1. Environmental Science Do Now 12-18-17
Take your Do Now sheet out and UNSCRAMBLE each mineral-related term.
ldios
meiarln
surtel
ogiacnnri
seidxo
6) nvetia
7) agavcele
8) ilconis
9) rastek
10) stsnoicnalie

2. Environmental Science Do Now 12-18-17
Take your Do Now sheet out and UNSCRAMBLE each mineral-related term.
ldios [SOLID]
meiarln [MINERAL]
surtel [LUSTER]
ogiacnnri [INORGANIC]
seidxo [OXIDES]
6) nvetia [NATIVE]
7) agavcele [CLEAVAGE]
8) ilconis [SILICON]
9) rastek [STREAK]
10) stsnoicnalie [NONSILICATES]

3. Reminder…Q2 Progress Report Grades will close soon!!!
Quarter 2 Progress Reports Posting Window Now Open!
The Q2 progress report posting window is open now and closes at 5pm on December 20.
I will be closing my grades on Monday, December 18, 2017 at 4 pm!!!

4. Homework – To be collected!!!
Name 5 types of ore minerals mined in the state of Maryland?

5. Objective
The student will know the types of mining practices and resources obtained from mining by taking notes, performing a close read, answering TDQs and an exit ticket.
Mastery Level:
70% or better on concept check questions

6. Mining and Mineral Resources Vocabulary Words
Native element
Ore
Ore minerals
Gangue minerals
Metallic minerals
Nonmetallic minerals
Hydrothermal solution
Evaporates
Magma
Alloy
Gemstone
Mineralization
Deposit
Subsurface mining
Room and pillar mining
Long wall mining
Solution mining
Surface mining
Open-pit mining
Overburden
Quarry
Quarrying
Aggregates
Gravel
Solar evaporation
Placer deposit
Smelting
Flux
Molten
Slag
Subsidence
Reclamation
Surface Mining Control and Reclamation Act of 1977 (SMCRA)

7. Engage
Students will watch a YouTube video called “10 Minerals More Valuable Than Gold”.
Guide Question: Name a mineral more precious than gold.
Source:

8. Explore Students will perform a close read on “Minerals”.
Annotation Points to Earn: 40 points or better [Period 5/6 will use pens/pencils instead of highlighters to underline important text.]
Source:

9. Explore – Close Read Article on Minerals
Text-Dependent Questions to Answer
1) What is the main idea of the article?
2) What are the characteristics of minerals?
3) Explain the 6 major properties of minerals.
4) Which mineral has a value of 10 on the Moh’s scale?
5) Compare and contrast silicates with non-silicates.
6) Define native element. Give 3 examples of native elements.
7) What is chromite?
8) Over 90% of the Earth’s crust is made of what type of mineral?
9) What is a gem?
10) Name the eight minerals that make up the Earth’s crust.

10. Mining and Mineral Resources
Today’s notes are worth 210 pts.
Today’s notes are worth 210 pts.
Mining and Mineral Resources

11. 16.1 Minerals and Mineral Resource
A. What is a Mineral?
Mineral is a naturally occurring, inorganic solid that has a characteristic chemical composition and physical properties.
The atoms of minerals are arranged in regular repeating geometric patterns.
Native elements are minerals made of only elements (gold, silver and copper)
Most minerals are compounds

13. B. Ore Minerals
Ore minerals are minerals that are valuable and economical (cheap) to extract.
Gangue (pronounced “gang”) minerals are minerals that have no commercial value
1. Metallic Minerals
Metals conduct electricity, have shiny services and are opaque
Valuable metallic minerals are native elements such as gold, silver and copper.
2. Nonmetallic Minerals
Nonmetals tend to be good insulators, have shiny or dull surfaces and may allow light to pass through them.
Nonmetallic minerals can be native elements or compounds.

14. B. Ore Minerals

15. C. How do Ore Minerals Form?
The types of minerals that form depend on the environment in which they form
1. Hydrothermal Solutions
Hydrothermal solutions are hot subsurface waters that contain dissolved minerals.
As they flow through cracks in rocks they dissolve minerals
New minerals crystallized out of the solutions then fill fractures to form ore deposits called veins
2. Evaporites
Water in the seas or lakes evaporates deposits of salts are left behind
Evaporates form in arid regions where rates of evaporation are high
Include rock salt and gypsum.

17. D. Mineral Resources and their Uses
Some metals can be pounded or pressed into various shapes or stretched very thinly
Some are good conductors of heat and electricity
Alloys are formed when two or more metals are combined
Nonmetals are most widely used minerals in the world
Gemstones are nonmetallic minerals prized purely for their beauty, rarity, or durability.

18. 19.2 Mineral exploration and Mining
A. Mineral Exploration
1st step in finding an ore deposit is exploring rock for mineralization.
Planes carry instruments that identify patterns in the land
2nd step rock samples are taken from the areas and analyzed to determine ore grade

19. B. Subsurface Mining
Subsurface mining is how ore deposits beneath Earth’s surface are collected.
Room-and-pillar mining is a common method used to extract coal and salt.
Networks of entries (rooms) are cut into a horizontal layer of coal.
Between each room is a pillar of coal left to support the roof.
When mining is complete the pillars of coal are removed.

20. 1. Longwall Mining
Longwall mining is a more efficient way to remove coal form a subsurface seam.
A machine (shearer) moves back and forth across the face of a coal seam.
The coal is sheared from the surface and falls on a conveyor then transported out of the mine.
2. Solution Mining
Soluble mineral ores can be removed by solution mining using very hot water.
Hot water is injected into the oar and dissolves it.
Compressed air is pumped into the dissolved ore and lifts it to the surface.

21. Concept Check Questions
1) What is a mineral?
2) What are ore minerals?
3) What are gangue minerals?
4) Explain HOW ore minerals form.
5) Describe 3 uses for mineral resources/
6) What are the two major steps in mineral exploration?
7) What is subsurface mining used for?
8) What is longwall mining used for?
9) What is solution mining?
10) In solution mining, what dissolves the minerals?

22. C. Surface Mining
Surface mining methods used when ore deposits are located close to Earth’s surface.
Open-pit mining is often used to mine large quantities of near-surface
Ore is mined downward, layer by layer.

23. 1. Surface Coal Mining
Overburden is rock that covers near-surface coal seams
1st step is to remove and set aside the soil
2nd overburden is removed by heavy equipment.
3rd loaders enter the pit and remove the exposed coal
4th once coal is removed the pit is filled with overburden, contoured and covered with the soil

24. 2. Quarrying
Building stones (granite and marble) are mined in quarries.
Aggregates (sand, gravel, and crushed rock) are the main products of quarrying.

25. 3. Solar Evaporation
Solar evaporation is the process of placing sea water into enormous shallow ponds.
Sun evaporates the water and increases the concentration of sodium chloride
This method of salt production is used in areas that receive little rainfall and have high evaporation rates.
Solar evaporation is used largely in developing countries and 30% of worlds salt comes from solar evaporation.

26. D. Placer Mining
Placer deposits are minerals that are concentrated by wind and water into surface deposits.
Streams transport mineral grains to a point where they fall to the streambed and are concentrated.
Stream placers often occur at bends in rivers where the current slows.
Gold, diamonds and other heavy minerals are mined by dredging.

27. E. Smelting
Smelting is where crushed ore is melted at high temperatures in furnaces to separate impurities from molten metal.
Flux bonds with impurities and separates them from the molten metal
Molten metal falls to the bottom of the furnace and is recovered.
The Slag (impurities)form a layer on the top
Gases (sulfur dioxide) are captured so they do not enter the environment

28. F. Undersea Mining Ocean floor contains significant mineral resources
Cost and great waters depths at which minerals are found are two reasons undersea mining has not been successful.

30. 16.3 Mining Regulations and Mine Reclamation
Because of environmental impacts of mining, it is the most heavily regulated industries in the US.
Reclaiming the land or returning it to its original condition after mining is a part of every surface coal mining operation.
A. The Environmental Impacts of Mining
Billions of dollars are spent to clean up abandoned mines.

31. 1. Air and Noise Pollution
At surface coal mines dust is produced by removing, loading, hauling and dumping soil and overburden.
Dust is also produced when ore is blasted apart
Noise is created by equipment and blasting
Most surface mines are not located near urban populations
Regulations in US forbid mining operations to allow dust or noise t exit the area being mined

32. 2. Water Contamination
Water resources can be negatively impacted by mining
Containments can wash into streams where they can harm or kill aquatic life
Minerals that contain a lot of sulfur and react with water to produce dilute sulfuric acid.

33. 3. Displacement of wildlife
Removing soil from a surface mine site strips away all plant life.
With the removal of plants animals will leave the area
When the soil is returned to the site different plants and animals may establish themselves.
Dredging disturbs river bottoms and destroys aquatic plant live.
Disturbance of a riverbed can cause sediments to contaminate a river for up to 10 km

34. 4. Erosion and Sedimentation
Excess rock from mines is dumped into large piles called dumps.
Running water erodes unprotected dumps and may harm water quality and aquatic life
5. Soil Degradation
Soil at a mine is removed from the uppermost layer downward
If soils is not removed and stored in separate layers the soil may be nutrient poor when it is reclaimed.
Soil rich in sulfur once exposed t water and oxygen release acid.
If acidified soil is returned to the mine site it may be difficult for plants to grow.

35. 6. Subsidence
Subsidence is the sinking of regions of ground with little or no horizontal movement.
Can occur when pillars in a mind collapse or the mine roof or floor fails
Buildings, houses, roads, bridges, underground pipelines and utilities may be damaged
7. Underground Mine Fires
Fires in underground coal seams are one of the most serious environmental consequences of coal mining
Lighting, forest fires and burning trash can cause coal-seams fires.
These fires are hard to put out and often left to burn out (which may take decades).
They release smoke and gasses that can cause respiratory problems.

36. B. Mining Regulation and Reclamation
Mines in US are regulated by federal and state laws
Mining company must comply with Clean Water Act and the Safe Drinking Water Act.
All mining operations must comply with the Endangered Species Act.

37. 1. Reclamation
Reclamation is the process of returning land to its original or better conditions after mining is completed.
The Surface Mining control and Reclamation Act of 1977 (SMCRA) create a program for the regulation of surface coal mining.
The act set standards that minimize the effects of coal mining on environment

38. 2. State Regulation of Mining
Mining companies must obtain permits before mining
A bond forfeiture program is where a company must post a funds (a bond) before mining project begins
The states use the funds to reclaim the sit if the company does not reclaim the site according to the standards.
State agencies are responsible for inspecting mines to ensure compliance with environmental regulations.
Pennsylvania has large projects to reclaim abandoned mine lands.

39. Extend - Concept Check Questions

40. Evaluate – Exit Ticket Question