1. Click to advance slide.

2. It is said that every aircraft accident has an “accident chain”
It is said that every aircraft accident has an “accident chain”. There is no one item or event that causes the accident. It is a series of events and decisions that contribute to the accident. If we were to break any one of the links in the chain the accident could possibly be avoided.
Animation is automatic. Click to advance to next slide.
9/18/2018

3. PREFLIGHT
OBJECTIVE
With the use of photos and worksheets the audience will “perform” a preflight inspection.
After the “Preflight” we will discuss additional items not on the factory checklist.
The audience will view the preflight inspection again with the discrepancies pointed out.
What do we mean by “Going beyond the preflight”?
Click to advance slide.
9/18/2018

4. PREFLIGHT Over the years NTSB and FAA Data has shown
that a number of accidents have causal factors
related to pre-flight activities.
Click to advance slide.
9/18/2018

5. 9/18/2018 Animation is automatic.
While loss of control flights lead the pack when it comes to GA fatal accidents, NTSB accident data from shows poor preflight inspections caused or contributed to 156 GA accidents and 41 fatalities. One way of shoring up your preflight skills is to follow the steps of an “advanced preflight,”
Refer the Preflight Workshop Handout, Items 1-3, & 7-8.
Click to advance slide.
9/18/2018

6. The preflight inspection can be considered
PREFLIGHT WORKSHOP
The preflight inspection can be considered
one of the first links in the “accident chain”.
Do yourself and your
passengers a favor and break
that link by performing a thorough
preflight prior to every flight.
Animation is automatic.
Remember that you, as Pilot in Command, are the last link in the chain. You are the last chance there is to take some action that will help avoid an accident.
Click to advance to next slide.
9/18/2018

7. PREFLIGHT Handout Materials 172N Preflight Inspection Checklist
Preflight Worksheet
Preflight Handout
Advanced Preflight M-Pamphlet
Advanced Preflight Article
Briefly go over each handout.
Click to advance slide.
9/18/2018

8. PREFLIGHT What type of preflight do you normally do?
Are you the “Kick the tires and light the fires” pilot?
Do you follow the checklist to the “T”?
Are you the pilot that performs the preflight looking for problems?
Click to advance slide.
9/18/2018

9. PREFLIGHT
Before we look at the preflight photos please ensure you have a pencil or pen, the check list, and the worksheet.
After viewing the preflight and noting the discrepancies we will view it again with the discrepancies revealed.
For this demonstration we will be performing the preflight like the pilot who follows the checklist to the “T”.
Please ensure all participants have a copy of the preflight checklist and the worksheet.
Click to advance slide.
9/18/2018

10. PREFLIGHT
It is one thing to look at the airplane during the preflight inspection. It is something completely different to “see” the airplane during the preflight inspection.
When you are performing the Preflight Inspection try to block out any preconceived ideas of what you expect to see and do the Preflight with the mindset of “What will I find this time?”
Click to advance slide.
9/18/2018

11. THE PREFLIGHT INSPECTION
Preflight Photos
Click to advance slide.
9/18/2018

12. Ensure you have the current Owner’s Manual or POH for your aircraft
Ensure you have the current Owner’s Manual or POH for your aircraft. It will have the Preflight Checklist, Performance Charts and the list of placards and markings that should be in view of the pilot.
Some aircraft were issued Airplane Flight Manuals (AFM) as simple as a sheet of paper. Some have Owner’s Manuals while others have FAA Approved Pilot Operating Handbooks (POH). The preflight inspection procedures are found in Section 4 of the AFM and the POH. Most older vintage aircraft may not have a preflight inspection checklist available. In this case it is prudent for the owner to devise a checklist using other aircraft as a guide and including any items that are peculiar to their aircraft. For older aircraft that do not have a FAA Approved POH most of the operating limitations are in the form of placards.
Click to advance slide.
9/18/2018

13. Use the checklist to perform the preflight inspection
Use the checklist to perform the preflight inspection. If a manufactures’ checklist is not available create one to fit your aircraft using another aircraft’s checklist plus any items peculiar to your aircraft..
Click to advance slide.
9/18/2018

14. 9/18/2018 Referencing the preflight checklist. Inspect the cabin.
1. Control Wheel Lock -- REMOVE.
2. Ignition Switch-- OFF.
3. Avionics Power Switch-- OFF.
4. Master Switch -- ON.
5. Fuel Quantity Indicators-- CHECK QUANTITY.
6. Master Switch - - OFF.
Click to advance slide.
9/18/2018

15. CABIN
7. Baggage Door -- CHECK, lock with key if child's seat is to be
occupied..
Click to advance slide.
9/18/2018

16. The checklist now has us moving from the baggage door to the empennage.
1. Rudder Gust Lock -- REMOVE.
2. Tail Tie-Down-- DISCONNECT.
3. Control Surfaces-- CHECK freedom of movement and security.
Click to advance slide
9/18/2018

17. 9/18/2018 (2) EMPENNAGE 1. Rudder Gust Lock -- REMOVE.
2. Tail Tie-Down-- DISCONNECT.
3. Control Surfaces-- CHECK freedom of movement and security.
Click to advance slide
9/18/2018

18. 9/18/2018 (2) EMPENNAGE 1. Rudder Gust Lock -- REMOVE.
2. Tail Tie-Down-- DISCONNECT.
3. Control Surfaces-- CHECK freedom of movement and security.
Click to advance slide
9/18/2018

19. 9/18/2018 (2) EMPENNAGE 1. Rudder Gust Lock -- REMOVE.
2. Tail Tie-Down-- DISCONNECT.
3. Control Surfaces-- CHECK freedom of movement and security.
Click to advance slide
9/18/2018

20. 9/18/2018 (2) EMPENNAGE 1. Rudder Gust Lock -- REMOVE.
2. Tail Tie-Down-- DISCONNECT.
3. Control Surfaces-- CHECK freedom of movement and security.
Click to advance slide
9/18/2018

21. 9/18/2018 (2) EMPENNAGE 1. Rudder Gust Lock -- REMOVE.
2. Tail Tie-Down-- DISCONNECT.
3. Control Surfaces-- CHECK freedom of movement and security.
Click to advance slide
9/18/2018

22. 9/18/2018 (2) EMPENNAGE 1. Rudder Gust Lock -- REMOVE.
2. Tail Tie-Down-- DISCONNECT.
3. Control Surfaces-- CHECK freedom of movement and security.
Click to advance slide
9/18/2018

23. The checklist now has us moving from the empennage to the Rt
The checklist now has us moving from the empennage to the Rt. Wing trailing edge.
Click to advance slide.
9/18/2018

24. 9/18/2018 (3) RIGHT WING Trailing Edge
1. Aileron -- CHECK freedom of movement and security.
Click to advance slide.
9/18/2018

25. 9/18/2018 (3) RIGHT WING Trailing Edge
1. Aileron -- CHECK freedom of movement and security.
Click to advance slide.
9/18/2018

26. 9/18/2018 (3) RIGHT WING Trailing Edge
1. Aileron -- CHECK freedom of movement and security.
Click to advance slide.
9/18/2018

27. The checklist has us moving from the trailing edge to the rt
The checklist has us moving from the trailing edge to the rt. Wing tie down.
Click to advance slide.
9/18/2018

28. 9/18/2018 (4) RIGHT WING 1. Wing Tie-Down -- DISCONNECT.
Click to advance slide.
9/18/2018

29. (4) RIGHT WING
2. Main Wheel Tire -- CHECK for proper inflation.
Click to advance slide.
9/18/2018

30. (4) RIGHT WING
3. Before first flight of the day and after each refueling, use sampler
cup and drain small quantity of fuel from fuel tank sump quick drain
valve to check for water, sediment, and proper fuel grade.
Click to advance slide.
9/18/2018

31. (4) RIGHT WING
4. Fuel Quantity-- CHECK VISUALLY for desired level.
5. Fuel Filler Cap --SECURE.
Click to advance slide.
9/18/2018

32. As we follow the check list we move from the fuel cap to the nose.
Click to advance slide.
9/18/2018

33. (5) NOSE
1: Engine Oil Level -- CHECK, do not operate with less than four
quarts. Fill to six quarts for extended flight.
2. Before first flight of the day and after each refueling, pull out
strainer drain knob for about four seconds to clear fuel strainer of
possible water and sediment. Check strainer drain closed. If water
is observed, the fuel system may contain additional water, and
further draining of the system at the strainer, fuel tank sumps, and
fuel selector valve drain plug will be necessary.
Click to advance slide.
9/18/2018

34. (5) NOSE
3. Propeller and Spinner-- CHECK for nicks and security.
4. Landing Light(s) -- CHECK for condition and cleanliness.
5. Carburetor Air Filter -- CHECK for restrictions by dust or other
foreign matter. .
Click to advance slide.
9/18/2018

35. (5) NOSE
3. Propeller and Spinner-- CHECK for nicks and security.
4. Landing Light(s) -- CHECK for condition and cleanliness.
5. Carburetor Air Filter -- CHECK for restrictions by dust or other
foreign matter.
Click to advance slide.
9/18/2018

36. (5) NOSE
6. Nose Wheel Strut and Tire -- CHECK for proper inflation.
7. Nose Tie-Down - - DISCONNECT. .
Click to advance slide.
9/18/2018

37. (5) NOSE
6. Nose Wheel Strut and Tire -- CHECK for proper inflation.
7. Nose Tie-Down - - DISCONNECT. .
Click to advance slide.
9/18/2018

38. (5) NOSE
8. Static Source Opening (left side of fuselage) -- CHECK for stoppage.
Click to advance slide.
9/18/2018

39. (6) LEFT WING
1. Main Wheel Tire -- CHECK for proper inflation.
Click to advance slide.
9/18/2018

40. (6) LEFT WING
1. Main Wheel Tire -- CHECK for proper inflation.
Click to advance slide.
9/18/2018

41. (6) LEFT WING
2. Before first flight of the day and after each refueling, use sampler
cup and drain small quantity of fuel from fuel tank sump quick drain
valve to check for water, sediment and proper fuel grade.
9/18/2018

42. (6) LEFT WING
3. Fuel Quantity-- CHECK VISUALLY for desired level.
4. Fuel Filler Cap --SECURE.
Click to advance slide.
9/18/2018

43. 9/18/2018 (7) LEFT WING Leading Edge
1. Pitot Tube Cover -- REMOVE and check opening for stoppage.
Click to advance slide.
9/18/2018

44. 9/18/2018 (7) LEFT WING Leading Edge
1. Pitot Tube Cover -- REMOVE and check opening for stoppage.
2. Fuel Tank Vent Opening-- CHECK for stoppage.
3. Stall Warning Opening -- CHECK for stoppage. To check the
system, place a clean handkerchief over the vent opening and
apply suction; a sound from the warning horn will confirm system
operation.
4. Wing Tie-Down - - DISCONNECT.
Click to advance slide.
9/18/2018

45. The check list now has us moving from the leading edge to the trailing edge.
Click to advance slide.
9/18/2018

46. 9/18/2018 (7) LEFT WING Trailing Edge
Aileron -- CHECK for freedom of movement and security.
That is the last item on our check list.
Click to advance slide.
9/18/2018

47. The Preflight checklist is completed
The Preflight checklist is completed. Are you ready to get in the cockpit and fly?
Click to advance slide.
9/18/2018

48. THE PREFLIGHT INSPECTION
Before we review the Preflight Inspection you just completed. Let us look at some items that were not included in the checklist and see if we find any other discrepancies.
Perhaps the pilot should look a little closer at the aircraft.
Click to advance slide.
9/18/2018

49. 9/18/2018 The checklist did not mention the aircraft documentation.
What do the regulations say about the documentation that must be aboard your aircraft? Remember the acronym AROW; Airworthiness Certificate, Registration, Operating Limitations and Weight and Balance. Check to ensure the Airworthiness Certificate and Registration are in the aircraft. This aircraft has a temporary registration due to the recent purchase of the aircraft. Note the pink temporary Registration certificate behind the Airworthiness Certificate. Operating limitations can be in the form of the Owner’s Manual, FAA Approved Flight Manual, placards or a combination thereof.
Click to advance slide.
9/18/2018

50. The weight and balance data needs to be accurate and current
The weight and balance data needs to be accurate and current. It must be in the aircraft at all times. Part of your preflight planning includes performing a weight and balance computation.
Click to advance slide.
9/18/2018

51. THE PREFLIGHT INSPECTION
The checklist in section 1 does not address inspecting the radios for operation. Inspection of the interior is not covered either. For example what about ensuring the seat locks function properly, the seat belts are in good condition and operate properly. Test the elevator trim for freedom of movement. Turning the fuel selector to select the appropriate fuel tank in order to sump fuel from the fuel strainer.
Click to advance slide.
9/18/2018

52. What about the exterior of the cabin and aft fuselage
What about the exterior of the cabin and aft fuselage? Those areas are not mentioned in the checklist. Like any other surface you would be looking for loose or missing panels, missing fasteners, operation of any lights and condition of antennas.
Click to advance slide.
9/18/2018

53. Let us talk about the fact that the Nav lights are not discussed in the checklist. The landing light is mentioned in Section 5 but no where is the Nav lights mentioned.
Section 4 has no reference to inspecting the leading edge of the rt. wing for damage or inspecting the cabin air inlets for obstructions by debris and various creatures including wasps.
Section 5 does not address the security of the cowling.
Section 7 of the checklist talks about the Lt. wing leading edge and Sections 4 talks about the right wing but nothing about the leading edge. Even though Section 7 discusses the pitot tube, fuel tank vent and stall warning opening there is no reference to inspecting the leading edge for damage or inspecting the cabin air inlets for obstructions by debris and various creatures including wasps.
Another item missing from the checklist is the practice of lowering the flaps for inspection.
Click to advance slide.
9/18/2018

54. PREFLIGHT
Did you notice any additional discrepancies in the in the slides we just viewed?
As we have demonstrated following the checklist to the “T” may not cover everything that should be looked at.
It is highly recommended that you follow a checklist. So what do you do now?
Click to bring in each senctence.
Click to advance slide.
9/18/2018

55. PREFLIGHT
Consider the Manufacturer’s checklist as the minimum standard to follow.
If you find it is lacking in some areas then create your own checklist.
Make sure it includes all items on the Manufacturer’s list and any additional items you deem necessary.
The 1973 Cessna 172 Owner’s Manual has the checklist we followed in this presentation. If you were to look at the Cessna 172S Operations Handbook in Section 4 Normal Procedures you would find the Preflight checklist. This checklist has many of the items that were missing in the checklist we used for this presentation. Do some research on checklists and add those additional items you feel should be inspected and add them to your aircraft’s original Preflight Checklist. (click)
For those who are into modern technology there are several checklists available for the smartphone. There are some that are aircraft specific and others that are generic that you can use to build a checklist for your aircraft with any additional items.
Click to advance slide.
9/18/2018

56. THE PREFLIGHT INSPECTION
Now let’s take another look at the aircraft this time pointing out the discrepancies.
Preflight Discrepancies
Click to advance slide.
9/18/2018

57. 9/18/2018 Animation is automatic.
Airworthiness Certificate is for a different aircraft. Always check your paperwork prior to flight to ensure the correct paperwork is returned to your aircraft after maintenance.
Click to advance to next slide.
9/18/2018

58. 9/18/2018 Animation is automatic. Click to advance to next slide.
Always inspect control surface hinge lines for missing fasteners, cotter pins cracked fittings and the unwanted tenant. Use caution when moving the control surfaces.
9/18/2018

59. Tail Skid is sideways and tie down ring is bent over
Tail Skid is sideways and tie down ring is bent over. You may need to have the rear bulkhead inspected for cracks at the tie down ring attach point.
Click to advance slide.
9/18/2018

60. 9/18/2018 Animation is automatic.
Inspect all control fasteners for missing cotter pins. A missing cotter pin can cause the nut to loosen and fall off. Once the bolt falls out the control surface or trim tab can move without pilot input or it can flutter sometimes causing catastrophic results.
Click to advance to next slide.
9/18/2018

61. 9/18/2018 Animation is automatic.
Ensure all panel fasteners are secure and replace any that are missing.
Click to advance to next slide.
9/18/2018

62. 9/18/2018 Animation is automatic.
Always make sure all inspection panels are secure and their fasteners are tight.
Click to advance to next slide.
9/18/2018

63. 9/18/2018 Animation is automatic.
Always make sure all inspection panels are secure and their fasteners are tight.
Click to advance to next slide.
9/18/2018

64. 9/18/2018 Animation is automatic.
Remember the right nav light is supposed to be green.
Click to advance to next slide.
9/18/2018

65. 9/18/2018 Animation is automatic.
Make sure all landing gear tires are properly inflated. A low tire can break the bead and deflate the tire during taxi or the on touchdown the tire can spin ripping out the valve stem and deflating the tire possibly causing a loss of control. Note also the fluid that appears to be close the brake caliper. Although it is not from the brakes and the source is unknown it would be prudent of the pilot to investigate and try to determine if the fluid is from the brakes or if it is from another aircraft.
Click to advance to next slide.
9/18/2018

66. 9/18/2018 Animation is automatic.
Oil level is at 4 qts. What is your minimum oil level?
Click to advance to next slide.
9/18/2018

67. 9/18/2018 Animation is automatic.
Check spinner for cracks and make sure the fasteners are secure.
Click to advance to next slide.
9/18/2018

68. 9/18/2018 Animation is automatic.
Check spinner for cracks and make sure the fasteners are secure. Ensure there is no FOD in the engine inlets, oil coolers etc. Look for misplaced rags, birds nests or anything else that doesn’t belong there. Ensure all cowling fasteners are in place.
Click to advance to next slide.
9/18/2018

69. 9/18/2018 Animation is automatic.
Replace any missing cowling fasteners. Make sure the static port is clear. Static ports are blocked sometimes during washing to keep water out or during some instrument tests. Always make sure the port is clear prior to flight.
Look at the Preflight Workshop Handout item 2.
Click to advance to next slide.
9/18/2018

70. Always check the security of the fuel caps
Always check the security of the fuel caps. Most modern caps with tabs will have the tabs lined up with the slipstream when the cap is properly secured.
Smooth caps should have indexing marks on the cap that align with marks on the wing to show when the cap is secured.
Click to advance slide
9/18/2018

71. 9/18/2018 Animation is automatic.
Check any safety wire for breakage and that it is installed properly. Remember the wire should be installed so that the tension on the wire pulls to tighten the bolt or nut.
Click to advance to next slide.
9/18/2018

72. 9/18/2018 Animation is automatic. The left nav light should be red.
Click to advance to next slide.
9/18/2018

73. 9/18/2018 Animation is automatic.
Make sure all panels are installed and secured prior to flight. This will be most important after the aircraft comes out of maintenance.
Click to advance to next slide.
9/18/2018

74. First picture shows fuel sample. See anything here
First picture shows fuel sample. See anything here? Second picture shows fuel sample held up to the sky. Do you see anything in this picture? Third picture shows the same fuel sample held up against the white fuselage. Now what do you see?
Animation is automatic. Click to advance slide.
9/18/2018

75. 9/18/2018 Can you spot what might be wrong here?
Click to advance slide.
9/18/2018

76. 9/18/2018 Remember you did the last preflight!!!
Click to advance slide.
9/18/2018

77. PREFLIGHT
Tips and tricks to performing a more thorough preflight. The following are suggestions to assist you in completing a detailed preflight inspection.
Click to advance slide.
9/18/2018

78. PREFLIGHT
Avoid distractions such as conversations with others during the preflight inspection. Always use a rag and flashlight when doing your preflight. Smart phone flashlight and camera
Distractions are on the largest factors in forgetting items on a preflight inspection. Conversations and phone calls should be eliminated during the preflight. Use of a checklist will assist in not forgetting an item. If you are inadvertently interrupted always go back a few steps and restart the inspection from there. Always do the inspection in an orderly manner. Do not perform it haphazard going from one end of the aircraft to the other, side to side then back to the middle. Keep it organized and sequential in approach just like the checklist. There should be nothing on your mind but the preflight. (Click)
Carry a rag with you when inspecting the aircraft. Use it to clean off oil from surfaces so you can inspect the area. Oil and dirt can hide a multitude of problems. A bright flashlight is very important when inspecting areas like hinge lines and into dark areas of the fuselage and engine cowl. A flashlight is invaluable when trying to look at items when the sun is reflecting off of the rest of the aircraft. It helps illuminate the fasteners on the control surface hinges. The newer LED flashlights are very bright and consume very little battery power. (Click)
Smart phones can utilize a flashlight app to turn the camera’s flash into a decent flashlight. Also if you see something you are not sure of you can take a picture of it and text or it to your mechanic for an opinion before you take off with a potential problem.
Click to advance slide.
9/18/2018

79. PREFLIGHT
Avoid a complacent attitude. Have a plan if you need a mechanic. Have a plan “B”.
Always approach the preflight like you would if you were inspecting a new aircraft for the first time or before the first flight after maintenance has been performed. Keep your mind open to the identification of discrepancies. Your inspection should convince you the aircraft is safe for flight. Do not take the attitude that it was good the last time I looked at it so it must be good this time. Being complacent in how you do your preflight can lead to you not seeing a defect when one exists. How many more times must the dipstick be forgotten on the cowling or across the spinner hub? How many more fuel caps will be left unsecured or the tow bar still attached? These are all things that happen but they are also things that are on the preflight checklist. Why are they continually missed? (Click)
Have a plan if you need a mechanic. Keep the phone number of your mechanic or the mechanic for the rental aircraft handy. You never know when you will need the AMT’s advise on an issue found during preflight. Remember your smart phone. Take a picture if you have to and send it to the AMT for an opinion. If you are in doubt of the condition of the aircraft do not fly it. (Click)
Have a plan “B”. Always have an alternate plan in case you find a grounding item. Drive if you have to go to the original destination. Always let your passengers know that if an issue was to arrive that the group would be taking alternate transportation. If the issue arises while at an interim stop or prior to the return leg of the trip and the aircraft can not be repaired immediately that you would be using some form of alternate transportation. Be prepared to spend the night if necessary. Make sure passengers or family is aware of the safety factors in preflight and that you will make the right decision even if it is inconvenient. Do not risk flying an aircraft that is unairworthy.
Click to advance slide.
9/18/2018

80. PREFLIGHT
Try to personally fuel the aircraft or at least supervise the fueling. After each flight perform a Post Flight Inspection. Preflight Considerations following maintenance.
The pilot should always try to fuel their own aircraft. This will help ensure the correct grade and quantity is delivered. If you can not fuel the aircraft at least supervise the activity to ensure the proper grade and quantity is delivered. Try to park the aircraft on a level spot to ensure even fueling or to ensure the tanks are indeed topped off. Fueling on an uneven surface can give erroneous fuel level indications. (Click)
After each flight the pilot should perform a post flight inspection of the aircraft. The pilot should walk around the aircraft looking for anything out of the ordinary following a flight. The pilot should look for oil leaks, missing fasteners, damage from bird strikes, etc. It is much easier to have items repaired after a flight than trying to get things fixed prior to the next flight. There is the possibility of no AMTs being available to make the repairs if you find discrepancies on your preflight on a weekend. It is a good idea to clean the airplane at this time and to verify all fluid levels. (Click)
If you are waiting for your aircraft during maintenance do not rush the AMT or get in their way. This could lead to errors that may have devastating results. If the work involves correcting discrepancies, make sure they are resolved and signed off. Do not try to perform your preflight while maintenance is being performed. This should raise a red flag to anyone seeing it take place. Make certain the AMT has released the aircraft and you have verified it is ready . Remember it is the owner/operator’s responsibility to ensure the appropriate log book entries have been made for the maintenance performed. Get a briefing from the AMT about the work performed and if that works would affect a change in the preflight inspection or any inflight operations. Make certain the aircraft is airworthy.
Click to advance slide.
9/18/2018

81. PREFLIGHT Post Maintenance Preflight Advanced Preflight M-Pamphlet
When performing a preflight after maintenance has been completed be especially vigilant in looking for items that may have been left behind. Look for tools, rags, fluid spills, missing fasteners, etc. Verify proper operation of the flight controls/systems after maintenance was performed on those areas. The pilot should verify all maintenance record entries have been made including annual/100 hour inspections, ADs, ELT, etc. If you are renting the aircraft try to schedule time in advance of the flight for your review. Clear communication with the AMT is essential. (Cllick)
You have been provided an Advanced Preflight M-pamphlet for your reference. This pamphlet goes into detail about how to do a thorough records review. Developing your additional items checklist and some additional resources.
Click to advance slide.
9/18/2018

82. GOING BEYOND THE PREFLIGHT INSPECTION
Click to advance slide.
9/18/2018

83. GOING BEYOND THE PREFLIGHT INSPECTION
Remember early on we asked what type of pilot are you when it comes to preflight?
Regardless of how you answered that question lets ask one more.
When does your preflight actually begin?
Click to bring up second part of the slide.
Click to advance slide.
9/18/2018

84. GOING BEYOND THE PREFLIGHT INSPECTION
Now that you have thought about it.
When does you preflight really begin?
If you are going on a short local flight or just going up to do some pattern work your preflight may start at the aircraft.
Click to bring up second half of slide.
Click to advance slide.
9/18/2018

85. GOING BEYOND THE PREFLIGHT INSPECTION
What if you are going on a cross country flight or a flight that may take several days?
Plan your route of flight. Check weather forecast early and again before take off. Check aircraft performance compared to destination airport and any alternate airports along your route. Check weight and balance. Calculate fuel needed. File a Flight Plan.
Click to advance slide.
9/18/2018

86. GOING BEYOND THE PREFLIGHT INSPECTION
If increasing your knowledge about the preflight of your aircraft is important.
How about increasing your knowledge about your aircraft records?
Whether you are an aircraft owner or a renter, having intimate knowledge of the aircraft is important. As a renter it may be more difficult to review the aircraft records. It would be prudent to ask to be shown the latest information on the maintenance and current inspection status, status of any ADs, any open discrepancies. If the rental company utilizes a status board for their aircraft ask to be shown how it is used and learn about all the information on it.
The more you know about your aircraft the better prepared you will be to find problems before they become an inflight emergency.
Click to advance slide.
9/18/2018

87. GOING BEYOND THE PREFLIGHT INSPECTION
Any good preflight begins with knowledge of:
Aircraft’s History
It’s systems and components
Any weak spots or possible failure areas
A good relationship with maintenance personnel
Any good preflight begins with knowledge of: (click)
A thorough records review is the best way to gain in depth knowledge of your aircraft’s maintenance history. Use all resources available to you: logbooks and records, maintenance manuals, ADs, service letter and bulletins as well as any repair and alteration history found on FAA 337 forms. Your mechanic can assist you as well as a type club member or the local FAASTeam representative can be a good resource. (click)
Intimate knowledge of the aircraft’s systems and components and how they operate and interact is invaluable when trying to troubleshoot an anomaly you discover. (click)
All aircraft have areas that are more prone to failure or that require more maintenance than other areas. A thorough records review will bring those items and areas to light. Your maintenance technician can also shed some light on this also as well as a type club. Type clubs usually have a vast knowledge of the idiosyncrasies of the particular aircraft they represent. (click)
Having a good relationship with your maintenance technician is invaluable. The AMT is a wealth of information and a resource that you should tap. Ask questions before any major repairs or alterations are started to ensure the AMT is qualified and has the experience to perform the work. Building a good relationship with your AMT will make it easier for you to learn more about your aircraft it will make it easier for you to point out items that you are unsure of or that may need some corrective action.
Knowledge is power. With this power you can perform Preflight inspections with the confidence that you can and will find any discrepancies prior to flight where they can be corrected without a risk to you or your passengers.
The handout Advanced Preflight M-Pamphlet has information about how to do a records review and an addition items checklist for your preflight inspection.
Click to advance slide.
9/18/2018

88. GOING BEYOND THE PREFLIGHT INSPECTION
Prepare for the unexpected.
Make plans on how to deal with problems
Use Risk Management to mitigate the risks and the consequences.
Break the links in the accident chain before you ever get in the aircraft.
When planning your flight review everything closely plan your alternate airports and look for areas that could be used as emergency landing sites. (click)
Plan ahead for things that may happen. i.e. engine failure. Think about what you would need to do and be prepared to do it. It is best to have a plan and to do the plan when needed instead of having an emergency and then trying to come up with a plan. Valuable time is wasted devising a plan after the need for one arises. (click)
Use your risk management skills to mitigate your exposure to risk. Ask yourself is the risk too high due to the weather? Is the risk too high due to a component that is inoperative? Is the risk too high because you are not feeling well? Use decisions that help to eliminate the risk or to mitigate it to acceptable levels. (click)
Break the links in the accident chain. As the pilot in command you are the last link in the chain. That does not mean you can’t find problems and break the links further up the chain to avoid the possibility of having to use the last link to avoid a catastrophe.
Click to advance slide.
9/18/2018

89. GOING BEYOND THE PREFLIGHT INSPECTION
We have covered many things in the previous slides to increase your knowledge about your preflight inspection.
Do you think you are ready to fly now?
Click to advance slide.
9/18/2018

90. GOING BEYOND THE PREFLIGHT INSPECTION
REVIEW
Accident Data
Preflight Inspection and Reviewed the Results
Tips to Assist in Performing a Preflight
Records That the Pilot/Owner Should Review
Click to advance slide.
9/18/2018

91. GOING BEYOND THE PREFLIGHT INSPECTION
Any Questions or Discussions?
Click to advance slide.
9/18/2018

92. 9/18/2018