete
16
Open Windows Deployment Services and verify it looks something like this.
You can open Windows Deployment Services from All Programs, Administrative Tools.
17
That’s it. With WDS installed you can go ahead and install MDT 2010 on your server. Instructions are available on my blog.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.