1. LEDlescentTM T8 Ballast-Free Lamps

2. North American Market – T8 LED Options
Replacement Lamps (UL Type A)
SYLVANIA SubstiTUBE®
Advantage: Energy savings; Minimal labor costs for installation, Cost
Disadvantage: Ballast compatibility, Higher maintenance costs due to remaining life of existing ballast
Internal Driver Line Voltage Lamps (UL Type B)
Single Ended
Not appropriate design:
No SYLVANIA product
Advantage: Cost, Energy savings, Low maintenance
Disadvantage: Shock hazard; Higher operating temperatures; Non-passive failure of improperly re-installed traditional lamps
Double-ended with switch
SYLVANIA LEDlescentTM
Advantage: Easy Installation, Cost, Energy savings, Low maintenance
Disadvantage: Small labor for rewiring
External Driver Lamps
(UL Type C)
SYLVANIA HE Kits / SubstiTUBE G8
Advantage: Energy savings; Safe design; Higher LPW capability; Longer life, Low maintenance, System solution
Disadvantage: Labor Cost (Initial & Maintenance)
Dual Technology (A&B)
Advantage: Uses the current ballast now, can keep working on line voltage later
Disadvantage: Single ended: shock hazard, Limited Ballast compatibility
Deferred maintenance for limited budgets, direct wire as ballast fails

3. LEDlescent™ T8 Ballast-Free Lamps
Ballast free lamps available in 2, 3 and 4 foot options
Provide instant light and uniform light distribution.
Double ended wiring schematic ensure safe installation
Long life: 50,000 hours (L70)
Power supply: No ballast needed, installed directly on V
Uses either shunted or un-shunted sockets
Versatile option for both T8 and T12 fixtures
Warranty:
5-year limited lamp warranty (24/7 operation)
Shape
Wattage
Lumens
CCT (K)
4ft
17W
2100lm
2200lm
3000K/3500K
4100K/5000K
14W
1700lm
1800lm
3ft
12W
1650lm
2ft 9W
1100lm
Applications
General lighting
Cove Lighting
Display Case
Parking Garage
Tunnels

4. LEDlescent™ T8 Ballast-Free Lamps
Features and benefits
Double Ended – wiring schematic requires line wired to one end and neutral to the other eliminating any shock hazard associated with single ended direct wire tubes.
Less expensive to install than single ended. No polarity - can be installed into any fixture in any direction.
No Ballast Required - wired directly into V bypassing the existing ballast that may fail or may not be compatible.
Lower cost of ownership than Type A lamps with potential ballast replacement.
Flexible - compatible with both shunted and non-shunted sockets, removing the expense of replacing the existing sockets.
Replaces medium bi-pin T8 or T12 fluorescent lamps in existing fixtures.
Economical Simple Installation in 5 minutes and 20 seconds for a 4-lamp fixture.
Reliable Long Life - 50,000 hour expected life; not dependent on the life of an existing ballast like Type A lamps.
4-foot Type B Lamps will meet the DLC rating.

5. LEDlescent™ T8 Ballast-Free Lamps Wiring Diagram
Open until both ends are engaged in the socket; prevents shock
LINE
NEUTRAL
Safety “switch” technology prevents current across the lamp when only one end is engaged
“Double Ended” - Wire Line to one end, Neutral to the other
No polarity: lamp can be installed in either direction
Different than other models on the market (single ended, shock hazard)
No issues with installing fluorescent lamps back into fixture (no light, burn out coil)
Name indicates lamp is different than SubstiTUBE (no ordering mistakes)

6. LEDlescent™ T8 Ballast-Free Lamps - Installation
Installation requires that a caution / warning sticker be applied
Indicates fixture was modified.
Informs any person after initial modification that this is no longer suitable to operate fluorescent lamps.
Provides information on appropriate lamp for modified fixture
LED17T8/L48/FG/841/BF

7. LEDlescent™ T8 Ballast-Free Lamps - Installation
Each box of lamps contains an installation guide
Contains warnings and cations and details of wiring schematic / diagram for 1-4 lamp scenarios.

8. LEDlescent™ T8 Ballast-Free Lamps
4ft Product Offering
Item Number
Ordering Description
Lamp
Wattage
Replaces
CCT
Lumens
Life
Beam Angle
DIM
DLC
75024
LED17T8/L48/FG/830/BF 17
32W
3000K
2100
50,000
220° No
Yes
75025
LED17T8/L48/FG/835/BF
3500K
75026
LED17T8/L48/FG/841/BF
4100K
2200
75027
LED17T8L48/FG/850/BF
5000K
75020
LED14T8L48/FG/830/BF 14
1700
75021
LED14T8L48/FG/835/BF
75022
LED14T8L48/FG/841/BF
1800
75023
LED14T8L48/FG/850/BF

9. LEDlescent™ T8 Ballast-Free Lamps
2ft & 3ft Product Offering
Item Number
Ordering Description
Lamp
Wattage
Replaces
CCT
Lumens
Life
Beam Angle
DIM
DLC
75009
LED12T8/L36/FG/830/BF 12
32W
3000K
1650
50,000
220° No -
75010
LED12T8/L36/FG/835/BF
3500K
75011
LED12T8/L36/FG/841/BF
4100K
75012
LED12T8/L36/FG/850/BF
5000K
75013
LED9T8/L24/FG/830/BF 9
1100
Yes
75014
LED9T8/L24/FG/835/BF
75015
75016

10. Key TAKE AWAYS Safe solution minimizing risk
No ballast compatibility issues
Larger Case Size – 25 pack

11. Thank YOu