1. Mrs. RESHMA RAJ AP/CIVIL ENGINEERING DEPARTMENT OF SCD

2. FLOORING, ROOFING AND CEILING

3. FLOORING, ROOFING AND CEILING
Keep the diagram in floor plan level 1
Select floor from main tool bar – select the required shape – now draw wherever the floor is required – finish off – now view in 3D.
To edit the floor – select the floor from 3D view – go to edit type – and make the duplicate of it by changing the name as floor – now in edit – change the thickness of floor as 6” – add floor material from by category if needed such as tile work.
RESHMA RAJ FLOORING, ROOFING AND CEILING
24/7/2017

4. FLOORING, ROOFING AND CEILING
We can move and can extend the dimension of the floor by just clicking it directly. Make every changes by placing the diagram in top view.
Provide flooring for every other stories except the last storey.
RESHMA RAJ FLOORING, ROOFING AND CEILING
24/7/2017

5. FLOORING, ROOFING AND CEILING
Keep the diagram in floor plan level 2
Select roof from main tool bar – now draw wherever the roof is required – provide defined slope on 4 sides or 3 sides or 2 sides or 1 side as per our required design - finish off – now view in 3D.
To edit the roof– select the roof from 3D view – go to edit type – and make the duplicate of it by changing the name as roof – now in edit – change the thickness of roof as 6” – add roof material from by category if needed such as asbestoses work.
We can move and can extend the dimension of the roof by just clicking it directly. Make every changes by placing the diagram in top view.
RESHMA RAJ FLOORING, ROOFING AND CEILING
24/7/2017

6. FLOORING, ROOFING AND CEILING
After making the roof – attach wall and column to roof.
CEILING:
Keep the diagram in floor plan level 1
Select ceiling from main tool bar – select the required shape – now draw wherever the ceiling is required – finish off – now view in 3D.
To edit the ceiling– select the ceiling from 3D view – go to edit type – and make the duplicate of it by changing the name as ceiling – now in edit – change the thickness of ceiling as 6” – add ceiling material from by category if needed such as tile work.
RESHMA RAJ FLOORING, ROOFING AND CEILING
24/7/2017

7. FLOORING, ROOFING AND CEILING
For editing work – select the ceiling – edit profile – select the required shape – draw it in the ceiling by placing the diagram in top view – now finish off – the edit opening can be seen in the ceiling.
RESHMA RAJ FLOORING, ROOFING AND CEILING
24/7/2017

8. FLOORING, ROOFING AND CEILING
THANK YOU
RESHMA RAJ FLOORING, ROOFING AND CEILING
24/7/2017