2. Accessible Pedestrian Signal Features New possibilities for access in the US Janet M. Barlow Accessible Design for the Blind Asheville, North Carolina

3. 4/4/2008Accessible Design for the Blind Slide 2

4. Old types of audible signals = loudspeakers mounted on pedestrian signal heads 4/4/2008Accessible Design for the Blind Slide 3

5. Pedhead-mounted APS problems Too loud – mask vehicular sounds that blind pedestrians want to hear Too loud – mask vehicular sounds that blind pedestrians want to hear Too loud – bother neighbors Too loud – bother neighbors Confusing – users have to know what direction they’re facing to figure out which street the signal is indicating Confusing – users have to know what direction they’re facing to figure out which street the signal is indicating Confusing – users not sure if sound is APS or bird (for cuckoo/chirp signals) Confusing – users not sure if sound is APS or bird (for cuckoo/chirp signals) 4/4/2008Accessible Design for the Blind Slide 4

6. Pushbutton-integrated Accessible Pedestrian Signals (APS) NOT cuckoos and chirps from pedheads! 4/4/2008Accessible Design for the Blind Slide 5

7. Pushbutton-integrated APS Continuous pushbutton locator tone with rapid tick WALK indication 4/4/2008Accessible Design for the BlindSlide 6 Sounds attached; click on photo to hear sounds

8. Pushbutton- integrated APS Continuous pushbutton locator tone followed with speech walk indication Continuous pushbutton locator tone followed with speech walk indication 4/4/2008Accessible Design for the Blind Slide 7 Sounds attached; click on photo to hear sounds

9. Features Following slides explain each feature Following slides explain each feature  Speaker at the pushbutton  Pushbutton locator tone  Tactile arrow  Audible and vibrotactile walk indications  Locator tone and walk indication volume adjusts in response to ambient noise levels  Audible beaconing on “request” (by holding pushbutton for over 1 second) 4/4/2008Accessible Design for the Blind Slide 8

10. Speakers at the pushbutton 4/4/2008 Slide 9 Accessible Design for the Blind

11. Pushbutton Locator Tone Sound comes from the pushbutton Sound comes from the pushbutton Provides information about pushbutton presence and location Provides information about pushbutton presence and location 1 tone per second, each tone less than 0.15 seconds in duration 1 tone per second, each tone less than 0.15 seconds in duration Volume set to be heard within 6 – 12 feet, or at the building line, whichever is less Volume set to be heard within 6 – 12 feet, or at the building line, whichever is less Different sounds acceptable (click, beep, etc) Different sounds acceptable (click, beep, etc) 4/4/2008Accessible Design for the Blind Slide 10

12. Tactile arrow Raised arrow aligned with direction of travel on the crosswalk controlled by the pushbutton Raised arrow aligned with direction of travel on the crosswalk controlled by the pushbutton Arrow may be on the pushbutton or on part of the device or sign above the pushbutton Arrow may be on the pushbutton or on part of the device or sign above the pushbutton 4/4/2008Accessible Design for the Blind Slide 11

13. Tactile Arrow – examples 4/4/2008Slide 12Accessible Design for the Blind

14. Recommended WALK indications A rapid tick WALK indication (sound on slide 6) at locations where the speakers for APS for two different crosswalks are separated by at least 10 feet A rapid tick WALK indication (sound on slide 6) at locations where the speakers for APS for two different crosswalks are separated by at least 10 feet Vibrotactile WALK indication - arrow (or other surface on pushbutton unit) that vibrates during WALK Vibrotactile WALK indication - arrow (or other surface on pushbutton unit) that vibrates during WALK 4/4/2008Accessible Design for the Blind Slide 13

15. Volume adjustment  Relatively quiet unless audible beaconing is called  Volume only 2-5dB over ambient noise level  Audible within 6 - 12 feet of the pushbutton, or the building line, whichever is closer 4/4/2008Accessible Design for the Blind Slide 14

16. Automatic volume adjustment Volume of pushbutton locator tone and audible walk indications adjusts in response to ambient sound Volume of pushbutton locator tone and audible walk indications adjusts in response to ambient sound  Louder when traffic is loud or there is other noise at the intersection  Quiet when traffic or other sounds are quieter (night) 4/4/2008Accessible Design for the Blind Slide 15

17. APS Location is critical Provide information to the user through proximity to the departure point Provide information to the user through proximity to the departure point Impose less of a cognitive load on pedestrians who are visually impaired Impose less of a cognitive load on pedestrians who are visually impaired  ‘I have pushed the button on my right’  ‘The WALK indication is coming from my right’  ‘That sound is for my crosswalk’ Signal can be quieter due to proximity Signal can be quieter due to proximity 4/4/2008Accessible Design for the Blind Slide 16

18. Installation recommendations Beside the landing of the curb ramp Separated by more than 10 feet from other APS on corner MUTCD says within 5 feet of crosswalk line and within 10 feet of the curb 4/4/2008Accessible Design for the BlindSlide 17

19. Installation Example Near departure point Near departure point Poles separated by more than 10 feet Poles separated by more than 10 feet Low sound intensities Low sound intensities Vibrotactile available Vibrotactile available 4/4/2008Accessible Design for the Blind Slide 18

20. Pushbutton within five feet of crosswalk line extended 4/4/2008Accessible Design for the Blind Slide 19 < 5 feet

21. Pushbutton within 10 feet of the curb 4/4/2008Accessible Design for the Blind Slide 20 < 10 feet

22. Installation example - APS separated by 10 feet (3m) Reachable from level landing, within 10 ft of curb, within 5 feet of crosswalk lines 4/4/2008Accessible Design for the Blind Slide 21

23. Installation example - APS aligned with crosswalk lines 4/4/2008Accessible Design for the Blind Slide 22

24. IF it’s impossible to install two poles 10 feet apart (in alterations, not new construction) Two APS may be placed on same pole, or closer than 10 feet, BUT additional features are required Two APS may be placed on same pole, or closer than 10 feet, BUT additional features are required Use speech message WALK indication, and, to clarify message, Use speech message WALK indication, and, to clarify message,  Pushbutton information message  Tactile arrow 4/4/2008Accessible Design for the Blind Slide 23

25. Pushbutton information message Pushbutton message to provide intersection information Plays when pushbutton is pressed for 1 second or more 4/4/2008 Accessible Design for the BlindSlide 24 Click on photo to hear message

26. Pushbutton information message and speech walk message example 4/4/2008Accessible Design for the Blind Slide 25

27. Audible beaconing Sound from the opposite side of the street is used to provide directional guidance during street crossing Sound from the opposite side of the street is used to provide directional guidance during street crossing Provided after pedestrian holds the pushbutton in for over one second to call the audible beaconing Provided after pedestrian holds the pushbutton in for over one second to call the audible beaconing Walk tone and the subsequent locator tone increased in volume during the next signal cycle Walk tone and the subsequent locator tone increased in volume during the next signal cycle 4/4/2008Accessible Design for the Blind Slide 26

28. Additional possible feature: Crosswalk Map Tactile map of crosswalk  Symbols (from bottom of picture) for:  down curb,  bike lane  2 lanes of cars from left  Island  rail line  2 lanes of cars from right  up curb 4/4/2008Accessible Design for the BlindSlide 27

29. Thanks to: Lukas Franck of The Seeing Eye, and Billie Louise Bentzen of Accessible Design for the Blind for photos and assistance in development Lukas Franck of The Seeing Eye, and Billie Louise Bentzen of Accessible Design for the Blind for photos and assistance in development John McGaffey from Polara Engineering, Roger Peterson from Prismatek, Doug Gubbe from Novax, for photos and sounds John McGaffey from Polara Engineering, Roger Peterson from Prismatek, Doug Gubbe from Novax, for photos and sounds Doug Barlow for technical help Doug Barlow for technical help Lois Thibault, US Access Board, for feedback and suggestions Lois Thibault, US Access Board, for feedback and suggestions 4/4/2008Accessible Design for the Blind Slide 28

30. For more information, contact: Janet M. Barlow Accessible Design for the Blind 3 Manila Street Asheville, NC 28806 770-317-0611jmbarlow@accessforblind.org