2. Replacement Elements for Baghouse and Cartridge Collectors
Dura-PleatTM
Replacement Elements for Baghouse and Cartridge Collectors
> Press spacebar to advance each slide, or ESC to stop the presentation.

3. In the beginning...
>

4. Well, not all that long ago…
A lot of folks thought the cartridge type dust collector would replace the pulse jet bag house --
>

5. Because: Bag house is: Cartridge is: too difficult to service too tall
Dura-Pleat
Because:
Bag house is:
too difficult to service
too tall
too high on energy demand
not very efficient
too expensive to install
Cartridge is:
easy to service
much shorter
low on energy demand
very efficient
>

6. But the Cartridge collector was not able to handle many of
Dura-Pleat
But the Cartridge collector was
not able to handle many of
the “tough” applications, like:
High temperature
Very high dust concentration
Oily presence in challenge dust
>

7. …and you can guess the rest…
The Cartridge collector did not replace the bag house!
>

8. problem applications But the still existed! High temperature
Very high dust concentration
Oily presence in challenge dust
and a lot more as well…...
>

9. A SOLUTION
was still needed!
>

10. What appeared in the market place was a new media -- initially for Cartridge elements -- that was also applicable to the bag house...
100% spun bond polyester.
>

11. The cartridge survived.
Bottom line?
The bag house survived.
The cartridge survived.
Result?: the hybrid bag house.
>

12. Welcome to the Dura-PleatTM element - for replacement & Ramtube© collectors...
The hybrid bag house use elements quite similar to the cartridge dust collector:
Cartridge: ~12” dia x 20”-39” long
Hybrid element: 4”-6” dia x 21”-80”+ long
>

13. Dura-PleatTM hybrid features:
Retro-fit to existing; no change to housing
New-fit to shorter housing
One piece design, integral bag+cage; reduced install/service time
Filter surface area increased 2-3 times; lower a/m ratio
Resilient urethane top ensures superior fit; air tight seal
Specialty finishes available; PTFE, static dissipation, oil/water repellant
Surface filtration reduces operating pressure; lower energy demand [Hp]
>

14. Dura-PleatTM hybrid features:
Less compressed air to pulse than conventional bag
Shorter length keep media out of inlet gas stream; reduces chance of abrasion
Shorter length + shorter housing has cost advantage; fits constrained spaces, enables max flow in smaller housing, reduced shipping cost
Media is 100% spun bond polyester with 99.99% efficiency; emissions reduced by half of standard polyester media
Dura-PleatTM will operate at 1800 F continuous; 3500 F with special media
Plus all the better features & benefits of the conventional bag house!
>

15. Dura-Pleat
>

16. Dura-Pleat
>

17. Dura-Pleat
>

18. Dura-Pleat
>

19. Dura-Pleat
>

20. Dura-Pleat
>

21. Dura-Pleat
>

22. Dura-PleatTM Filter Benefits:
Meets widest range of tough application challenges -- handles difficult dust
Provides easy-to-install replacement for bag or cartridge filters
Improves performance of older collectors -- simply drops in with no modifications required
Allows downsizing of new collectors; saves floor space
Achieves lowest emissions
Washable media may reused in many applications
Exceptionally rugged, long lasting
Standard configuration is non-metallic for ease of disposal or incineration
Reduces downtime for lower maintenance and change-out costs
Often pays for itself in enhanced performance and longer service life!
>

23. Dura-Pleat
>

24. Dura-Pleat
>

25. Dura-Pleat
>

26. Dura-Pleat
>

27. Thank You