1. GFARA NOVEMBER 2016 BY Jeffrey Cronin KB1MZL
Photo by author
NEXT SLIDE / What got me going

2. Next slide cost breakdown
Photo courtesy of the ARRL

3. 49er QRP XCVER UPGRADE Forty9er kit................$10 to 15
AD9850 DDS $10 to 15
Propeller Proto board $20
8 Digit 7 Segment display....$6
Misc components $5
TOTAL around … $50 OR
Substitute Propeller board for Arduino $5
TOTAL … $35
Next slide build process

4. The Process Inspiration, Motivation, Dedication then
Consternation, Humiliation, Degradation
Cup of Coffee
Repeat
If you don't love this process
DON'T START
Next slide original forty9er kit

5. Photo Courtesy of the ARRL
Photo Courtesy of the ARRL Next slide / original forty9er circuit
Photo Courtesy of the ARRL
Next slide completed forty9er board with mods

6. Photo Courtesy of the ARRL
Next slide / DDS and Filter MOD

7. Photo Courtesy of the ARRL
Next slide entire circuit overview

8. Next slide / completed forty9er board
Photo Courtesy of the ARRL

9. Photo Courtesy of the ARRL
Next slide / DDS board
Next slide DDS board (VFO)

10. DDS BOARD (VFO) Photo Courtesy of the ARRL
NEXT SLIDE / Propeller Proto Board

11.
NEXT SLIDE / All Completed Boards

12. Photo by the author

13. The End?
NO! There's next month!
Next slide / Next Month

14. December Build
Antenna Analyzer
under $75
See you Next Month