1. Your ESD Flooring Solution Provider
VERSION

2. Who is Statguard Flooring?
Statguard Flooring is a division of Desco Industries. We have a full line of ESD Flooring solutions that meet the recommended technical flooring requirements of ANSI/ESD S
Our full line of flooring products includes:
8400 Series ESD Vinyl Floor Tile and Conductive Adhesive
Statguard® Conductive Epoxy and Acrylic Paint
Statguard® Dissipative Floor Finish and ESD Floor Maintenance Products
Conductive Rubber Tiles and Rolls
Dissipative Modular Carpet Tiles

3. Applications
Statguard Flooring products are designed for areas that require static control, such as:
ESD Electronic Assembly and Manufacturing areas
ESD Testing and R & D Labs
Computer Rooms, Control Rooms, and Main Frame Areas
911 Call Center and Communication Areas
FAA Air Traffic Control Towers, TRACON, and Radar Surveillance Areas
Telecommunication facilities
Hospital diagnostic units

4. Trusted by Leading Companies
Our growing list of customers who have purchased our ESD floor covering for permanently safeguarding their ESD problems include:
Boeing
Jabil
Raytheon
Keysight
Alchem
Surmotech
QSR Automation
Omron
Teledyne
US Navy
Jabil
Rorer Management

5. Floor Care Products Made in USA
We take pride in manufacturing our products right here in the United States of America
We offer tours at our facility in Canton, Massachusetts

6. What is ESD? Many common materials tribocharge
Electrostatic charge generation:
When two surfaces are in contact then separate
One surface has positive charge and one surface has negative charge
Personnel can generate a charge by walking on a non ESD floor

7. What is ESD? Large charges generated all the time
Walking across a carpet:
1,500 – 35,000 volts
Walking over many types of untreated floor surfaces:
250 – 12,000 volts

8. What is ESD?
Charged personnel can cause ESD damage to static sensitive components
Use of Statguard Flooring options and proper use of ESD Footwear will eliminate ESD damage to static sensitive components

9. ESD Vinyl Tile Conductive - Electrical Resistance: < 1 x 106 ohms
Dissipative - Electrical Resistance: 1 x 106 to < 1 x 109 ohms
12” x 12”, 24” x 24”, 36” x 36”
Thickness: 2.0mm or 3.2mm
Lifetime electrical warranties and certified testing
Ten year limited wear warranty
Color extends throughout the tile
Meets ANSI/ESD S flooring required limit tested per ANSI/ESD STM7.1 and ESD TR53, and is suitable flooring component for personnel grounding Footwear / Flooring System.

10. Statguard Epoxy
Conductive - 1 x 104 to < 1 x 107 ohms per ANSI/ESD STM7.1 or IEC
Statguard® Conductive Epoxy provides superior static control and durability.
Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear.
ESD Epoxy meets ANSI/ESD S as tested per ESD S7.1.
One Coat, 2-part, Water-Based Epoxy System
Statguard Flooring expressly warrants that for a period of 5 years after the date of installation that our Statguard® Conductive Epoxy, when properly installed and maintained, will meet its published electrical specs under normal foot traffic and until mechanically removed or worn away.
Made in America

11. ESD Rubber Tile
Ideal for installation in Clean Room & Electronic Manufacturing Facilities
Multi-colored and slip resistant
Sound absorbent
High durability compound
Flexible and resilient
Resistant to oil and grease
Easy Maintenance
Meets the required limits of ANSI/ESD S for ESD flooring < 1 x 109 ohms

12. ESD Carpet Tile World class manufacturing environment
Ease of maintenance
Lifetime electrical properties
Sound absorbent
Anti fatigue properties
Ease of repair / replacement
Direct traffic pattern
Meets the required limits of ANSI/ESD S for ESD flooring < 1 x 109 ohms

13. Conductive Adhesive NEW! 8453 Solvent-Free Conductive Epoxy Adhesive
Two-part urethane flooring adhesive with low volatile organic compounds (VOCs) for the 8400 Series ESD Vinyl Floor Tile
Conductive Vinyl Tile Adhesive, Two-Part Epoxy
Two-part component conductive epoxy adhesives of syrupy consistency. It is formulated to bond where high performance, interior installation is required.
Part Conductive Epoxy Adhesive, 135 Sq. Ft. Coverage, Standard Pack
High solids, 2-part Epoxy Adhesive provides an efficient electrical ground plane underneath the entire floor to drain electrostatic charges to ground.

14. Grounding Strips & Weld Rods
Copper Foil Ground Strip
2” x 24” - Multiple ground options to building ground or electrical outlets
Rubber Weld Rod
Permanently closes seams between Statguard Flooring ESD Rubber Tiles & Rolls

15. Static Dissipative Floor Finish and Floor Care Maintenance Products
FEATURES AND BENEFITS
APPLICATION
TESTING
MAINTENANCE

16. Why Use Statguard® Floor Finish?
Static dissipative. Rtt = 107 – < 1 X 109 Ohms through 10% - 65% RH
Charge decay to zero volts from 5,000 volts in .01 seconds
Low Tribocharging, will not generate greater than 100 volts even under 10% RH
High performance proprietary X-linked polymers for hardness and durability
UL listed for slip resistance, high coefficient of friction
Non-water whitening
Used in clean rooms down to class 1,000
30 years performance history with Statguard®
18% Solids (Standard Statguard® Floor Finish)
23% Solids (Low-VOC Statguard® Floor Finish)

17. Statguard® Floor Finish
Low humidity formulation provides greater durability and performance in all humidity environments
Dissipative 1 x 106 to < 1 x 1010 ohms per ANSI/ESD STM7.1 and ESD TR53) and low tribocharging (<100 volts per ANSI/ESD STM97.2)
Cross-linked polymer produces a glossy, long lasting, durable finish for a beautiful ESD floor finish that stands up to heavy traffic but is easier to strip
UL classified for slip resistance
18% solids for easy application; improves productivity
Lead-free RoHS, REACH, and Conflict Minerals compliant
Responds well to spray buffing and dry burnishing to restore electrical properties and luster with minimal labor
Made in the United States of America
Part No.
Gallons
46000
2.5 Gal Box
46001
5 Gal Box
46003
55 Gallons

18. Statguard® Low-VOC Floor Finish
Better Hardness vs. Leading Competition – ASTM Standard D Resists wear in order to maintain ESD performance longer
Static Dissipative Zinc Free Floor Finish
Convert hard non-ESD floors to ESD protective flooring
Protect and enhance ESD permanent flooring (Vinyl, VCT, Rubber)
Low-VOC - Meets CARB and other regional VOC requirements
Dissipative Coating - (1 x 107 to < 1 x 109 ohms) - ANSI/ESD STM7.1 and ESD TR53
Low Tribocharging Coating - (<100 volts) ANSI/ESD STM
23% Solids - 2 Coat System - Reduces labor needed for initial install and on- going maintenance of the floor
Lead-free RoHS 2, REACH, and Conflict Minerals compliant
UL classified for slip resistance
Made in the United States of America
Part No.
Gallons
46024
2.5 Gal Box
46025
5 Gal Box
46026
55 Gallons

19. Statguard® Neutral Floor Cleaner
Labor saving dissipative cleaner leaves floor clean and free of insulative film with no rinsing
Does not leave insulative residues behind
Cleans Dissipative and Conductive floors and tiles
Formulated with dissipative agents that rejuvenate the properties of Statguard® Floor Finish
Lead-free RoHS, REACH, and Conflict Minerals compliant
Made in the United States of America
Part No.
Gallons
46030
2.5 Gal Box
46031
5 Gal Box

20. Statfree® Burnishing Restorer
Ready-to-use formulation that enhances gloss well beyond burnishing alone
Uses standard burnishing machine - Clean and prepare the ESD flooring for burnishing in one simple step
Keeps the wet look on floors without the need for refinishing
Unique formula extends re-coat cycle
Extends ESD floor electrical properties and restores gloss; reduces cost
The surface resistance (1 x 107 to < 1 x 1010 ohms) meets the ANSI/ESD S
Lead-free RoHS, REACH, and Conflict Minerals compliant
Made in the United States of America
Part No.
Gallons
46011
2.5 Gal Box

21. Statguard® Low Residue Floor Stripper
Strips resilient floors with low pH formula
Reduce rinse time and cutting labor costs by 20% over conventional strippers
Low pH formulation is designed to break up and lift multiple layers of Statguard® Floor Finish
High grade, non-ammoniated, biodegradable and phosphate free
Lifts ESD floor finish from vinyl, concrete, rubber, terrazzo, quarry tile, brick, slate, and unglazed ceramic
Lead-free RoHS 2, REACH, and Conflict Minerals compliant
Made in the United States of America
Part No.
Gallons
46020
2.5 Gal Box
46021
5 Gal Box

22. Statguard® Benefits Easy to apply
Turns standard flooring into an ESD protected floor
Provides superior gloss with easy maintenance
Provides a clear durable coating to allow grounding of mobile personnel and equipment
Eliminates Tribocharging on mobile personnel and equipment
Electrical properties verified using standard test methods

23. Application Tools Needed
Rayon Mop
Dedicated mop*
Bucket
Dedicated bucket*
Statguard® Finish
Quality ESD finish
*Dedicated Tools Eliminate Contamination

24. Application Process Floor Prep Application Dry Time
Strip away old finish
Rinse 2 times or until pH is between 7 and 8
Let floor dry
Application
Standard - 3 coats / Low VOC - 2 coats
Dry Time
45 minutes minimum each coat
Light traffic overnight
Last coat completely hardens in 72 hours

25. Testing and Certification
Resistance to Ground (Rtg) and Surface Resistance (Rtt) using a Surface Resistance Meter Kit accordance with ESD Association documents: ESD TR53, ANSI/ESD S7.1, ANSI/ESD STM97.1, ANSI/ESD S
Charge generation using a Body Potential Meter
Range: ±0.1 to ±999.9V
Certification
Certificate reflecting test results to be provided

26. Maintenance Techniques
Dry Mop
Gloss Damp Mop
Clean Damp Mop
Spray Buff
Burnish

27. Dry Mop Program Benefit Equipment Untreated push broom or dry mop
Process
Removes dirt, grit and dust from wearing & scratching floor
Benefit
Once a night or as required.
Frequency

28. Gloss Damp Mop Program Untreated push broom
3:1 water & Statguard® Floor Finish mix
Equipment
Push broom area
Damp mop area
Process
Increases Gloss
Removes dirt, grit and dust from wearing & scratching floor
Benefit
Once a week or as required
Frequency

29. Clean Damp Mop Program Untreated push broom Statguard® Cleaner
Equipment
Push broom area
Damp mop area
Process
Cleans heel marks and stains
Removes dirt, grit and dust from wearing & scratching floor
Benefit
Once a night or as required
Frequency
Note: The clean damp mop process may reduce the tile gloss

30. Spray Buff Program Untreated dust mop
Spray bottle (3 parts water to 1 part Statguard® finish)
RPM buffer / white or beige pad
Equipment
Push broom area
Spray and buff
Process
Repairs scratches, removes marks and stains
Increases Gloss
Benefit
Once a week or as required
Frequency

31. Burnish Program Untreated dust mop 1-2000 RPM Burnisher White pad
Equipment
Push broom area
Dry Burnish RPM
Dust mop
Process
Cleans heel marks
Increases Gloss
Benefit
Once a week or as required
Frequency

32. Statguard Flooring Team
Carlos De La Isla VP of Sales
Rob DaRosa Sales Manager
Ricardo Garcia Mexico Channel Sales Manager
Alyssa Smith Marketing Manager
DescoIndustries.com

33. Sales Force Network Committed Partners - Reseller / Installers
ICT - US
Freda West - US
Gana Pisos - Mexico
Delta Millennium - Mexico
Expanded Manufacturer’s Rep Network
90+ Desco Industries Reps

34. Master Distributors ICT – USA Freda West – USA Reseller and Installer
Since 1996 ICT has been providing the finest Flooring services available in the industry.
Based out of Saint Charles, IL.
Freda West – USA
Freda West is a flooring contractor that offers Statguard® Conductive Epoxy installation as well as other services.
Based out of Lake Villa, IL.

35. Master Distributors Delta Millenium – Mexico Gana Pisos - Mexico
Reseller and Installer
For more than 10 years Gana Pisos have been providing the installation service of ESD vinyl floors, epoxy and carpets in the Mexican market.
Based out of Guadalajara, Jalisco, México.
Delta Millenium – Mexico
Delta Millenium has more than 30 years of operation in the Mexican territory, time in which it has offered its customers the highest quality products and services in the international market.
Based out of San Pedro Garza García, Aguascalientes, Cancún and Benito Juárez, Mexico City.

36. Recap Statguard Flooring can help you: Qualify the need
Schedule the install
Test the floor for compliance
Guarantee floor performance
Setup maintenance program with building service contractors

37. Website