1. Optocoupler New Product Update
Opto Product Line Marketing
July 2014

2. Optocoupler, Optoisolator, Optoinsulator
Opto interface components have three fundamental functions:
Coupling - Signal & Power
- Current Transfer Ratio (CTR): gain as a function of LED current and load
- Transfer speed: bandwidth, rise & fall time, prop delay time, PWD
Power control: large signal
Isolation
Noise rejection: CMTI , PSR, reverse coupling
Insulation
- Safety: working voltage - application, pollution degree, installation category, creepage, clearance, CTI
- Agency certification and compliance: VISO, partial discharge, hipot
PSR=Power Supply Rejection. PSR is a major source of rejection. Can cause LED or amp to turn on when not supposed to causing an output error.

3. Signal Coupling Signal Coupling (Many Packages):
- Phototransistor - DC & AC input, FOD, CNY, MOC, 4N, H11
- Photo Darlington
Threshold Detection:
- AC & DC - MID400, HCPL3700
- Power Supply Feedback - FOD27xx
Logic Coupling (3.3 V & 5 V):
- Split Phototransistor - 6N135M/6M, HCPL25xxM
- Split Photo Darlington - 6N138M/9M, HCPL27xxM
- Logic Low Speed - H11LxM/H11NxM,
- Logic High-speed - 6N137M, HCPL06xx, HCPL26xxM, FOD06x0
- Logic in/out High-speed - FOD07x0, FOD8001,
- Bi-Directional, Logic in/out High-speed - FOD8012

4. Power Coupling High Voltage DC >100 V: - H11Dx - MOC8204 (400 V)
High Voltage AC < 1000 V:
- TRIAC Drivers - Random Phase, MOC301xM/2x/5x
- TRIAC Drivers - zero voltage detection, MOC303xM/4x/6x/8x
- High dv/dt TRIAC driver Random, FOD42xx
- High dv/dt TRIAC driver zero voltage detection, FOD41xx
High Current IGBT/MOSFET Gate Drivers:
- FOD3120, FOD3180, FOD3182, FOD3184, FOD8320, FOD8321
High Current Smart IGBT/MOSFET Gate Drivers:
- FOD8316, FOD8318, FOD8332

5. New Products Gate Driver Optocouplers
FOD8316/8318(Smart Gate Drive Opto)
FOD8332/8333 (Direct Drive LED Smart Gate Drive Opto)
FOD8320/8321/8384/8314*(Gate Drive Opto in Wide Body SO5)
High Speed Optocouplers
FOD8012 (Bi-Directional High Speed Opto)
FOD8160 (High Speed Opto in Wide Body SO5)
Standard Optocouplers (OptoHiTTM Series 125ºC Phototransistor)
FODM8801x Series
* To be released soon, sampling now

6. Optocoupler Constructions
Over-Under Construction
Advantages
Better predictability for CTR due to the light path
Stable isolation gap (thickness through insulation), thus consistent high input-output Viso
High Common Mode Noise Rejection (CMR); low capacitive charge buildup
Detector Chip
Light Blocking
Epoxy Outer Mold
Input
Leadframe
Emitter Chip
IR Transparent
Epoxy Inner Mold
Output
Coplanar Construction
Emitter Chip
Reflector
Detector Chip
Light Blocking
Epoxy Outer Mold
IR Transparent
Material
Input
Leadframe
Output
Leadframe

7. FAIRCHILD Optoplanar® Technology
The high-speed and gate drive optocoupler families utilize Fairchild’s proprietary Optoplanar® coplanar packaging technology, and optimized IC design to guarantee minimum 20 kV/μs Common Mode Rejection (CMR).
Competitive Advantages:
High Common Mode Noise Rejection (CMR). This construction minimizes the capacitive charge buildup that occurs in the over-under construction.
Fixed isolation gap (thickness through insulation) for a consistent high input to output isolation voltage.
The High-Speed and Gate Drive series are packaged in Fairchild’s patented coplanar packaging technology called Optoplanar®, and using optimized IC design to guarantee 20kV/µs minimum Common Mode Noise Rejection rating. This co-planar packaging eliminates the capacitive charge buildup, and thus reduces package capacitance by more than 30% compared to competitive solutions, which uses the over-under construction. In addition the fixed isolation gap, as defined by the thickness through insulation, provide a consistently high input to output isolation voltage. These competitive advantages will further differentiate us from our competitors, especially when used in noisy industrial environments.
Positioned as high CMR, provides a credible edge over competitive alternatives; high CMR is a consistent value-added message from Product Line to the field and end customers. For in depth knowledge about CMR, please refer to an application article titled “Optocoupler Common Mode Rejection (CMR)” by John Constantino, Strategic Marketing Manager, Fairchild Semiconductor Corp., Optoelectronics Division.

8. Optocoupler Product Areas
Gate Driver Optocouplers
High Speed Optocouplers
Standard Optocouplers (OptoHiTTM Series 125℃ Phototransistor)

9. Applications Motor Drives Industrial Inverters Solar Power Inverters
Uninterruptible power supplies (UPS)
Induction Heating
Isolated IGBT Drive

10. Low Voltage Inverter

11. Solar Inverter

12. Uninterruptible Power Supply (UPS)

13. Rice Cooker/Table Top Cooker

14. Gate Driver Optocoupler Selection Table
Part Number
Package
IFLH (Max) (mA)
IDDL, IDDH (Max) (mA)
IOL, IOH (Min) (A)
tPHL, tPLH (Max) (ns)
PWD (Max) (ns)
VUVLO+ (Typ) (V)
VUVLO- (Typ) (V)
CMR (Min) (kV/µs)
VISO (Min) (V)
TOPR (Min) (°C)
TOPR (Max) (°C)
FOD3120
MDIP 8L
5.0
3.8
2.0
400
100
12.7
11.2 35
5000
-40
FOD3150
1.0
500
300 20
FOD3180
8.0
6.0
200 65
8.3
7.7 10
FOD3182
7.5
4.0
2.5
210
FOD3184
3.5
13.0
11.5
FOD8320
SO 5L WB
FOD8321
FOD8384
FOD8316
SO 16L WB NA
3.0
10.0
4243
FOD8318
FOD8332
7.0
250
11.7
10.7
FOD8333

15. FOD3120, FOD3150 High Noise Immunity, 2. 5 A/1
FOD3120, FOD3150 High Noise Immunity, 2.5 A/1.0 A Output Gate Drive Optocoupler
Features
High output current capability:
- 2.5 A for FOD3120, Vcc = 30 V
- 1.0 A for FOD3150, Vcc = 30 V
Low Current Consumption, ICCH, ICCL
- FOD3120 – 3.8 mA
- FOD3150 – 5.0 mA
High speed response:
- FOD3120 – 400 ns max. prop. delay
High common mode noise immunity (CMR) 35 kV/us minimum allowing these devices to operate in noisy industrial environments
5000 VACrms isolation voltage rating
Safety Agency Approvals: UL1577, and DIN_EN/IEC (VDE0884)
>8mm creepage and clearance distance (option T)
Benefits:
Capable of driving 800 V/20 A IGBT in industrial applications
High speed response to limit power dissipation during MOSFET switching
Enhance Fairchild’s comprehensive offering of power-optimized products to offer designers a total mW-to-kW solution
Target Markets:
Industrial - DC/DC Converter, SMPS, UPS, motor control inverter/servo, solar inverter
Consumer - plasma display panel

16. FOD3182, FOD3184 High Speed, 2.0 A/3.0 A Output Gate Drive Optocoupler
Features:
250 kHz Max. Switching Speed
High Speed Switching
- 210 ns max. prop. delay
- 65 ns max. PWD
3 A output current Vcc = 30 V
Wide Vcc Operating Range Up to 30 V
3.3 mA, Low Current Consumption
8 V (FOD3182), 12 V (FOD3184)
High common mode noise immunity (CMR) 35 kV/us minimum allowing these devices to operate in noisy industrial environments
Safety Agency Approvals: UL1577, 5 kVACRMS and DIN_EN/IEC
1,414 V peak working voltage
Benefits:
Capable of driving 800 V/20 A IGBT in industrial applications
High speed response to limit power dissipation during MOSFET switching
Enhance Fairchild’s comprehensive offering of power-optimized products to offer designers a total mW-to-kW solution
Target Markets:
High Performance UPS
High Speed Driving Power MOSFET/IGBT
Industrial Power Supply - DC/DC Converter, SMPS

17. Competitor Part Number
8Pin DIP Selection
Fairchild Part Number
Competitor Part Number
IFLH (Max) (mA)
IDDL, IDDH (Max) (mA)
IOL, IOH (Min) (A)
tPHL, tPLH (Max) (ns)
PWD (Max) (ns)
VUVLO+ (Typ) (V)
VUVLO- (Typ) (V)
CMR (Min) (kV/µs)
VISO (Min) (V)
TOPR (Min) (°C)
TOPR (Max) (°C)
FOD3120
HCPL-3120, HCPL-J312, TLP350, TLP358
5.0
3.8
2.0
400
100
12.7
11.2 35
5000
-40
FOD3150
HCPL-3140, HCPL-3150
1.0
500
300 20
FOD3180
HCPL-3180
8.0
6.0
200 65
8.3
7.7 10
FOD3182
N.A.
7.5
4.0
2.5
210
FOD3184
TLP352
3.5
13.0
11.5

18. FOD8320, High Noise Immunity, 2
FOD8320, High Noise Immunity, 2.5 A Output Current, Gate Drive Optocoupler
Optoplanar® Technology Wide Body 5-Pin SOP
Features:
Optoplanar® packaging technology allows more than 10 mm Creepage and Clearance Distance, and 0.5 mm insulation distance to achieve reliable and high voltage insulation
Safety and regulatory approvals
UL1577, 5,000 VRMS for 1 min.
DIN-EN/IEC , 1,414 Vpeak working voltage, 8,000 Vpeak transient isolation voltage rating
High performance equivalent to FOD3120
2.5 A output current driving capability for medium power IGBT/MOSFET; Use of P-Channel MOSFETs at output stage enables output voltage swing close to the supply rail
35 kV/μs Minimum Common Mode Rejection
Fast Switching Speed over full operating temperature range
400 ns max. propagation delay
100 ns max. pulse width distortion
UnderVoltage LockOut (UVLO) with hysteresis
Extended industrial temperate range, -40 to 100°C VO
VDD
VEE
CATHODE
ANODE 4 5 6 1 3

19. New Package Development: Wide Body 5-Pin SOP, Saving Board Space

20. FOD8321, 2.5 A Output Current, Gate Drive Optocoupler
Optoplanar® Technology Wide Body 5-Pin SOP
Features:
Optoplanar® packaging technology allows more than 8 mm Creepage and Clearance Distance, and 0.5 mm insulation distance to achieve reliable and high voltage insulation
Safety and regulatory approvals
UL1577, 5,000 VRMS for 1 min.
DIN-EN/IEC , 1,414 Vpeak working voltage, 8,000 Vpeak transient isolation voltage rating
A output current driving capability for medium power IGBT/MOSFET; Use of P-Channel MOSFETs at output stage enables output voltage swing close to the supply rail
20 kV/μs Minimum Common Mode Rejection
Fast Switching Speed over full operating temperature range
500 ns max. propagation delay
300 ns max. pulse width distortion
UnderVoltage LockOut (UVLO) with hysteresis
Extended industrial temperate range, -40 to 100°C VO
VDD
VEE
CATHODE
ANODE 4 5 6 1 3

21. FOD8384, 2.5 A Output Current, High Speed Gate Drive Optocoupler
Optoplanar® Technology Wide Body 5-Pin SOP
New Product Release
Features:
Optoplanar® packaging technology allows more than 8 mm Creepage and Clearance Distance, and 0.5mm insulation distance to achieve reliable and high voltage insulation
Safety and regulatory approvals
UL1577, 5,000 VRMS for 1 min.
DIN-EN/IEC , 1,414 Vpeak working voltage, 8,000 Vpeak transient isolation voltage rating
High performance equivalent to FOD3184
2.5 A output current driving capability for medium power IGBT/MOSFET; Use of P-Channel MOSFETs at output stage enables output voltage swing close to the supply rail
35 kV/μs Minimum Common Mode Rejection
Fast Switching Speed over full operating temperature range
210 ns max. propagation delay
65 ns max. pulse width distortion
UnderVoltage LockOut (UVLO) with hysteresis
Extended industrial temperate range, -40 to 100°C VO
VDD
VEE
CATHODE
ANODE 4 5 6 1 3

22. New Package Development: Wide Body 5-Pin SOP, Saving Board Space

23. Wide Body SO5 Selection Fairchild Part Number Competitor Part Number
IFLH (Max) (mA)
IDDL, IDDH (Max) (mA)
IOL, IOH (Min) (A)
tPHL, tPLH (Max) (ns)
PWD (Max) (ns)
VUVLO+ (Typ) (V)
VUVLO- (Typ) (V)
CMR (Min) (kV/µs)
VISO (Min) (V)
TOPR (Min) (°C)
TOPR (Max) (°C)
FOD8320
HCNW-3120, ACNW-3130
5.0
3.8
2.0
400
100
12.7
11.2 35
5000
-40
FOD8321
ACPL-K312, TLP700F
7.5
500
300 20
FOD8384
ACPL-W340, ACPL-W341, ACPL-W343, TLP705AF
2.5
210 65
13.0
11.5

24. FOD8316 Smart Gate Drive Optocoupler
Features:
Improved performance and Cost efficient equivalent to HCPL-316J; pin-to-pin compatible
Protection Circuits for Both Conventional and Sense IGBTs
Programmable Fault Sensing
Desaturation Detection
Undervoltage Lockout Optimized for IGBT’s
Negative Gate Drive Capability
Cost Effectively Drives Power MOSFETs and Bipolar Transistors
Safety and regulatory approvals
- UL1577, 4,243 VRMS for 1 min.
- DIN-EN/IEC , 1,414 Vpeak working voltage , 8,000 Vpeak transient isolation voltage rating

25. FOD8316 Functional Schematics

26. FOD8318 Smart Gate Drive Optocoupler with Active Miller Clamp
Features:
Improved performance and cost efficient equivalent to ACPL-33xJ (not pin-to-pin compatible but similar pinout to FOD8316 for easy upward integration)
Active Miller Clamp
Protection Circuits for Both Conventional and Sense IGBTs
Programmable Fault Sensing
Desaturation Detection
Undervoltage Lockout Optimized for IGBT’s
Negative Gate Drive Capability
Cost Effectively Drives Power MOSFETs and Bipolar Transistors
Safety and regulatory approvals
- UL1577, 4,243 VRMS for 1 min.
- DIN-EN/IEC , 1,414 Vpeak working voltage, 8,000 Vpeak transient isolation voltage rating

27. FOD8332/FOD8333 Smart Gate Drive Optocoupler with Input LED Drive
New Product Release
Features
Improved performance to
ACPL-33xJ (functional and pin compatible)
Input LED drive to facilitate ease of receiving digitally encoded signals from PWM output
Desaturation Detection
Programmable Fault Sensing
Undervoltage Lockout Optimized for IGBTs
Active Miller Clamp to shut off the IGBT during high dv/dt without needing a negative supply voltage
FOD8332 (Input IF Reset) and FOD8333 (Auto-Reset)
Safety and regulatory approvals
UL1577, 4,243 VRMS for 1 min.
DIN-EN/IEC , 1,414 Vpeak working voltage, 8,000 Vpeak transient isolation voltage rating

28. New Package Development: Higher Integration
Wide Body SO-16
Allowing creepage and clearance distance of >8 mm

29. Competitor Part Number
Wide Body SO16 Selection
Fairchild Part Number
Competitor Part Number
IFLH (Max) (mA)
IDDL, IDDH (Max) (mA)
IOL, IOH (Min) (A)
tPHL, tPLH (Max) (ns)
PWD (Max) (ns)
VUVLO+ (Typ) (V)
VUVLO- (Typ) (V)
CMR (Min) (kV/µs)
VISO (Min) (V)
TOPR (Min) (°C)
TOPR (Max) (°C)
FOD8316
HCPL-316J NA
3.0
2.5
500
300
11.5
10.0 35
4243
-40
100
FOD8318
N.A.
FOD8332
ACPL-331J, ACPL-332J
7.0
5.0
250
11.7
10.7
FOD8333
ACPL-330J, ACPL-333J

30. Value Propositions
The gate driver optocouplers offer superior switching performance, lower power consumption and superior common mode transient immunity compared to competitive devices on the market.
Fairchild’s gate driver optocoupler family employs PMOS power transistor for the pull-up. Utilization of the PMOS transistor results in reduced power consumption within the optocoupler due to its ~1.5 Ω RDS(ON). This compares to ~7.5 Ω RDS(ON) for competitive products that utilize bipolar (triple darlington) pull-ups.
The newer, wide-body SO5, SO16, and DIP8 “T” packages provide wider (>10 mm) clearance and (>8 mm) creepage distances along with a working voltage (UIORM) of 1,414 V peak and transient isolation voltage of 8,000 V peak. These packages offer an equivalent to Avago’s HCNW wide body type of optocouplers.

31. Safety Agency Certification
UL 1577 approved
- File #E90700, Volume 2
- UL approval comes standard with all Fairchild optocouplers
VDE approved DIN_EN/IEC
- File #
- Order option ‘V’ for certification
- FOD83xx approved to DIN_EN/IEC

32. FOD8316 Evaluation Board (EVB)
The FOD8316 EVB with a booster circuit is designed for the evaluation of FOD8316 timing sequence and AC test performance, when driving IGBT power module. The user guide is recommended to be used in conjunction with the datasheet.

33. FOD8316 EVB Circuit Schematic2
J13
J11
J12
Vdd2
J15 Vs
TP9
TP6A
TP6 J8
J14 J1 Ve +
C13
10uF
35V J2
TP1
TP2
TP1A
TP5
TP3
TP4 J3
TP10
TP6B
TP5A
TP11
TP12
TP8
TP7
Desat
VIN+
VIN-
VDD1 3
GND1 4
RESET 5
FAULT 6
VLED1+ 7
VLED1- 8
VSS 9 10 VO 11 VS 12
VDD2 13
DESAT 14
VLED2+ 15 VE 16 U1
FOD8316
Vss C3
0.1uF
C11
4.7uF C1
Reset
Fault
Gnd1 D1
Ddesat R1 1K C2
330pF
Vdd1 Q1
MJD44H11 Q2
MJD45H11
C12
51nF
Vo2
Vo1
Rg1
2.4 R3 NC
Rg2
Rg3 R2
C10 C9 C8
10nF
C14 C4 C5 C6 C7
100pF
Vin+
Vin- R4 J5 J6 D2 J7
J10 J9

34. Opto Product Areas Gate Driver Optocouplers High Speed Optocouplers
Standard Optocouplers (OptoHiTTM Series125℃ Phototransistor)

35. High Speed Logic Gate Optocouplers

36. FOD8012 - Bi-Dir Digital Optocoupler Excellent Noise/EMI Immunity
By combining the reliable isolation, high integration of 2 optocoupler channels in bi-directional configuration, excellent noise immunity characteristics of an optocoupler with the high data rate capability, the FOD8012 allows system engineers to design a robust system, with low transmission error rate, low system failure rate, a proven reliability over extended periods of time required for Industrial systems, at a low cost of design and component.

37. Value Propositions (1)
Optoplanar® coplanar packaging technology enables this higher integration and offers the best-in-class common mode transient immunity; 20 kV/µs minimum allowing these devices to operate in noisy industrial environments (100% better than our closest competitors)
Full Duplex, Bi-Directional configuration supports isolated communications of digital signals between systems without conducting ground loops or hazardous voltages.
3.3 V or 5 V supply voltage facilitates logic level translation
High isolation voltage, featuring > 0.4 mm isolation gap, certified by UL1577 and DIN_EN/IEC (VDE0884) certification for increased reliability

38. Value Proposition (2)
Simplify system design of high-speed data signals isolation at bus interfaces, such as Profibus, CAN, DeviceNet, other fieldbus standards, RS485, I2C, SPI, USB, etc.
The application circuit illustrated an isolated Profibus or RS485 interface between the controller and the transceiver chips. Evaluation module is available upon request.
The application circuit illustrated an isolated Controlled Access Network interface between the controller and the transceiver chips. Evaluation module is available upon request.

39. FEBFOD8012_CAN Evaluation Module (1)
This evaluation module illustrates an isolated CAN interface comprising of the Bi-Dir Optocoupler, FOD8012, and the CAN transceiver IC.
V DIFF(CANH-CANL)
VCANH
VCANL
Notes:
Scopeshots of the CAN transceiver outputs, VCANH and VCANL, and its differential output.
The overshoots in signals, CANH and CANL, are inherent to the CAN Transceiver, LT1796 (Linear Technology)
Input signal at VINB(TX) =62.5 kHz square wave; 50% duty cycle; Amplitude: 0->3.3 V.

40. FEBFOD8012_RS485 Evaluation Module (2)
This evaluation module illustrates an isolated Profibus or RS485 interface comprising of the Bi-Dir Optocoupler, FOD8012, and the RS485 transceiver IC.
VDiff(A-B) VA VB
Notes:
Scopeshots of the RS485 transceiver outputs, VA and VB, and its differential output
Input signal at VINB(TX) =1.25 MHz square wave, 50% duty cycle, Amplitude: 0 to 5.0 V.

41. FOD8160 High Noise Immunity Logic Gate Optocoupler in Wide Body 5-Pin SOP
>10 mm creepage and clearance
Safety and regulatory approvals
- UL1577, 5,000 VRMS for 1 min. (Viso)
DIN-EN/IEC , 1,414 V peak working voltage (Uiorm), 8,000 Vpeak transient
isolation voltage rating (Uiotm)
10 Mbps data rate
Open Collector Output
3.3 V or 5 V supply voltage facilitates logic level translation
20 kV/μs Minimum CMTI
Enhanced performance over extended operating
Industrial temperature range up to 100ºC
Small size footprint enhances board space saving

42. Isolating SiC Driver
FOD8160

43. Optically Isolating Intelligent Power Module
FOD8160
SPM Smart Power Module

44. High-Speed Optocoupler Driving the Low-Side Gate Driver for IGBT Control

45. Opto Product Areas Gate Driver Optocouplers High Speed Optocouplers
Standard Optocouplers (OptoHiTTM Series 125℃ Phototransistor)

46. FODM8801 Series OptoHiTTM 125ºC Phototransistor
The OptoHiT™ trademark denotes Optocoupler High Temperature, utilizes Fairchild’s leading edge patented process technology to achieving high operating temperature characteristics, up to 125°C. The first optocoupler in OptoHiT™ Series, FODM8801, consists of an aluminum gallium arsenide (AlGaAs) infrared light emitting diode optically coupled to a phototransistor, in a compact half pitch, mini-flat, 4-pin package. It sets various benchmarks in guaranteeing Current Transfer Ratio (CTR) and switching performance across extended operating temperature range.

47. Value Propositions of OptoHiTTM Optocouplers
High efficiency emitter and tight hfe binning of transistor result in Guaranteed Current Transfer Ratio (CTR) specifications across full temperature range from -40℃ to +125℃
Excellent CTR linearity at high temperature
CTR at very low input current, IF (1 mA, 1.6 mA, and 3 mA)
Guaranteed switching specifications over extended operating temperature range as compared to the existing optocouplers
Owing to its small footprint, this half-pitch Mini-Flat Package (MFP) can further save on board real estate giving hardware designers more flexibility and allowing for overall systems cost savings
High isolation voltage certified by UL1577 (3,750 VACRMS for 1 min.) and DIN_EN/IEC (VDE0884) certification for increased reliability
245°C IR reflow soldering capability in lead free environments

48. Current Transfer Ratio Comparison
FODB101 (obsoleted)
FODM8801 Series
CTR linearity at
high temperature

49. Ordering Information

50. Parametric Comparison
Note:
1. FODM8801x has guaranteed CTR and switching specifications over extended operating temperature range. Other vendors only specify datasheet parameters at room temperature.
2. CTR selections are allowed.
3. All are in half-pitch Mini-Flat Package and certified by UL1577 (3,750 VACRMS for 1 min.).

51. Optocoupler Package 4-Pin Half Pitch MFP 4-Pin Full Pitch MFP
8-Pin SOIC
Wide Body 5-Pin SOIC
4-Pin DIP
6-Pin DIP
16-Pin SOIC
8-Pin DIP

52. Optocoupler Package Insulation
Package Description
Package code
Minimum Thickness through Insulation (mm)
VISO Test
Voltage
VAC(rms)
1 min.
Minimum
Creepage
Distance (mm)
Clearance
Distance
(mm)
4Pin Half Pitch Mini-Flat M1
0.5
2500 5
4Pin Full Pitch Mini-Flat M
3750
8Pin SOIC S
0.4 4
4Pin Dual in-line T
5300 7
6Pin Dual in-line Q
4170
8Pin Dual in-line (black) T1
8Pin Dual in-line (white) B
5000
DIP-8 (gate drivers) 8
7.4/10*
SO16 (gate drivers) E
4243
Stretch SO5 10

53. Cross Reference - Avago Technologies

54. High Performance Optocouplers (1)
Avago Fairchild
1MBd Transistor
HCPL-M452 FODM452
HCPL-M FODM453
HCPL-0452 HCPL0452
HCPL-0453 HCPL0453
HCPL-4502 HCPL4503M
HCPL-4503 HCPL4503M
HCPL-0500 HCPL0500
HCPL-0501 HCPL0501
HCPL-0530 HCPL0530
HCPL-0531 HCPL0531
HCPL-0534 HCPL0534
HCPL-2503 HCPL2503
HCPL-2530 HCPL2531M
HCPL-2531 HCPL2531M
HCPL-050L FOD050L
HCPL-053L FOD053L
HCPL-250L FOD250L
Avago Fairchild
6N Series 6N Series
100kBd Darlington Transistor
HCPL HCPL0701M
HCPL HCPL0701M
HCPL HCPL0731M
HCPL HCPL0731M
HCPL-2730 HCPL2731M
HCPL-2731 HCPL2731M
HCPL-070L FOD070L
HCPL-073L FOD073L
HCPL-270L FOD270L
The high performance optocouplers comprise of high speed transistor, logic gate, gate drive, isolation amplifier, or all other optocouplers with IC outputs. This segment is usually highly priced with better profit margin as compared to the commoditized Photo-Transistor type.
Fairchild, over the past 4 years, has built a credible portfolio of high performance optocouplers, but the revenue has not grown as fast as expected and thus is insignificant compared to the closest competitors. We really need help from our Sales/FAE teams!
The objective is to capture a sizeable market share of more than 30% in 2 years’ time. Leveraging Fairchild’s extensive Sales/FAE network and marketing tools to win the Tier 1 and 2 accounts.

55. High Performance Optocouplers (2)
Avago Fairchild
10MBd Logic Gate Output
HCPL-060L FOD060L
HCPL-063L HCPL062N
HCPL-260L FOD260L
ACPL-M60L FODM8061
ACPL-W50L FOD8160
ACPL-W60L FOD8160
15MBd Logic Gate Output
ACPL-M75L FODM8071
ACPL-W70L FOD8160
25MBd CMOS Logic Gate
HCPL-0710 FOD0710
HCPL-0720 FOD0720
HCPL-0721 FOD0721
ACPL-072L FOD8001
ACPL-072L (x2) FOD8012*
Avago Fairchild
10MBd Logic Gate Output
HCPL-0600 HCPL0600
HCPL-0601 HCPL0601
HCPL-0611 HCPL0611
HCPL-2601 HCPL2611M
HCPL-2611 HCPL2611M
HCPL-0630 HCPL0637
HCPL HCPL0638
HCPL-0661 HCPL0639
HCPL-2630 HCPL2631M
HCPL-2631 HCPL2631M
HCPL-M611 FODM611
HCPL-M601 FODM611
HCPL-M600 FODM611
After the launch of the FOD8001, we have planned to roll out a series of 3.3V/5V logic gate optocoupler with high noise immunity in Mini-Flat 5-Pin package, as highlited in RED. They are improved replacement and fully compatible to our competitors such as Avago, NEC and Toshiba. So stay tuned.
Currently in development, we have a few highly differentiated products and plan to roll out in year These new products will help establish Fairchild as a leader in optocoupler.

56. High Performance Optocouplers (3)
Avago Fairchild
Gate Driver Optocoupler
HCPL FOD3120
HCPL-J312 FOD3120
HCPL FOD3150
HCPL-J314 FOD3150
HCPL FOD3150
ACPL-T350 FOD3150A
HCPL FOD3182
HCPL FOD3184
HCPL-316J FOD8316
ACPL-331J/332J FOD8332
ACPL-330J/333J FOD8333
ACPL-W340 FOD8384
ACPL-W341 FOD8384
ACPL-W343 FOD8384
After the launch of the FOD8001, we have planned to roll out a series of 3.3V/5V logic gate optocoupler with high noise immunity in Mini-Flat 5-Pin package, as highlited in RED. They are improved replacement and fully compatible to our competitors such as Avago, NEC and Toshiba. So stay tuned.
Currently in development, we have a few highly differentiated products and plan to roll out in year These new products will help establish Fairchild as a leader in optocoupler.

57. THANK YOU