1. Team Super 8: Sat Morpheus Launch Readiness Review
Jonathan Sobol, Evan Graser, Scott Wurst, Daniel DeWolf, Dan Nowicki, MattJoo Hong, Anthony Lima, Jorge Cervantes
November 27th 2012

2. Mission Overview Morpheus will continuously measure
Ozone concentration
UV-B radiation
To determine the correlation between these as a function of altitude, if any.

3. Design Overview Design Specs: 16 cm sided cube
UV-B diode and ozone sensors at topmost four corners
Other hardware has been placed along internal walls
Heater has been separated into 3 components to distribute heat.

4. Design Overview

5. Test Results: Functional
Standard required sensors (HOBO)
External temperature sensor
Ozone sensors
UV-B photodiode
Camera

6. Test Results

7. Test Results

8. Test Results

9. Camera Test

10. Test Results: Structural
Drop Test
Whip Test
Temperature Test

11. Predicted Results

12. Predicted Results

13. Biggest Worries/Concerns
Arduino not functioning properly
Temperature too extreme for external components

14. Compliance Matrix Description 0.1 0.2 0.3 0.4 0.5
Require-ment #
Description
Measure concentrations of ozone and UV-B radiation as a function of altitude
0.1
Reach an altitude of 30 km
0.2
Maintain an internal temperature above -10 ° C
0.3
Abide by a weight and monetary budget of kg and $250, respectively
0.4
Maintain safe working condition and ensure the general safety of the team members through out the project
0.5
Morpheus must be in pre-flight conditions with in 24 hours after it is retrieved