1. Introduction to client/server architecture

2. Objectives Explain what is the client/server architecture How it works
Examples for client/server architecture
Other network architectures

3. What is a computer network?
Computer network A collection of computing devices that are connected in various ways in order to communicate and share resources
Usually, the connections between computers in a network are made using physical wires or cables, However, some connections are wireless, using radio waves or infrared signal

4. What is a computer network?
The generic term node or host refers to any device on a network
Examples of networks…

5. client-server Model
client-server Model: Model of a computer network in which many clients  (remote processors) request and receive service from a centralized server (host computer)
The most basic type of client-server architecture employs only two types of nodes: clients and servers.
This type of architecture is sometimes referred to as two-tier.
It allows devices to share files and resources.

6. Server-Based Networking
A single computer that provides extensive multiuser access to network resources
Can handle hundreds of users at once
Fast response
Less network congestion when multiple workstations access the same resource

8. What Servers do?
Essentially, any server must serve a network — either clients or other servers, or some combination of the two.
The term server also includes the actual server operating system that makes the computer do its job.
Commercial server software products such as Windows Server 2008 are designed to handle a greater frequency and variety of tasks than are typical in either the desktop or workstation

9. How it works The client will follow this process:
1. Initiate a request: The client caller requests access to some resource or information from the remote server.
2. Wait for a reply: A participating server issues a reply, either permitting or forbidding the connection, which may require authentication in some cases.
3. Connect and interact: If access is granted, the client possibly authenticates and then begins interacting in some fashion with the server.
The client-server networking paradigm describes the basic nature of opera-
tion between two computers that establish a connection and exchange data
or share resources. The process typically begins when a client caller makes a
request to a server application or service — this typifies a normal client-
server transaction.

10. How it works The server will do the following:
1. Listen for a request: Calling clients come and go as they please, requesting to initiate and interact with hosted services.
2. Process the request: Once received, the client request may optionally require authentication.
3. Connect and interact: At this point, both client and server are connected on a common channel and able to share resources or information.
Examples: clients send and receive messages from servers.
Web browser clients broker data connections to FTP and Web servers.

11. Client/server roles Server provides the service
Client is considered as the customer requesting the service
The server service can be shared among a number of clients
Clients must request or initiate the service
The location of the server in the network is transparent to clients
Transaction between C/S is message-passing based
C/S architecture is scalable
horizontally (more clients can added)
Vertically (more servers can be added)
The server is centrally maintained where as clients are independent of each other

12. Why do we use servers
A server is designed and intended to provide services and run server applications under heavy workloads, left unattended and self-managing most of the time.
Larger amounts of memory (upwards of 8GB or more), larger storage capacity (terabytes, petabytes, and beyond), special storage methods (mirroring, striping, and multiple disk aggregation), redundant power supplies.

13. Systems with Client server model
File servers
File sharing and file processing
Data base servers
Passing file results
Example: Query in DBMS server
Typically one single request/reply
Transaction servers
Transaction server includes DBMS and transaction monitoring
Server has remote procedures run online by the client
web servers
Super-fat servers and clients
Uses HTTP protocol
Java was first to introduce interactive C/S forms

14. Clustering Clustering Advantages
Linking two or more discrete computer systems so they appear to function as though they are one
Advantages
Increases computer speed.
Provides more computing power.
Increase performance.

16. Peer to Peer Model P2P
In this model, participants act as both clients and servers, sometimes sharing multiple parts of a single piece of data
In P2P networks, clients provide resources as well as using them. This means that unlike client-server systems, the content serving capacity of peer-to-peer networks can actually increase as more users begin to access the content (especially with protocols such as Bittorrent that require users to share)

18. Homework
What is the difference between Client/server and peer to peer model? (do some research to find the answer and summarize it in a table )