1. Intel® vPro™ Technology
Intel® Active Management Technology Setup and Configuration HP dc7800p USFF - Small Business Mode

2. Legal Disclaimer Intel Confidential – Intel Internal Use Only
Copyright © 2008 Intel Corporation. All rights reserved.
Intel, the Intel logo, Intel. Leap ahead., the Intel. Leap ahead. logo, Intel vPro, Intel Active Management Technology, and Intel Core 2 Duo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Other names and brands may be claimed as the property of their respective owners.

3. Table of Contents
Client Information
Setup and Configuration

4. Client Information
The following Setup and Configuration instruction as based on an Intel® Desktop Board.
Depending on your motherboard manufacturer and firmware version, you may have a different interface or experience then what is listed in this presentation.
Regardless, the following information should give you the basic steps for configuring any Intel® vPro™ client in Small Business mode.

5. What is Setup and Configuration?
Setup and Configuration is the process that makes Intel® Active Management Technology features accessible to management applications.
Before management applications can access an Intel® Active Management Technology device, the device must be populated with various configuration settings such as usernames, passwords, network parameters, Transport Layer Security (TLS) certificates (applies to Enterprise Mode), and keys necessary for secure communications.

6. Setup and Configuration

7. Setup and Configuration
Power on the Intel® vPro™ client
Press F10 to enter the BIOS setup

8. Setup and Configuration
Select: English

9. Setup and Configuration
Select: Advanced

10. Setup and Configuration
Select: Power-On Options

11. Setup and Configuration
Change MEBx Setup Prompt to: Displayed

12. Setup and Configuration
Change POST Delay (in seconds) to: 15
Press F10 to Accept

13. Setup and Configuration
Select: AMT Options

14. Setup and Configuration
Change SOL Character Echo to: Disable

15. Setup and Configuration
Change SOL Terminal Emulation Mode to: ANSI

16. Setup and Configuration
Change SOL Local Keyboard to: Enable
Press F10 to Accept

17. Setup and Configuration
Go to File menu
Select: Save Changes and Exit

18. Setup and Configuration
Press F10 to Save Changes and Exit

19. Setup and Configuration
During Reboot press: CTRL-P

20. Setup and Configuration
You are required to change the Intel® Management Engine Password
This is only required for initial setup and Configuration

21. Setup and Configuration
Enter the password: admin
This is only required for initial setup and Configuration

22. Setup and Configuration
Select: Change Intel® ME Password
This is only required for initial setup and Configuration

23. Setup and Configuration
Password needs to be at least 8 characters, using upper and lower case letters, numbers, and symbols.
Example: Acmec0rp!

24. Setup and Configuration
Type your password to Verify.

25. Setup and Configuration
This is the Intel® Management Engine main screen where you can make changes to the:
Intel® Management Engine Configuration
Intel® Active Management Technology Configuration
Change Intel® Management Engine Password

26. Setup and Configuration
Select: Intel® ME Configuration

27. Setup and Configuration
Press Y to Continue

28. Setup and Configuration
Select: Intel® ME Firmware Local Update Qualifier

29. Setup and Configuration
Set to: [*] ALWAYS OPEN

30. Setup and Configuration
Select: Intel® ME Features Control

31. Setup and Configuration
Select: Manageability Feature Selection

32. Setup and Configuration
Set to: [*] Intel® AMT

33. Setup and Configuration
Select: Return to Previous Menu

34. Setup and Configuration
Select: Intel® ME Power Control

35. Setup and Configuration
Select: Intel® ME ON in Host Sleep States

36. Setup and Configuration
Set to: [*] Desktop: ON in xxx Select the desired mode

37. Setup and Configuration
Select: Return to Previous Menu
Note:
Depending on the changes made, your system may restart.
If this occurs, please re-enter the setup by pressing <CTRL+P> when the system completes the restart.

38. Setup and Configuration
Select again: Return to Previous Menu

39. Setup and Configuration
Select: Intel® AMT Configuration

40. Setup and Configuration
Select: Host Name

41. Setup and Configuration
Insert Windows computer name. Our example is: vpro-pc1 set computer name as desired
Important Note:
In DHCP mode: The computer name must match the computer name in Windows
In Static IP mode: The computer name must be different than the computer name in Windows.
TCP/IP Configuration will be discussed in the upcoming slides.
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

42. Setup and Configuration
Select: TCP/IP

43. Setup and Configuration
The Network Interface should be Enabled by default
Press N to NOT Disable Network Interface

44. Setup and Configuration
DHCP should be Enabled by default
Press N to NOT Disable DHCP

45. Setup and Configuration
Set the Domain name. Our example is: vprodemo.com

46. Setup and Configuration
Select: Provisioning Model

47. Setup and Configuration
By Default should be set to: Intel® AMT 3.0 Mode
Press N to NOT Change to Intel® AMT 1.0 Mode

48. Setup and Configuration
By Default should be set to: Enterprise
Press Y to Change to Small Business

49. Setup and Configuration
After Provisioning to Small Business the Intel® AMT Configuration menu will change
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

50. Setup and Configuration
Select: VLAN
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

51. Setup and Configuration
By default VLAN is set to Disabled
Press N to NOT Enable VLAN
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

52. Setup and Configuration
Select: SOL/IDE-R
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

53. Setup and Configuration
Press Y to Continue
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

54. Setup and Configuration
Set Username & Password to: [*] Enabled
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

55. Setup and Configuration
Set Serial Over LAN to: [*] Enabled
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

56. Setup and Configuration
Set IDE Redirection to: [*] Enabled
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

57. Setup and Configuration
Select: Secure Firmware Update
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

58. Setup and Configuration
Set to: [*] ENABLED
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

59. Setup and Configuration
Select: PRTC
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

60. Setup and Configuration
Can usually leave blank but if different then shown, change PRTC to: YYYY:MM:DD:HH:MM:SS
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

61. Setup and Configuration
Select: Idle Timeout
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

62. Setup and Configuration
Normally leave unchanged but if not 1 change to: 1
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

63. Setup and Configuration
Scroll Down and Select: Return to Previous Menu
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

64. Setup and Configuration
To Exit the Main Menu Select: Exit
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464

65. Setup and Configuration
Press Y to Confirm Exit
Once you Confirm Exit the system will restart and your settings will be in effect.
Note: Each Client needs a unique name. If you have more then one here is an example naming convention:
VPRO4462, VPRO4463, VPRO4464