1. Programming Part 2 Mod Kit
IQ Robotics

2. Every team must build a robot that meets the following requirements – EXACTLY
Drive Base – Two Motors
Right motor connected to Port 1
Left motor connected to Port 2
One Touch LED mounted and visible on the top
Connected to Port 3
One Distance sensor mounted on the front bumper
Connected to Port 4
One bumper switch mounted on the back bumper
Connected to Port 5
Brain and battery must be easily accessible
Programming Quiz

3. Programming Quiz

4. Practice programming distance sensor, bumper switch and touch LED
Programming Quiz

5. Programming Quiz Programming the touch LED
Select the “blocks” icon at the top
Select the touch LED, or whatever you named it along the ribbon
Programming Quiz

6. Try coding this.
Download and see if it works
Programming Quiz

7. Programming Quiz Bumper Switch
Again, make sure the bumper switch, or whatever you are calling it is selected on the ribbon
Programming Quiz

8. Try coding this.
Download and see if it works
Programming Quiz

9. The bumper switch can change the LED if you program in the LED section
Programming Quiz

10. Programming Quiz Now the distance sensor
As usual make sure you are in the distance sensor part of the ribbon
Programming Quiz

11. Enter this and try to run it, put your hand in front of the sensor to see results on the screen
Programming Quiz

12. Use blocks on the drive train to complete the following
Programming Quiz

13. You need to be comfortable that you can program each of these four components to your robot.
Try these challenges before the quiz
Start backwards, then switch to forward when the bumper switch is bumped
Turn on the LED from a button on the controller
Drive up to wall, turn right, drive up to next wall (forever)
Programming Quiz

14. New groups
Programming Quiz

15. How the quiz will work. Each student will select one quiz paper, each of the 15 possible papers are different. Each includes three tasks that must be completed, and two challenge tasks.
Each student will program this on their own, without help from other students. Each student may refer back to their previous work, their notes or their notebook.
Because all the robots are the same, students may program on any one of the robots.
PLEASE use simple file names, easily identified as your file.
Programming Quiz