1. Click the " New Job "

2. 3. Click " Save "
1. Select Material
2. Select Machine

3. Click the " Import. STL files "

4. 2. Click " Open "
1. Select Type Object

5. Tip.
If you want, you can click here to check the STL file.

6. Click the " Select Machining Stratigies "

7. 1. Select Machining Stratigies
2. Click " Open "

8. Tip.
Always click " OK "

9. Click the " Select or Create Stock / Blank "

10. 1. Select Stock / Blank directory
2. Click " Open "

11. 1. Select Implant System
Tip.
Be sure to check
the designed implant system.
2. Click " Open "

12. Tip.
Be sure to import the blank
and check the hex position.

13. Tip.
Parallel relationship for check the hex position.

14. Tip.
Click the
" Modified Offset / Part Border values "

15. 1. Click Abutment
2. Click " End Selection "

16. Changed to " 2.5mm "
4.4mm
2. Click " OK "

17. 2.5mm
Tip.
Since the offset value is reduced, the total milling time is also reduced.

18. Click the
" Start Calculation for Machining "

19. Click "OK "

20. Tool path computing…

21. 1. Add the file name to easily find " NC-data "
[Patient name/Tooth number/ Other information]
2. Click "OK"

22. Click " Yes "