1. TRAINING FOR VIDYALAYA LEVEL
KVS ZIET MYSORE
TRAINING FOR VIDYALAYA LEVEL
CCE MENTORS-
Primary Level
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.
What.. Why.. And How..

2. Definition of Portfolio
According to Stiggins (2001),
“a portfolio should tell the story of a student.”
Through the portfolio processes of collecting, selecting, organizing and reflecting, an individual is actively involved in constructing the story of her/himself as a student.
The artefacts included in the portfolio demonstrate what that student knows and can do. These artefacts, collected over time, will provide an on going record of the student's accomplishments
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

3. Portfolio – CBSE Manual on CCE PLEASE CLICK ON THE FILE TO OPEN
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.
PLEASE CLICK ON THE FILE TO OPEN

4. Uses of a Portfolio to promote student control of learning
• to track student progress
• to demonstrate individual growth
• to respond to individual needs
• to evaluate and report on student progress
• to facilitate student-led conferences
• to show process and product
• to show final products
• to show student achievement with respect to specific curricular goals
• to document achievement for alternative grading
• to accumulate "best work"
• for developing skills of organizing and independent effort
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

5. PARTS OF A PORTFOLIO
Establish a minimum set of elements for each portfolio.
Cover
Title page
Table of contents
Page numbers
Conclusion or reflection statement
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

6. SAMPLES IN A PORTFOLIO
Are there certain things you want included in each sample? What must minimally accompany each sample?
Title
Student assessment of the sample’s value or purpose
What student learned
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

7. Principles that guide the use of Portfolios as an Assessment Tool
is continuous and ongoing--the value of a portfolio is its ability to show development over time.
is multidimensional--the portfolio should contain a wide variety of artifacts demonstrating a number of different learning processes and a variety of different assessment tools.
is selective--it is selecting artifacts for inclusion in the portfolio that is valuable, not the collecting alone.
is reflective--it is through the process of reflection that students come to understand themselves as learners. Reflection is essential to the use of the portfolio in supporting learning.
has clearly defined criteria--the criteria for the selection of artifacts and for assessing the portfolio must be clearly understood by the teacher and the students from the beginning of the process (Chriest & Maher, 2003; Wolf & Sui-Runyan, 1996).
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

8. A Portfolio can showcase……
Multidimensional
A Portfolio can showcase……
Art
Language experience dictations
Written reports
First drafts and revised writing
Math samples
Written personal response
Reading or writing logs
Journal entries
Activity reports
Group reports or projects
Self-evaluations and reflections
Photographs of three dimensional products or performance based activities
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

9. Selective A Portfolio can showcase……
General Type
Is there a general type of sample that you would like students to include in their portfolio .For ex-the best work
Think of the traits you hope students will be encouraged to include in their portfolio?
May include work related to demonstrate for example:
Critical /CREATIVE thinking
Problem-solving
Computing
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

10. REFLECTIVE-ILLUSTRATIONS OF STUDENT
REFLECTIONS
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

11. Clearly defined Criteria-
Grading Portfolios
How will you grade the portfolio effort?
The entire product will be graded using a rubric spelling out criteria for appearance and completeness
Selected samples showing evidence of learning/skill will be graded individually
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

12. Grading Periodicity
Do you want to give one all-or-nothing grade at the end, or
use a process of grading in progressive steps toward completion?
Examples:
Earning points along the way for turning in 10 work samples
Completing an outline
Creating an entire package
Making a presentation
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

13. Frequency
How often should students be expected to add to their portfolio?
Weekly
Monthly
Quarterly
Yearly
Other
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

14. Storage
Who is responsible for storing portfolios? Where will this be done?
Be strong enough to withstand a whole year’s use
Occupy no more classroom space than is comfortably available in most classrooms
Be low cost
Be readily accessible to students so the portfolios can be a natural part of daily classroom activities
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

15. Work Time - How Often? One period or hour per day
How much time should students be given to work on their portfolio in school?
One period or hour per day
One period or hour per week
One period or hour per month
Other

16. Presentation and Celebration
Showcasing-
Presentation and Celebration
If you choose to have a presentation of portfolios, what kind would you like to see?
Parent and teacher conference
Peers or class review
Teacher/student interview

17. Practical Considerations Applicable to the KV Set up
Parameters for implementation can be chalked out in subject committees for uniformity and clarity
Though several ideas have been given a simple structure and criteria could benefit all students
No Bag Day could be used to work with student Portfolios in a collaborative way with the Teacher
Teachers taking two or more subjects in a class may maintain one Portfolio since it is an integrated curriculum