1. Indoor GPON ONT
September 2010

2. MXK 819 MXK 319 MXK OLT Bezel with Fan Assembly & Status LEDs
Redundant Controllers + Uplinks
Eight 1G Ports (SFP)
Dual 10G Ports
GPON Line Card 4- or 8-port
Active Ethernet Line Card
Fiber Tray & Management
MXK is the new addition to the SLMS product family
MXK is a complete non-blocking platform with the initial switching fabric is 400 Gbps
The architecture is scalable: The chassis solution can provide 10 Gigs to 100Gigs of data traffic through the box. There are dedicated 10Gig backplane from each line card to the uplink card. This provides a non-blocking architecture. So as you add more end-users, or as applications have higher requirements of bandwidth or as end-users requirements start increasing, the architecture easily scales. The chassis need not change
MXK is designed with the future in mind, optimized for high bandwidth applications. In the first release, MXK supports both fiber technologies, Active Ethernet and GPON. Both the solutions are standards based. MXK as we discussed above, is non-blocking, scalable which are requirements for high bandwidth applications. The switching fabric has a dedicated 10Gig to uplink card, packet based transmission. The uplink card has 2 10Gig interfaces and a 8 1Gig interfaces. So your chassis is never the bottleneck
MXK is designed for improving Quality of Experience of end-users. The system was designed in such a way it can be achieved, for example, the non-blocking architecture enables high bandwidth applications which provides end-user the services they want. Example in a triple play environment when they are watching IPTV, there is no stalled frames, downloading video is faster, Quality is provided for voice. This is the intelligence of the MXK. The software provides the intelligence.
MXK provides the service provider the ability to provision, police, monitor end-users. This MXK provides the ability to handle terabits of bandwidth, link and site redundancy, security, reliability, ease of manageability and application support.
Reliability: MXK provides Active/Standby support of uplink cards, Link Aggregation that can be used for reliability as well.
Manageability: MXK is part of the SLMS family. It’s the same as SLMS family, ZMS for efficient OSS integration at large scale and WebUI for ease of use at the outset or at smaller scales and CLI support which is similar to the other SLMS products. Consistent across other products
Flexibility: Choice of Technology: Support new fiber technologies (GPON and Active Ethernet), Legacy technologies (Copper, ADSL2+ in the future). Interfaces: Any service in any slot, hot swappable
MXK interoperates with indoor and outdoor ONTs. Zhone has own zNIDs.
Power & Alarms Cable Entry
Removable Fan Assembly with Status LEDs
MXK 319
Redundant Controllers + Uplinks

3. zNIDs for SFU/SBU Applications3

4. Indoor GPON ONT Common Features
All indoor ONT are compliant with ITU-T G.984 and use OMCI for management
Fiber “door” protects the fiber connector from being handled by the subscriber
Wall mounting is possible with key holes on bottom of the unit
Line rate bridging is supported on all models

5. zNID-GPON-25xx Interfaces Packet Handling Management
Up to 4 POTS – SIP or H.248
Up to 4 FE or GE LAN ports
GPON uplink
RF Video support
WiFi
Packet Handling
IGMP Snooping / IP Video support
Wire-speed bridging
PPPoE Client
QoS, VLANs, Rate Limiting
Q-in-Q
Management
ZMS support
OMCI
Physical / Environmental
Desk or wall mount
0C to +40C

6. 2516/2517 WiFi Residential Gateway
Interfaces
2 POTS – SIP or H.248
4 GE LAN ports
GPON uplink
Optional RF Video support
WiFi b/g/n
Packet Handling
IGMP Snooping / IP Video support
Wire-speed bridging
PPPoE Client
QoS, VLANs, Rate Limiting
Q-in-Q
Management
ZMS support
OMCI
Physical / Environmental
Desk or wall mount
Fiber tray
0C to +40C

7. zNID-GPON-51xx Interfaces Packet Handling Management
2 POTS – SIP or H.248
4 GE LAN ports
GPON uplink
4x or 8x T1/E1
Packet Handling
IGMP Snooping / IP Video support
Wire-speed bridging
PPPoE Client
QoS, VLANs, Rate Limiting
Q-in-Q
Management
ZMS support
OMCI
Physical / Environmental
Fiber tray
0C to +40C

8. zNID-GPON-8xxx Interfaces Packet Handling Management
24 POTS – SIP or H.248
24 FE LAN ports
GPON uplink
Packet Handling
IGMP Snooping / IP Video support
Wire-speed bridging
QoS, VLANs, Rate Limiting
Q-in-Q
Management
ZMS support
OMCI
Physical / Environmental
Rack mount
0C to +40C
AC powered

9. MDU Sample Configuration Options
8324 can function as a 4 port ONT for 6 subscribers. This example shows each subscriber with 4 phone lines, three IPTV connections, and one data connection. P
Eth P
Eth P
Eth P
Eth P
Eth P
Eth P
Eth P
Eth P
Eth
8224 can service 24 subscribers when all services are trunked through to each Ethernet port. Each subscriber has a Residential Gateway to separate services inside the home.
Eth
Eth
Eth
Eth
Eth
Eth
Eth
Eth
Eth RG RG RG RG RG RG RG RG RG

10. Residential Gateway Support
The 2510A/2511/2520 can support Residential Gateway functions
PPPoE, Static IP, DHCP IP on the WAN
NAT/PAT
DHCP server hands out IP addresses to the LAN
Use one Ethernet port as RG and the other ports for bridging
PC’s connected to Ethernet port 1 will use ONT as a RG
STB’s connected to Ethernet ports 2-4 participate in bridged video
The 2516 with WiFi also has Residential Gateway support tied into the wireless service.

11. Registration ID
The default method of registering an ONT with the MXK is using the serial number of the ONT.
Serial number is unique to the ONT
OLT is pre-configured to recognize the ONT by the serial number and that serial number is used to configure the ONT.
An alternate method of registering the ONT is to use a Registration ID
The Registration ID is unique to the subscriber
The Reg ID is programmed into the ONT at the time of installation
OLT is pre-configured to recognize the ONT by the Red ID and that Reg ID is used to configure the ONT.
Advantage: Any ONT can be pulled off of the truck for a replacement. The new ONT is programmed with the Reg ID and is configured by the OLT. No intervention by the NOC is necessary for a unit swap.

12. Battery Backup Unit
Zhone offers a battery backup unit with integrated alarms
This battery backup unit draws AC power from the premises and connects to the ONT providing power and optionally also providing alarms.
Cables are available for each power input option so that any indoor ONT can be powered by a UPS if required.
Zhone has qualified battery backup unit from CyberPower for such applications. 7.2AH battery. 12

13. Indoor GPON Model Matrix

14. Thank you!