1. MacDermid Canning Plc. TRANSOCEAN
Marston Bentley Div.
Tom McKechnie
Simon McManus

2. Offshore Fluids Presentation
MacDermid Canning
Production Control Fluids
Exploration Control Fluids
Motion Compensator Fluids

3. MacDermid Canning
B.S.I. Registered to ISO 9001 and ISO for manufacture, delivery and research.
Facilities include the QC lab, R&D lab, Fluids test lab and Hydraulic test lab.

4. MacDermid Canning Ltd
Manufacturing sites in Wigan, England and Houston Texas.
Storage in Aberdeen, Great Yarmouth, Bergen, Stavanger, Port Elizabeth S. Africa, Rio De Janeiro, Singapore and Perth Australia.

5. Subsea Control Fluids Water and oil based control fluids
Oceanic world leading product range.
High temperature fluids available
All with low viscosity, lubrication, biocidal and anti-corrosion properties

6. Exploration Products BOP control fluid concentrates.
Motion Compensator Hydraulic Fluids
Drilling Mud Additives

7. Erifon HD 856 100:1 BOP Fluid Concentrate.
Workhorse of the industry for over 15 years
Used by all major drilling contractors and equipment suppliers
Excellent track record
Market leader world-wide

8. Erifon HD603 Again it has all the properties in Erifon HD856
Developed to meet current and future environmental regulations
Has been tested by major valve manufacturer and approved for use in their systems.

9. Erifon HD603 HP
Again it has all the properties in Erifon HD856
Developed to provide extra lubrication and meet future environmental regulations
Has been tested by major valve manufacturer and approved for use in their systems.

10. Falex Lubricant Test

11. Erifon 603 Falex Testing No wear after 30min @ 500lb & 1%mix

12. Erifon HD603 Falex Testing

13. Galvanic Corrosion Testing

14. Environmental Testing
FULL HOCNF INFORMATION AVAILABLE IN LINE WITH PARCOM ON ALL ERIFON PRODUCTS.
ERIFON HD603 IS THE LEAST TOXIC BOP FLUID KNOWN.
SFT AND THE DTI THROUGH THE OCNS ALLOWS DISCHARGE OF ALL THE OCEANIC FLUIDS.

15. Erifon Pilot Line Fluid
Developed to prevent poor water and mixing damaging the pilot line system
Ready to use
Increases reliability

16. BOP EQUIPMENT MANUFACTURERS
MacDermid Canning are currently working with:
Cameron
Varco Shafer
Hydril

17. Erifon 818 Motion Compensator Fluid. Market leader for over 15 years
First water-based fluid to replace old phosphate ester fluids
excellent track record

18. Vapour Phase Corrosion Testing
Carbon steel plates placed over the fluid at 60°C for 1 hour

19. Vapour Phase Corrosion Testing
COMPETITOR ERIFON 818

20. Compression Ignition of Compensator fluids
HSE recommended test carried out by Bundesantalt Fur Materialprufung Germany.
Erifon 818/Compenol was the first fluid tested and was approved by the International Association of Drilling Contractors in 1986

21. Compression Ignition of Compensator fluids
Sample injection
High pressure air
Heating coils

22. Compression Ignition of Compensator fluids
Silicone Oil and Phosphate Ester fluids ignited at the above
temperatures after less than 1 second exposure.
Erifon 818/Compenol did not ignite even after 180 seconds

23. Erifon 818L Low viscosity version of Standard Erifon 818
Developed in conjunction with a major motion compensator manufacturer.
For use in cold climates

24. Erifon 818TLP
Added high pressure lubrication for Tension Leg Platforms
Required due to higher loads and different types of motion
Developed in conjunction with a major motion compensator manufacturer