Presentation is loading. Please wait.

Presentation is loading. Please wait.

Airworthiness Certification Worldwide – An Industry View

Similar presentations


Presentation on theme: "Airworthiness Certification Worldwide – An Industry View"— Presentation transcript:

1 Airworthiness Certification Worldwide – An Industry View
Aerospace Design & Certification Limited Presented by Terry Gibson aeroDAC presentation aeroDAC presentation

2 Introduction About TG. Purpose of my presentation. Airworthiness.
aeroDAC presentation

3 Airworthiness Certification
Initial Airworthiness Type Certificates (TC) Major Changes by the TC holder Supplemental Type Certificates (STC) Minor Changes Repairs Continued Airworthiness Service Bulletins Airworthiness Directives 18 September 2018 aeroDAC presentation aeroDAC presentation 3 3

4 Airworthiness Standards
Generally based on a system created in the USA by the FAA (FAR) and adopted in Europe by the JAA (JAR) now under EASA Certification Specifications (CS). Aircraft, Engines, Propellers & TSO/ETSO Equipment. Meeting the ICAO standard for Airworthiness. aeroDAC presentation

5 Airworthiness Approval
Regulator - Regulators take responsibility for verifying compliance & retain liability. Organisation - Organisations take responsibility for verifying compliance & retain some liability. Individuals - Appointed by Regulators, provide Regulator with compliance statements, Regulator takes most of the liability aeroDAC presentation

6 Airworthiness Approval
Bilateral Arrangements Acceptance of each others approvals 18 September 2018 aeroDAC presentation aeroDAC presentation 6 6

7 THE EU US AGREEMENT on The BASA EU-US was signed on 30 June 2008
It has entered into force on the 1st of May 2011 aeroDAC presentation

8 Now Future? SCOPE OF THE AGREEMENT
Airworthiness and environmental certification (Annex 1) Maintenance (Annex 2) Future? Parties may agree on additional annexes (E.g. FCL, simulators) BOB (role of European Commission and Council) aeroDAC presentation

9 of all other design approvals:
Design provisions: the concept TC/Amended TCs STC, ETSO Certain Major Changes/Repairs Automatic acceptance of all other design approvals: Changes & Repairs etc. aeroDAC presentation

10 Conclusion (2/2) Possibility of new annexes
For product certification: « evolution rather than revolution » For maintenance: transfer of some European Maintenance organisations’ oversight from FAA to NAAs aeroDAC presentation

11 Conclusion aeroDAC presentation

12 Questions aeroDAC presentation

13 Thank you Terry Gibson, Managing Director
Aerospace Design & Certification Ltd Stone Building Paddockhurst Road Turners Hill West Sussex RH10 4SF Tel Mob Fax aeroDAC presentation aeroDAC presentation 13


Download ppt "Airworthiness Certification Worldwide – An Industry View"

Similar presentations


Ads by Google