Presentation is loading. Please wait.

Presentation is loading. Please wait.

HP Virtual Connect Interoperability Matrix

Published byJan Kolář Modified over 6 years ago

Similar presentations

Presentation on theme: "HP Virtual Connect Interoperability Matrix"— Presentation transcript:

1 HP Virtual Connect Interoperability Matrix
Version 1.4

2 Disclaimer The purpose of this matrix is to help field people to avoid mistakes while connecting VC Ethernet Modules to external LAN switches. This document can change as soon as I get some new details, so come and check it form time to time! All the information were collected either via the web (ProCurve.com, Cisco.com, Finsiar.com…), internal documents (.pdf, .doc…).

3 HP Virtual Connect Flex-10

4 HP Virtual Connect Flex-10 10Gb Ethernet Module
16x 10GBASE-KR Ethernet – Connects to one (1Gb or 10Gb) NIC in each HH blade bay 2x 10Gb Ethernet – Cross-link between adjacent VC-Enet modules Mgmt Interfaces to Onboard Administrator (Enet & I2C) MidPlane: 1x 10GBASE-CX4 Ethernet or 1x SFP+ module (X1) 5x SFP+ modules (X2-6) (1GbE or 10GbE) 2x Crosslinks (midplane) or 2x SFP+ module (X7-8) Port Number & Status Indicators Indicates whether a data center link (green), stacking link (amber), or highlighted port (blue). Recessed module reset button

5 Flex-10 Shared Port Operation: CX4 and X1
Port X1 (10BASE-CX4) is shared with Port X1 (SFP+) You can have either the CX-4 port active or the SFP+ port active and the triangle LED underneath each port indicates which port is active. The SFP+ port always has precedence over the CX4 port: • If there is a module installed in the SFP+ port, the SFP+ port is the active port. • If there is no module installed in the SFP+ port, the CX4 port is the active port.

6 Flex-10 Shared Port Operation: X7 and X8
• Port X7 (SFP+) and port X8 (SFP+) are each shared with two internal 10Gb cross-link. Either the port is active or the internal cross-link is active, but not both. Port X7 is shared with internal cross-link 1, and Port X8 is shared with internal cross-link 2. • If there is a module installed in the SFP+ port, the SFP+ port is the active port. • If there is no module installed in the SFP+ port, and the port has not been configured as an uplink in a VC Ethernet network, then the internal cross-link is the active port. • If there is no module installed in the SFP+ port, and the port has been configured as an uplink in a VC Ethernet network, then the SFP+ port is the active port.

7 VC Flex-10: Connectivity Options
Flex-10 Interconnect Option Connector Image Connector Type Cable Needed Distance Covered RJ-45 SFP B21 RJ-45 CAT5/6 Copper Cable with RJ-45 connector 100mt SX 1Gb SFP B21 LC Multi-Mode FC Cable OM2/OM3 550mt (50/100µm) 10Gb SR SFP B21 300mt (with OM3) 10Gb LR SFP B21 Single-Mode FC Cable OM2/OM3 16/25Km 10Gb LRM SFP B21 260mt (with OM3)

8 VC Flex-10: Direct Attach Cable
Direct Attach Cable (DAC) is a cable that has a built-in SFP+ transceiver on both ends There are many DAC Cables provided by various vendor; HP has two DAC Cables: ISS and ProCurve which are not exactly the same

9 Integrating Virtual Connect Flex-10 with HP ProCurve
Transition slide Integrating Virtual Connect Flex-10 with HP ProCurve [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{A72904B0-01BA-40C C7ABFB77FF}}

10 VC Flex-10 and ProCurve: Basic Rules
With VC firmware 2.30 it is also possible to use Procurve DAC Cables “B” version All ISS SFP+ DAC work in a ProCurve SFP+ switch All ISS SFP+ do not work in any ProCurve switches as ProCurve SFP+ carry “HP ID v2 signature”, and ISS transceivers have “HP ID v1 signature” All ProCurve SFP+ don’t work with VC Flex-10

11 VC Flex-10: ProCurve Connection
I have a Flex-10 with this Kit: Connector Image What ProCurve connector do I need? What Cable do I need? Comment RJ-45 SFP B21 RJ-45 CAT5/6 Copper Cable with RJ-45 connector It supports only 1000BaseT, doesn’t work with 10/100 SX 1Gb SFP B21 SFP LC/SC Multi-Mode FC Cable OM2/OM3 The Switch Port must have a ProCurve transceiver 10Gb SR SFP B21 SFP/SFP+/XFP/X2 10Gb SR 10Gb LR SFP B21 SFP/SFP+/XFP/X2 10Gb LR Single-Mode FC Cable OM2/OM3 10Gb LRM SFP B21 SFP/SFP+/XFP/X2 10Gb LRM

12 VC Flex-10: Direct Attach Cable
Valid for VC fw or above DAC Vendor Does it work with Virtual Connect? Does it work with ProCurve? Comment/Example HP ISS DAC Yes HP 0.5m SFP+ 10GbE Copper Cable B21 HP 1m SFP+ 10GbE Copper Cable B21 HP 3m SFP+ 10GbE Copper Cable B21 HP 7m SFP+ 10GbE Copper Cable B21 HP ProCurve DAC A* HP ProCurve 10-GbE SFP+ 1m DAC J9281A HP ProCurve 10-GbE SFP+ 3m DAC J9283A HP ProCurve 10-GbE SFP+ 7m DAC J9285A HP ProCurve DAC B HP ProCurve 10-GbE SFP+ 1m DAC J9281B HP ProCurve 10-GbE SFP+ 3m DAC J9283B HP ProCurve 10-GbE SFP+ 7m DAC J9285B * HP ProCurve DAC A is in shortage and will be obsolete soon

13 VC Flex-10: Direct Attach Cable
Valid for VC fw or below DAC Vendor Does it work with Virtual Connect? Does it work with ProCurve? Comment/Example HP ISS DAC Yes HP 0.5m SFP+ 10GbE Copper Cable B21 HP 1m SFP+ 10GbE Copper Cable B21 HP 3m SFP+ 10GbE Copper Cable B21 HP 7m SFP+ 10GbE Copper Cable B21 HP ProCurve DAC A* HP ProCurve 10-GbE SFP+ 1m DAC J9281A HP ProCurve 10-GbE SFP+ 3m DAC J9283A HP ProCurve 10-GbE SFP+ 7m DAC J9285A HP ProCurve DAC B No HP ProCurve 10-GbE SFP+ 1m DAC J9281B HP ProCurve 10-GbE SFP+ 3m DAC J9283B HP ProCurve 10-GbE SFP+ 7m DAC J9285B * HP ProCurve DAC A is in shortage and will be obsolete soon

14 Integrating Virtual Connect Flex-10 with Cisco
Transition slide Integrating Virtual Connect Flex-10 with Cisco [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{A72904B0-01BA-40C C7ABFB77FF}}

15 VC Flex-10 and Cisco: Basic Rules
All ISS SFP+ DAC work in Cisco Switches, but you have to tell the switch port to support an “unsupported” cable All Cisco DAC don’t work with Virtual Connect

16 VC Flex-10: Cisco Connection
I have a Flex-10 with this Kit: Connector Image What Cisco connector do I need? What Cable do I need? Comment RJ-45 SFP B21 RJ-45 CAT5/6 Copper Cable with RJ-45 connector It supports only 1000BaseT, doesn’t work with 10/100 SX 1Gb SFP B21 Cisco SFP SC/LC Connector Multi-Mode FC Cable OM2/OM3 The Switch Port must have a Cisco transceiver 10Gb SR SFP B21 SFP/SFP+/XFP/X2 10Gb SR 10Gb LR SFP B21 SFP/SFP+/XFP/X2 10Gb LR Single-Mode FC Cable OM2/OM3 10Gb LRM SFP B21 SFP/SFP+/XFP/X2 10Gb LRM

17 VC Flex-10: Direct Attach Cable
DAC Vendor Does it work with Virtual Connect? Does it work with Cisco? Comment/Example HP ISS DAC* yes HP 0.5m SFP+ 10GbE Copper Cable B21 HP 1m SFP+ 10GbE Copper Cable B21 HP 3m SFP+ 10GbE Copper Cable B21 HP 7m SFP+ 10GbE Copper Cable B21 Cisco DAC No Flex-10 checks manufacturer, 3rd party DAC are not allowed *To use ISS DAC cable within Cisco, you need to tell the switch to use an “unsupported” Cable Warning: many customers reported that Cisco stated they will not support DAC Cables longer than 5mt, so check this point with your customer if you need to use 7mt DAC cable

18 Integrating Virtual Connect Flex-10 with BNT/Nortel
Transition slide Integrating Virtual Connect Flex-10 with BNT/Nortel [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{A72904B0-01BA-40C C7ABFB77FF}}

19 VC Flex-10 and BNT/Nortel: Basic Rules
All ISS SFP+ DAC work in a BNT Switch

20 VC Flex-10: BNT/Nortel Connection
I have a Flex-10 with this Kit: Connector Image What BNT connector do I need? What Cable do I need? Comment RJ-45 SFP B21 RJ-45 CAT5/6 Copper Cable with RJ-45 connector It supports only 1000BaseT, doesn’t work with 10/100 SX 1Gb SFP B21 SFP with SC/LC Connector Multi-Mode FC Cable OM2/OM3 The Switch Port must have a BNT transceiver 10Gb SR SFP B21 SFP/SFP+/XFP/X2 10Gb SR 10Gb LR SFP B21 SFP/SFP+/XFP/X2 10Gb LR Single-Mode FC Cable OM2/OM3 10Gb LRM SFP B21 SFP/SFP+/XFP/X2 10Gb LRM

21 VC Flex-10: Direct Attach Cable
DAC Vendor Does it work with Virtual Connect? Does it work with BNT/Nortel? Comment/Example HP ISS DAC Yes HP 0.5m SFP+ 10GbE Copper Cable B21 HP 1m SFP+ 10GbE Copper Cable B21 HP 3m SFP+ 10GbE Copper Cable B21 HP 7m SFP+ 10GbE Copper Cable B21 BNT/Nortel DAC No Flex-10 checks manufacturer, 3rd party DAC are not allowed

22 HP Virtual Connect 1/10-F

23 HP Virtual Connect Ethernet Module
HP 1/10Gb-F VC-Enet Module MidPlane 16x 1Gb Ethernet–Connects to one NIC in each HH blade server bay 1x 10Gb–Cross-link between adjacent VC-Enet modules Mgmt Interfaces to Onboard Administrator 1x10Gb Ethernet (CX4) Port X1 2x10Gb Ethernet (XFP) Ports X2, X3 2x 1Gb Ethernet (SFP modules SX/RJ45) Ports S1 and S2 4x 1Gb Ethernet (RJ45) Ports 1, 2, 3, 4 Port Number & Status Indicators Indicates whether a data center link (green), stacking link (amber), or highlighted port (blue). Recessed module reset button ‘Next’ button (unused in initial release firmware)

24 VC 1/10-F: Connectivity Options
VC 1/10-F Interconnect Option Connector Image Connector Type Cable Needed Distance Covered RJ-45 SFP B21 Available only for port S1 and S2 RJ-45 CAT5/6 Copper Cable with RJ-45 connector 100mt SX 1Gb SFP B21 Available only for port S1 and S2 LC Multi-Mode FC Cable OM2/OM3 550mt (50/100µm) 10Gb SR XFP B21 Available only for port X2 and X3 300mt (with OM3) 10Gb LR XFP B21 Available only for port X2 and X3 Single-Mode FC Cable OM2/OM3 16/25Km

25 Integrating Virtual Connect 1/10-F with HP ProCurve
Transition slide Integrating Virtual Connect 1/10-F with HP ProCurve [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{A72904B0-01BA-40C C7ABFB77FF}}

26 VC 1/10-F: ProCurve Connection
I have a VC 1/10F with this Kit: Connector Image What ProCurve connector do I need? What Cable do I need? Comment RJ-45 SFP B21 RJ-45 CAT5/6 Copper Cable with RJ-45 connector It supports only 1000BaseT, doesn’t work with 10/100 SX 1Gb SFP B21 ProCurve SFP LC/SC Multi-Mode FC Cable OM2/OM3 The Switch Port must have a ProCurve SFP 10Gb SR XFP B21 SFP/SFP+/XFP/X2 10Gb SR The Switch Port must have a ProCurve module 10Gb LR XFP B21 SFP/SFP+/XFP/X2 10Gb LR Single-Mode FC Cable OM2/OM3

27 Integrating Virtual Connect 1/10-F with Cisco
Transition slide Integrating Virtual Connect 1/10-F with Cisco [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{A72904B0-01BA-40C C7ABFB77FF}}

28 VC 1/10-F: Cisco Connection
I have a VC 1/10-F with this Kit: Connector Image What Cisco connector do I need? What Cable do I need? Comment RJ-45 SFP B21 RJ-45 CAT5/6 Copper Cable with RJ-45 connector It supports only 1000BaseT, doesn’t work with 10/100 SX 1Gb SFP B21 SFP LC/SC Multi-Mode FC Cable OM2/OM3 The Switch Port must have a Cisco transceiver 10Gb SR XFP B21 SFP/SFP+/XFP/X2 10Gb SR 10Gb LR XFP B21 SFP/SFP+/XFP/X2 10Gb LR Single-Mode FC Cable OM2/OM3

29 Integrating Virtual Connect 1/10-F with BNT
Transition slide Integrating Virtual Connect 1/10-F with BNT [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{A72904B0-01BA-40C C7ABFB77FF}}

30 I have a VC 1/10-F with this Kit: What BNT connector do I need?
VC 1/10-F: BNT Connection I have a VC 1/10-F with this Kit: Connector Image What BNT connector do I need? What Cable do I need? Comment RJ-45 SFP B21 RJ-45 CAT5/6 Copper Cable with RJ-45 connector It supports only 1000BaseT, doesn’t work with 10/100 SX 1Gb SFP B21 SFP LC/SC Multi-Mode FC Cable OM2/OM3 The Switch Port must have a BNT transceiver 10Gb SR XFP B21 SFP/SFP+/XFP/X2 10Gb SR 10Gb LR XFP B21 SFP/SFP+/XFP/X2 10Gb LR Single-Mode FC Cable OM2/OM3

31 ProLiant Essentials Core Presentation
6/7/2005 Transition Slide Let’s Do Amazing! [Enter any extra notes here; leave the item ID line at the bottom] Avitage Item ID: {{5EAF182B-2F6D-4BE8-AB95-3D255F020DEE}} 9/19/2018 HP Restricted: For HP and Partner Internal use only Notes for Internal Use

Download ppt "HP Virtual Connect Interoperability Matrix"

Similar presentations

Cisco 3020 Switches Blade Chassis FC Switch FC Switch 3020

Cisco 3020 Switches Blade Chassis FC Switch FC Switch 3020
IBM Security Network IPS models, End of Support Dates and Replacement options 1.

IBM Security Network IPS models, End of Support Dates and Replacement options 1.
HP 6125G and HP 6125G/XG Ethernet Blade Switches

HP 6125G and HP 6125G/XG Ethernet Blade Switches
PowerEdge M-Series CMC Management

PowerEdge M-Series CMC Management
5.3 Ethernet connectivity and options. Unit objectives After completing this unit, you should be able to: List the BladeCenter components required for.

5.3 Ethernet connectivity and options. Unit objectives After completing this unit, you should be able to: List the BladeCenter components required for.
 Rebuild the Entire Network Infrastructure at KSS.  Install and Configure Numerous Access Points  Setup VLAN’s and a Guest wireless network.

 Rebuild the Entire Network Infrastructure at KSS.  Install and Configure Numerous Access Points  Setup VLAN’s and a Guest wireless network.
Networking Interconnects

Networking Interconnects
1 © 2004, Cisco Systems, Inc. All rights reserved. Wireless Access Points (WAPs) or (APs)

1 © 2004, Cisco Systems, Inc. All rights reserved. Wireless Access Points (WAPs) or (APs)
Dale E. Gary Professor, Physics, Center for Solar-Terrestrial Research New Jersey Institute of Technology 1 03/16/2012OVSA Preliminary Design Review.

Dale E. Gary Professor, Physics, Center for Solar-Terrestrial Research New Jersey Institute of Technology 1 03/16/2012OVSA Preliminary Design Review.
1 Fiber Optics FIBER OPTIC PATCH PANELS. 2 Fiber Optics Just like our copper cable plant the fiber cable plant incorporates many of the same hardware.

1 Fiber Optics FIBER OPTIC PATCH PANELS. 2 Fiber Optics Just like our copper cable plant the fiber cable plant incorporates many of the same hardware.
How to Build a CAN Last Update 2007.05.27 1.0.0 Copyright 2000-2007 Kenneth M. Chipps PhD www.chipps.com 1.

How to Build a CAN Last Update Copyright Kenneth M. Chipps PhD 1.
Module 9 PS-M4110 Overview <Place supporting graphic here>

Module 9 PS-M4110 Overview <Place supporting graphic here>
DSL 305 Series ADSL Modem. Types of DSL305 series DSL305E ADSL Modem  PPP Half-Bridge (Default)  Transparent Bridge DSL305EU ADSL Router/Modem.

DSL 305 Series ADSL Modem. Types of DSL305 series DSL305E ADSL Modem  PPP Half-Bridge (Default)  Transparent Bridge DSL305EU ADSL Router/Modem.
Ch. 5 – Access Points. Overview Access Point Connection.

Ch. 5 – Access Points. Overview Access Point Connection.
Module 12 MXL DCB <Place supporting graphic here>

Module 12 MXL DCB <Place supporting graphic here>
Semester 1 Module 5 Cabling LANs and WANs. Ethernet Standards.

Semester 1 Module 5 Cabling LANs and WANs. Ethernet Standards.
1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration.

1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration.
1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration Cisco Networking Academy.

1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration Cisco Networking Academy.
1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration.

1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration.
Ethernet and Wifi Chapter 7 & 8. Send and Receive Data network adapter or network interface NIC card the most common wired Ethernet network interfaces.

Ethernet and Wifi Chapter 7 & 8. Send and Receive Data network adapter or network interface NIC card the most common wired Ethernet network interfaces.

Similar presentations

Ads by Google