1. LOCATION: BRISBAN AIRPORT and ADJACENT PROPERTIES
Site Specific Induction Information
This site specific information is in addition to the information you would have received during the completion of the Qantas Group on-line Supplier HSE Induction Program. It is therefore important you read this information before you arrive at the site. If you have any queries regarding this information you must contact either your Supplier Manager or your Qantas Group Supervisor for clarification.
LOCATION: BRISBAN AIRPORT and ADJACENT PROPERTIES
EMERGENCY CONTACTS
First call for all fire and first aid at all airport properties is:
International MOCO –
Domestic POCO –
First call for security breaches (Contact the relevant supervisor in the first instance)
Duty Security Controller –
First call for spills – Contact the Building Supervisor (details on next slide)
For all other emergencies at the Airport and City Properties - 000
For emergencies requiring the immediate assistance of State Ambulance or Fire Services, you must clearly state this need to MOCO/POCO who will make the 000 call to request these emergency services.
All accidents/incidents or near misses must be reported immediately to your Qantas Supplier Manager.
EVACUATION & ASSEMBLY POINTS
At Qantas Brisbane Properties a two level emergency alarm
system is used as follows:
The first tone (beep beep beep) signifies an alert tone only, you should prepare to evacuate and keep a listening watch
A building evacuation is initiated by an intermittent rising tone (whoop whoop whoop)
You should immediately evacuate the building and go directly to the nearest Assembly Point. Never re-enter a building until being given the all clear by the Area Warden (who will be wearing a Red Hat).
Each alarm stage is followed by a verbal announcement via the building Public Address System that confirms the action that should be taken.
The location of Assembly Points and Emergency Exits are detailed on Evacuation Plans located on each floor of every building. Take the time to familiarise yourself with these when working in a new area.
Staff, Suppliers (Contractors) and Visitors are required to take direction from Wardens and assemble as directed.
Fire extinguishers are available at various locations and sign-posted accordingly.
Any accidents/incidents airside is also to be reported immediately to BAC Airside Operations Centre on
BRISBANE AIRPORT & ADJACENT PROPERTIES
Issued 08/08/13

2. Site Specific Induction Information
OTHER CONTACTS
All Sites - Property Supervisor
Domestic Terminal (DTB) Airport
Operations Coordinators
International Terminal (ITB) Airport
Operations Coordinators
International Freight (FTB)
Freight Operations Supervisor
Freight Administration Controller (Out of Hours)
Qantas Flight Catering (QFC)
QFCL Representative
Engineering and Supply (ESB)
Maintenance Supervisor
Duty Leading Hand (Out of Hours)
Maintenance Hanger (HG2)
Hanger Leading Hand
Domestic Coordinator (Out of Hours)
Australian Air Express (AAE and GEM)
AAE Representative
Adelaide Street City
Sales Administration
Qantas Direct Manager
SECURITY and ACCESS- ‘Sterile Areas’
Supplier HSE Induction Card, Contractor ID or visitors cards are to be displayed at all times.
Entry to Security Restricted Areas (SRA), restricted to persons displaying an Aviation Security Identification Card (ASIC) and a Qantas security pass or you must be escorted and have a DIA visitors pass or Qantas visitors pass.
Access to "Sterile Areas" is strictly via security and security screening points.
Suppliers (Contractors) taking tools/materials into sterile areas of the Terminal are required to strictly adhere to the conditions of entry. All such items must be accountable and kept secure from the public at all times.
If you do not have an ASIC pass and are working with tools in the Qantas Club (sterile area of DTB) you must have a visitors pass and be escorted.
VEHICLE MOVEMENTS
The general speed limit on the Airport is 20 Km/Hr unless indicated otherwise.
The marked roadway system must be used at all times.
Airside drivers licence + state licence + vehicle registered with BACL or BACL Safety Escort is required when driving in Security Restricted Areas (SRA).
General speed on BNE airport is 20KPH in front of and in-between the Domestic and International terminals, also along the front of the GA Apron and as signposted in other areas.
BRISBANE AIRPORT & ADJACENT PROPERTIES
Issued 08/08/13

3. Site Specific Induction Information
MAIN ACCESS POINTS
Gate 23 - main entry at Hakea St, off Airport Drive. Gate 23 is now the main entry at Hakea St, off Airport Drive.
Brisbane International Terminal (BNE ITB). Qantas has designated office / lunch room areas on ground floor, level 1, level 2 and level 3
Brisbane Domestic Terminal (BNE DTB). This includes the Qantas areas located on levels 1,2,3 at the northern end of the terminal including the Satellite
International Freight Terminal (BNE FTB) - located at No.23 Qantas Drive, Brisbane Airport.
Access is via the main gate and on arrival all contractors must report to the Security Controller located at the Agency Acceptance Counter on the Ground Floor. Contact on Site is the Freight Administration Controller or (Out of Hours)
BRISBANE AIRPORT & ADJACENT PROPERTIES
Issued 08/08/13

4. Site Specific Induction Information
MAIN ACCESS POINTS
Property / GSE / Fleet Presentation - located at No.9 Qantas Drive, Brisbane Airport
All personnel must report to reception on arrival, sign in and call contact.
Maintenance Hangar No. 2 (BNE 002), located on the corner of Priors Road and Pandanus Avenue, Pinkenba. Access is via main entry gate located on Pandanus Ave. Speaker on gate to organise entry into facilty car park. Admission via reception
Maintenance Hangar No. 1 (BNE 001) - located on Pandanus Avenue, Pinkenba
Access is via entry gate on Pandanus Avenue. Access must be prearranged with the On-site Supervisor prior to attending site.
Contact on Site is the Facility Coordinator ph –
Maintenance Hangar No. 3 (BNE 003) - located on Main Myrtletown Rd, Pinkenba. Access is via main security gate located on Main Myrtletown Rd. Security will phone through to contact and arrange escort.
BRISBANE AIRPORT & ADJACENT PROPERTIES
Issued 08/08/13

5. Site Specific Induction Information
MAIN ACCESS POINTS
Qantas Freight - Occupied Properties (BNE AAE & BNE GEM)
Access is off Dryandra Road, Brisbane Airport
Access is to be prearranged with Freight with the Representative. Contact on Site is the Australian Air Express (AAE and GEM) AAE Representative ph
BRISBANE AIRPORT & ADJACENT PROPERTIES
Issued 08/08/13