1. Level - 3 Process Areas (CMMI-DEV)
Defined
Quantitatively
Managed
Initial
© SEI
Optimizing

2. Staged View of Process Areas : CMMI-DEV
Organizational Training
Organizational Process Definition
Organizational Process Focus
Organizational Process Performance
Project Monitoring and Control
Project Planning
Supplier Agreement Management
Requirements Management
Integrated Project Management
Risk Management
Quantitative Project Management
Requirements Development
Technical Solution
Product Integration
Verification
Validation
Organizational Performance Management
Configuration Management
Process & Product QA
Measurement & Analysis
Decision Analysis & Resolution
Causal Analysis & Resolution
Engineering
Project Management
Process Management
Support 2 3 4 5

3. Requirements Development
The purpose of Requirements Development is to produce and analyze customer, product, and product-component requirements.

4. Requirements Development
There are 3 specific goals in the process area -
Develop Customer Requirements(SG1)
Develop Product Requirements (SG2)
Analyze and Validate Requirements(SG3)

5. Requirements Development
Elicit Needs SP
1.1
Transform Stakeholder Needs
into Customer Requirements SP
1.2
Requirements
SG1: Develop Customer Requirements

6. Requirements Development
Establish Product &
Product Component Requirements SP
2.1
Allocate Product Component
Requirements
2.2
Allocated
Requirements
Identify Interface Requirements SP
2.3
SG2: Develop Product Requirements

7. Requirements Development
Establish Operational
Concepts and Scenarios SP
3.1
Establish a Definition of
Required Functionality &
Quality Atttributes
3.2
Analyze Requirements
3.3
Validate Requirements
3.5
Analyze Requirements to
achieve Balance
3.4
SG3: Analyze and Validate Requirements

8. Technical Solution

9. Technical Solution
The purpose of Technical Solution is to design, develop, and implement solutions to requirements. Solutions, designs, and implementations encompass products, product components, and product-related life-cycle processes either singly or in combinations as appropriate.

10. There are 3 specific goals in the process area -
Technical Solution
There are 3 specific goals in the process area -
Select Product-Component Solutions(SG1)
Develop the Design(SG2)
Implement the Product Design(SG3)

11. Technical Solution SG1: Select Product-Component Solutions
Develop Alternative
Solutions & Selection Criteria SP
1.1
Select Product
Component Solutions SP
1.2
SG1: Select Product-Component Solutions

12. ? Technical Solution SG2: Develop the Design Design the Product or
Product Component SP
2.1
Establish a Technical Data Package
2.2
Design Interfaces using
Criteria SP
2.3 ?
Perform Make, Buy,
or Reuse Analyses SP
2.4
SG2: Develop the Design

13. Technical Solution SG3: Implement the Product Design
Implement the Design SP
3.1
Develop Product
Support Documentation SP
3.2
SG3: Implement the Product Design

14. Product Integration

15. Product Integration
The purpose of Product Integration is to assemble the product from the product components, ensure that the product, as integrated, functions properly, and deliver the product.
This process area addresses the integration of product components into more complex product components or into complete products.

16. There are 3 specific goals in the process area -
Product Integration
There are 3 specific goals in the process area -
Prepare for Product Integration(SG1)
Ensure Interface Compatibility(SG2)
SG 3 Assemble Product Components and Deliver the Product (SG3)

17. Product Integration SG1: Prepare for Product Integration
Establish an Integration
Strategy SP
1.1
Establish the Product
Integration Environment SP
1.2
Establish Product Integration
Procedures and Criteria SP
1.3
SG1: Prepare for Product Integration

18. Product Integration SG2: Ensure Interface Compatibility
Review Interface Descriptions
for Completeness SP
2.1
Manage Interfaces
2.2
SG2: Ensure Interface Compatibility

19. Product Integration
Confirm Readiness of
Product Components for Integration SP
3.1
Assemble Product
Components
3.2
Evaluate Assembled
Product Components
3.3
Package and Deliver
the Product or Product Component
3.4
SG3: Assemble Product Components and Deliver the Product

20. Verification

21. Verification
The purpose of Verification is to ensure that selected work products meet their specified requirements.
Verification includes verification of the product and intermediate work products against all selected requirements, including customer, product, and product component requirements
The Verification process area involves the following: verification preparation, verification performance, and identification of corrective action.

22. There are 3 specific goals in the process area -
Verification
There are 3 specific goals in the process area -
Prepare for Verification(SG1)
Perform Peer Reviews(SG2)
Verify Selected Work Products (SG3)

23. Verification SG1: Prepare for Verification SP
Select Work Products for Verification SP
1.1
Establish the Verification Environment SP
1.2
Establish Verification Procedures and Criteria SP
1.3 QC
Plan
SG1: Prepare for Verification

24. Verification SG2: Perform Peer Reviews SP Prepare for Peer Reviews 2.1
Plan
Conduct Peer Reviews SP
2.2
Analyze Peer Review Data SP
2.3
SG2: Perform Peer Reviews

25. Verification SG3: Verify Selected Work Products SP
Perform Verification SP
3.1
Analyze Verification Results SP
3.2
Test
Reports
SG3: Verify Selected Work Products

26. Validation

27. Validation
The purpose of Validation is to demonstrate that a product or product component fulfills its intended use when placed in its intended environment.
Validation demonstrates that the product, as provided, will fulfill its intended use; whereas, verification addresses whether the work product properly reflects the specified requirements. In other words, verification ensures that “you built it right”; whereas, validation ensures that “you built the right thing.” Validation activities use approaches similar to verification (e.g., test, analysis, inspection, demonstration, simulation).

28. There are 2 specific goals in the process area -
Validation
There are 2 specific goals in the process area -
Prepare for Validation(SG1)
Validate Product or Product Components(SG2)

29. Validation SG1: Prepare for Validation Select Products for ValidationSP
1.1
Establish the Validation
Environment SP
1.2
Define Validation
Procedures and Criteria SP
1.3
SG1: Prepare for Validation

30. Validation SG2: Validate Product or Product Components
Perform Validation SP
2.1
Analyze Validation
Results SP
2.2
SG2: Validate Product or Product Components

31. Questions